1. Introduction
Thank you for purchasing the Tzumi ION Heated Mug. This manual provides essential information for the safe and efficient operation of your new heated mug. Please read these instructions thoroughly before use and retain them for future reference.
2. Safety Information
- Read all instructions before using the appliance.
- Do not immerse the mug or charging coaster in water or other liquids.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Use only with the provided charging coaster.
- Do not use the mug in a microwave oven or on a stovetop.
- Avoid contact with hot surfaces. Use handles or knobs.
- Unplug the charging coaster from the outlet when not in use and before cleaning.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
- Do not use outdoors.
- Always ensure the mug is placed securely on the charging coaster.
- Hand wash only. Do not place in a dishwasher.
3. Package Contents
- Tzumi ION Heated Mug (Model 7560)
- Charging Coaster
- Mug Lid
4. Product Overview
The Tzumi ION Heated Mug is designed to keep your beverages at your preferred warm temperature. It consists of the mug itself, which features an integrated heating element and a digital display, and a charging coaster that powers the mug and maintains its temperature.
Figure 1: Tzumi ION Heated Mug with Charging Coaster. The mug features a digital display for temperature indication.
Figure 2: Product packaging highlighting key features such as adjustable temperature levels (135°F, 140°F, 145°F) and 24-hour heat control.
5. Setup
- Unpack all components from the box.
- Place the charging coaster on a flat, stable, and dry surface.
- Plug the power cord of the charging coaster into a standard electrical outlet.
- Ensure the mug is clean and dry before first use.
6. Operating Instructions
- Fill the Mug: Pour your desired beverage into the mug. Do not overfill.
- Place on Coaster: Carefully place the filled mug onto the charging coaster. Ensure it is seated correctly. The mug's display should illuminate.
- Power On/Adjust Temperature: The mug will automatically begin heating when placed on the coaster. The digital display will show the current temperature or a default setting. To adjust the temperature, gently tap the touch-sensitive area on the mug (if applicable, or refer to specific button if present). The available temperature settings are typically 135°F, 140°F, and 145°F.
- Maintain Temperature: The mug will maintain the selected temperature for up to 24 hours when continuously placed on the charging coaster.
- Power Off: Remove the mug from the coaster to stop heating. The coaster will remain powered on until unplugged.
7. Maintenance and Care
- Cleaning the Mug: The Tzumi ION Heated Mug is hand wash only. Do not submerge the mug in water. Use a soft sponge and mild detergent to clean the interior and exterior. Rinse thoroughly and dry completely before placing back on the coaster.
- Cleaning the Coaster: Unplug the charging coaster before cleaning. Wipe the surface with a soft, damp cloth. Do not use abrasive cleaners or immerse the coaster in water.
- Storage: When not in use for extended periods, unplug the coaster and store both the mug and coaster in a dry, safe place.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mug not heating | Coaster not plugged in; Mug not properly seated; Power outage. | Ensure coaster is plugged into a working outlet; Reposition mug on coaster; Check power supply. |
| Display not illuminating | Similar to not heating; Mug or coaster malfunction. | Verify power connection; Ensure mug is correctly placed; Contact customer support if issue persists. |
| Beverage not hot enough | Incorrect temperature setting; Mug removed from coaster too long. | Adjust temperature setting to a higher level; Keep mug on coaster for continuous heating. |
9. Specifications
- Model: Tzumi ION Heated Mug 7560
- Brand: Tzumi
- Material: Acrylic
- Capacity: Approximately 12 Oz. / 355 ml (as indicated on packaging)
- Dimensions (Mug): Approximately 15.24 x 15.24 x 20.32 cm (L x W x H)
- Item Weight: Approximately 779 g
- Adjustable Temperature Levels: 135°F, 140°F, 145°F
- Heat Control: Up to 24 hours (when continuously on coaster)
- Care Instructions: Hand Wash Only
10. Warranty and Support
For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Tzumi website. Contact information for customer service can typically be found on the product packaging or the manufacturer's website.
