RENPHO PUK-R-X001-WH Heated Foot Spa Massager User Manual

Introduction

This manual provides detailed instructions for the safe and effective use of your RENPHO PUK-R-X001-WH Heated Foot Spa Massager. Please read all instructions carefully before operation and retain this manual for future reference. This device is designed to provide a relaxing and therapeutic foot massage experience through heat, bubbles, and mechanical rollers.

Important Safety Instructions

When using electrical appliances, especially when children are present, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury:

• Always unplug the appliance from the electrical outlet immediately after using and before cleaning.
• Do not reach for an appliance that has fallen into water. Unplug it immediately.
• Do not use while bathing or in a shower.
• Do not place or store the appliance where it can fall or be pulled into a tub or sink.
• Do not place in or drop into water or other liquid.
• This appliance should never be left unattended when plugged in.
• Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabled persons.
• Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
• Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Contact customer service for examination and repair.
• Keep the cord away from heated surfaces.
• Never use while sleeping or drowsy.
• Never drop or insert any object into any opening.
• Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
• Do not use on sensitive skin areas or where circulation is poor.
• The use of the massager should be pleasant and comfortable. Should pain or discomfort result, discontinue use and consult your physician.
• This product is equipped with a GFCI (Ground Fault Circuit Interrupter) plug for enhanced safety. A GFCI plug automatically cuts power if it detects an electrical fault, reducing the risk of electric shock.

Product Overview

The RENPHO PUK-R-X001-WH Foot Spa Massager is designed to provide a comprehensive foot relaxation experience. It combines several features to soothe tired feet and promote well-being.

Key Features:

• Heated Water Function: Maintains a constant water temperature between 35°C and 48°C (95°F - 118°F) for optimal comfort.
• Bubble Massage: Generates oxygen bubbles to gently massage and relax your feet.
• Red Light Therapy: Integrated red light helps to relieve fatigue and enhance comfort.
• Motorized Rolling Massagers: Six motorized rollers stimulate acupressure points on the soles of your feet.
• Pumice Stone: A built-in pumice stone helps to remove calluses and dead skin cells.
• Adjustable Timer: Set the automatic shut-off timer from 10 to 60 minutes in 10-minute increments.
• Leak Protection Switch: ETL certified safety switch for secure operation.
• Portable Design: Equipped with 4 universal wheels (2 lockable) and a drain plug for easy movement and emptying.

Setup Instructions

1. Placement: Place the foot spa on a flat, stable surface. Ensure there is enough space around the unit for comfortable use and to prevent spills.
2. Fill with Water: Fill the foot spa with warm or cold water up to the maximum fill line indicated inside the basin. Do not overfill.
3. Add Additives (Optional): If desired, you may add foot salts, essential oils, or other foot spa additives to the small medicine box located inside the basin. Ensure the box is securely closed.
4. Connect Power: Plug the GFCI power cord into a suitable electrical outlet. Ensure the GFCI plug is functioning correctly (test button may be present).
5. Positioning: Sit comfortably in a chair and carefully place your feet into the foot spa.

Operating Instructions

The control panel allows you to customize your foot spa experience. Refer to the image below for button identification and functions.

1. Power On/Off: Press the POWER button to turn the unit on or off. The display will show the current water temperature.
2. Temperature Adjustment: Use the TEMP + and TEMP - buttons to set your desired water temperature. The temperature range is 35°C to 48°C (95°F - 118°F). The unit will heat the water to and maintain this temperature.
3. Bubble Function: Press the SPA button to activate or deactivate the bubble massage and red light function.
4. Massage Function: Press the MASSAGE button to cycle through the three electric massage speed options for the rolling massagers. Press again to turn off the massage function.
5. Timer Setting: Press the TIME button to set the automatic shut-off timer. You can choose between 10, 20, 30, 40, 50, or 60 minutes. The unit will automatically turn off once the set time has elapsed.

Maintenance and Storage

Cleaning:

• Always unplug the unit before cleaning.
• After each use, drain the water using the drain plug located at the bottom of the unit.
• Wipe the basin with a soft, damp cloth and a mild, non-abrasive cleaner.
• Rinse thoroughly and dry completely before storage.
• Do not immerse the entire unit in water or other liquids.

Storage:

• Store the foot spa in a cool, dry place, away from direct sunlight.
• Do not wrap the power cord around the unit.
• Keep out of reach of children.

Troubleshooting

If you encounter any issues with your RENPHO Foot Spa Massager, please refer to the table below for common problems and their solutions.

Product Specifications

Warranty and Customer Support

RENPHO products are designed with quality and reliability in mind. For information regarding warranty coverage, product support, or any operational questions not covered in this manual, please contact RENPHO customer service. Contact details can typically be found on the official RENPHO website or on the product packaging.

Please have your model number (PUK-R-X001-WH) and purchase information ready when contacting support.