Introduction
Thank you for choosing the Seafrogs Underwater Camera Housing for your Olympus TG-6 camera. This housing is designed to protect your camera and allow for underwater photography and videography down to a depth of 60 meters (195 feet). Please read this manual thoroughly before using the product to ensure proper operation and maintenance, which will help prevent damage to your camera and the housing.
Product Overview
The Seafrogs TG-6 Underwater Camera Housing is constructed from durable polycarbonate, ABS plastic, stainless steel, EPDM rubber, and clear plate glass, ensuring robust protection for your camera in challenging underwater environments. It features a secure design with O-ring sealed buttons and a spring-loaded mechanism for watertight integrity.
Image: Seafrogs Underwater Camera Housing for Olympus TG-6 (white model).
Key Features:
- Depth Rating: Waterproof up to 60m (195ft).
- Compatibility: Specifically designed for the Olympus TG-6 camera.
- Accessory Threads: Double-threaded front (52mm & 67mm) for lens accessories.
- Fiber Optic Ports: Dual Sea&Sea type fiber-optic ports for external strobes.
- Leak Detection: Inbuilt leak detection sensor for enhanced safety.
- Mounting: Stainless steel mounting plate with a standard 1/4" size.
- Certifications: ISO9001, CE, and IPx8 certified.
Image: Illustration of the housing's triple waterproof technology, including two waterproof rings, a warning light, and a warning sound for leak detection.
What's in the Box:
- Camera Housing (1)
- Wrist Strap (1)
- Shoulder Strap (1)
- Spare O-ring (1)
- User Manual (1)
- O-ring Removal Tool (1)
- Cleaning Cloth (1)
Image: Visual representation of all items included in the product package.
Setup
1. Pre-Dive Checks:
- Inspect the housing for any signs of damage, cracks, or debris.
- Ensure the main O-ring is clean, free of hair or sand, and properly seated in its groove. Lightly lubricate the O-ring with silicone grease if necessary.
- Check all buttons and controls for smooth operation.
- Perform a dry test: Close the empty housing and submerge it in shallow water for at least 30 minutes to check for leaks.
2. Camera Installation:
- Ensure your Olympus TG-6 camera is clean and dry.
- Open the housing by disengaging the safety lock and opening the latches.
- Carefully slide the camera into the housing, ensuring it aligns correctly with the internal mounting plate and control buttons.
- Confirm that the camera's lens is centered within the housing's port.
Image: The housing opened, revealing the internal compartment where the Olympus TG-6 camera is to be placed.
3. Sealing the Housing:
- Close the housing door, ensuring the O-ring is not pinched.
- Engage the latches securely.
- Activate the safety lock to prevent accidental opening.
- If using a vacuum detection system (sold separately), attach it to the housing's vacuum port and follow its instructions to confirm a perfect seal.
Image: The housing showing the port for an optional vacuum detection system, which helps verify the waterproof seal before diving. Note: Vacuum pump is not included.
Operating
1. Underwater Use:
- Before entering the water, ensure all housing controls are functioning correctly.
- Submerge the housing slowly to check for any immediate leaks. If a leak is detected, surface immediately and inspect the O-ring and seals.
- Operate the camera controls gently.
- Monitor the leak detection sensor (if equipped) during your dive.
Image: The housing being used by a diver, illustrating its capability to function at depths up to 60 meters while maintaining high-definition image quality.
2. Button Functions and Controls:
The housing provides access to essential camera functions through its external buttons. Familiarize yourself with the layout before diving.
- Shutter Button: Located on the top right, for capturing photos and starting/stopping video recording.
- Control Buttons: Access to camera menu, playback, and other settings.
- Zoom Lever: Controls the camera's zoom function. Ensure smooth operation before use.
Image: Close-up showing the shutter button, 67mm/52mm thread interface, cold shoe mount, stainless steel 1/4" bracket, control buttons, dual fiber optic ports, and safety lock.
3. Accessory Ports:
- Dual Fiber Optic Ports: Connect external strobes or lights using Sea&Sea type fiber optic cables for improved underwater lighting.
- Threaded Port (52mm & 67mm): Attach wet lenses, filters, or other compatible accessories to the front port.
- Cold Shoe Mount: Mount additional accessories like focus lights or external monitors.
Maintenance
1. Post-Dive Care:
- Rinse the housing thoroughly with fresh water immediately after each dive. Do not use hot water.
- Actuate all buttons and rotate controls while rinsing to flush out any salt or debris.
- Dry the housing completely with a soft, lint-free cloth.
2. O-Ring Maintenance:
- Remove the main O-ring using the provided O-ring removal tool.
- Inspect the O-ring for any nicks, cuts, or deformities. Replace if damaged.
- Clean the O-ring and its groove with a soft cloth.
- Apply a thin, even layer of silicone grease to the O-ring. Do not over-lubricate.
- Reinstall the O-ring carefully, ensuring it is seated correctly without twisting.
3. Storage:
- Store the housing in a cool, dry place away from direct sunlight.
- It is recommended to store the housing with the main O-ring removed or with the latches unfastened to prevent compression set.
- Keep the housing away from chemicals or solvents that could damage the materials.
Troubleshooting
1. Leakage:
- Cause: Improperly seated O-ring, dirty O-ring/groove, damaged O-ring, or foreign object.
- Solution: Immediately surface. Disassemble, clean, inspect, and re-lubricate the O-ring. Ensure no debris is present. Perform a dry test before re-entering water.
2. Zoom Lever Malfunction:
- Cause: Misalignment of the camera within the housing, or internal mechanism issue.
- Solution: Ensure the camera is perfectly aligned and securely seated. If the issue persists, check for any obstructions or contact customer support.
3. Buttons Sticking:
- Cause: Salt crystal buildup or debris.
- Solution: Rinse thoroughly with fresh water, actuating the buttons repeatedly during rinsing. If persistent, a small amount of silicone grease can be applied to the button shafts.
Specifications
| Feature | Specification |
|---|---|
| Brand | Seafrogs |
| Model | TG-6 |
| Compatibility | Olympus TG-6 Camera |
| Water Resistance Level | 60m (195ft) |
| Material | Polycarbonate, ABS Plastic, Stainless Steel, EPDM Rubber, Clear Plate Glass |
| Front Port Thread | 52mm & 67mm |
| Fiber Optic Ports | Dual Sea&Sea Type |
| Mounting Plate | Stainless Steel 1/4" |
| Certifications | ISO9001, CE, IPx8 |
Warranty and Support
Warranty Information:
This Seafrogs Underwater Camera Housing comes with a 3-month warranty from the date of purchase. The warranty covers manufacturing defects. It does not cover damage caused by improper use, lack of maintenance, or accidental damage. Please retain your proof of purchase for warranty claims.
Customer Support:
For technical assistance, troubleshooting, or warranty inquiries, please refer to the contact information provided with your purchase documentation or visit the official Seafrogs website. Always provide your product model and purchase date when contacting support.
