MOEN
Buy it for looks. Buy it for life.®
Specifications
ALIGN™ Single Handle Single Hole Mount High Arc Kitchen Faucet
Models: 7365 series, 7165 series with spray
FAUCET DESCRIPTION
- Metal construction with various finishes identified by suffix.
- High arc spout provides the height and reach to fill or clean large pots.
- Flexible supply lines with 3/8" compression fittings.
- 360° rotating spout.
- Faucet designed for handle to be mounted on right side.
OPERATION
- Single handle lever.
- Temperature controlled by 100° arc of handle travel.
FLOW
Spout flow is limited to 1.5 gpm (5.7 L/min) max at 60 psi.
CARTRIDGE
1255™ Duralast™ cartridge for Single-Handle Faucets.
STANDARDS
- Third party certified to ASME A112.18.1/CSA B125.1 and all applicable requirements referenced therein including NSF 61/9G.
- Complies with California Proposition 65 and with the Federal Safe Drinking Water Act.
ADA
[ADA compliant for lever handle]
WARRANTY
- Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser.
- 5 year warranty if used in commercial installations.
INSTALLATION NOTE
NOTE: 7165 FAUCET IS DESIGNED TO BE INSTALLED THRU 2 HOLES, 1-1/2" (38mm) MIN. DIA. FOR VALVE, & 1-1/4" (32mm) MIN. DIA. HOLE FOR SIDE SPRAY (OPTIONAL 3-HOLE ESCUTCHEON 141002 AVAILABLE).
CRITICAL DIMENSIONS
(DO NOT SCALE)
General Faucet Dimensions:
- Spout Reach: 8 inches (203mm)
- Spout Height: 9-5/8 inches (244mm)
- Overall Height: 15-5/16 inches (389mm)
- Handle Height: 4-11/16 inches (119mm)
- Handle Diameter: 7/8 inches (19mm)
- Spout Base Diameter: 3-1/2 inches (89mm)
Mounting and Deck Dimensions:
- Maximum Deck Thickness: 2-1/2 inches (63mm)
- Required Hole for Valve/Faucet Base: 1-1/2 inches (38mm) minimum diameter.
- Required Hole for Side Spray (if applicable): 1-1/4 inches (32mm) minimum diameter.
Other Shown Dimensions:
- Height from deck to spout base: 4-13/16 inches (122mm)
- Height from deck to spout outlet: 2 inches (51mm)
- Handle height from deck: 6-15/16 inches (176mm)
- Spout reach from center: 3-1/2 inches (89mm)
The diagram also indicates a "GREEN UPC" certification mark.
ORDERING INFORMATION
To order parts, call: 1-800-BUY-MOEN
Visit: www.moen.com