Product Overview
The Moen Cia Widespread 2-Handle High-Arc Bathroom Faucet, model T6222BG, is designed for 3-hole bath sink installations. It features a brushed gold finish and two lever handles for precise control of water temperature and flow. This faucet is WaterSense certified, promoting water conservation without compromising performance.
Key Features
- Temperature Control: Two-handle lever handles allow for easy adjustment of water temperature.
- Brushed Gold Finish: Features a mix of classic gold tones and modern brushed texture.
- Flexible Design: Can be installed with a widespread configuration between 8 to 16 inches.
- Certified Safe: Complies with Federal Safe Drinking Water Act and NSF 61 standards.
- WaterSense Certified: Meets EPA WaterSense criteria for water conservation.
- Coordinating Collection: Designed to complement other faucets and accessories in the Cia Collection.
Important Pre-Installation Information
Before beginning installation, ensure you have all necessary components and tools. A Moen valve 9000 is required for complete installation and is sold separately. Verify that your sink has a 3-hole configuration suitable for a widespread faucet.
This image illustrates the valve assembly (Moen valve 9000) that is essential for the proper function and installation of the faucet. This component must be acquired separately.
Recommended Tools and Materials
- Adjustable wrench
- Phillips and flathead screwdrivers
- Plumber's putty or silicone sealant
- Safety glasses
- Flashlight
- Towels
- Moen valve 9000 (sold separately)
Installation Instructions
Step 1: Prepare the Sink Area
- Turn off the main water supply to the sink.
- Clear the area under the sink for access.
- Remove any existing faucet and thoroughly clean the mounting surface.
Step 2: Install the Valve Body
Refer to the detailed installation instructions provided with your Moen valve 9000 for proper installation of the valve body. Ensure all connections are secure and watertight before proceeding.
Step 3: Install the Faucet Spout and Handles
- Position the faucet spout and handle assemblies into the pre-drilled 3-holes on your sink or countertop. The widespread design allows for flexible spacing between 8 to 16 inches.
- Secure the faucet components from underneath the sink using the provided mounting hardware. Ensure they are tightened evenly to prevent wobbling.
- Connect the hot and cold water supply lines to the corresponding inlets on the valve body. Use an adjustable wrench to tighten connections firmly, but avoid overtightening.
- Install the drain assembly according to its specific instructions, ensuring a watertight seal.
Step 4: Test for Leaks
- Slowly turn on the main water supply.
- Carefully check all connections for any signs of leaks. Tighten any leaking connections as needed.
- Operate the faucet handles to ensure proper water flow and temperature control from both hot and cold lines.
Operating Instructions
The Moen Cia faucet features two lever handles for precise control over water flow and temperature.
- To turn on the water, lift the lever handles.
- To adjust water temperature, move the left handle for hot water and the right handle for cold water.
- To increase or decrease water flow, adjust the height of the lever handles.
- To turn off the water, push the lever handles down.
This image shows the Moen Cia faucet with water flowing, demonstrating its high-arc design and ease of use.
Maintenance and Care
To maintain the brushed gold finish and ensure long-lasting performance of your Moen Cia faucet, follow these care guidelines:
- Cleaning: Clean regularly with a soft, damp cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- Drying: Always dry the faucet after use to prevent water spots and mineral buildup, especially in hard water areas.
- Avoid Polishes: Do not use polishes or waxes unless specifically designed for brushed gold finishes.
This image highlights the brushed gold finish, emphasizing the importance of proper care to preserve its appearance.
Troubleshooting
Common Issues and Solutions
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Aerator clogged with debris | Remove and clean the aerator. |
| Leaking from Spout | Worn out O-rings or cartridges | Replace O-rings or cartridges. (Consult Moen support or a qualified plumber). |
| Leaking at Base | Loose mounting nuts or improper sealant | Tighten mounting nuts and/or reapply plumber's putty/silicone sealant. |
| Difficulty Adjusting Temperature | Faulty cartridge or mineral buildup | Clean or replace the cartridge. (Consult Moen support). |
Specifications
| Feature | Detail |
|---|---|
| Brand | Moen |
| Model Number | T6222BG |
| Color | Brushed Gold |
| Material | Metal |
| Number of Handles | 2 |
| Mounting Type | Deck Mount |
| Hole Count | 3 |
| Installation Type | Widespread (8" to 16" spread) |
| Spout Design | High Arc |
| Spout Height | 6.4 Inches |
| Spout Reach | 5.5 Inches |
| Maximum Flow Rate | 1.2 Gallons Per Minute |
| Included Components | Bathroom Faucet trim kit, Drain, Instruction Manual |
| Item Weight | 4.18 Pounds |
| Product Dimensions | 5.5 x 13.75 x 9 inches |
| Certifications | WaterSense Certified, Federal Safe Drinking Water Act, NSF 61 standards |
Warranty and Support
Limited Lifetime Warranty
Moen offers a Limited Lifetime Warranty on this faucet to the original consumer purchaser against leaks, drips, and finish defects during normal residential use. For commercial installations, a 5-year limited warranty applies.
For detailed warranty information, product support, or to order replacement parts, please visit the official Moen website or contact Moen customer service.
Manufacturer: Moen Incorporated
UPC: 026508336212
