Introduction
Thank you for choosing the KEMEI KM-6776 Electric Shaver. This multi-functional grooming device is designed for efficient and comfortable shaving of hair, beard, and nose. Please read this manual thoroughly before first use to ensure proper operation, maintenance, and safety.
Important Safety Information
Always use the shaver on dry skin and avoid using it while charging. Be cautious while using the rotary head to prevent cuts. After each use, clean the shaver thoroughly and allow it to dry completely to prevent bacterial growth.
- Keep the appliance dry. Do not immerse in water.
- Do not use if the appliance or charging cable is damaged.
- Keep out of reach of children.
- Only use the provided charging cable.
Product Overview
The KEMEI KM-6776 is a versatile 3-in-1 grooming system featuring an advanced contour following system and magic stainless steel blades for effective hair removal. It is powered by a silver Pd alloy motor for high rotational speed.
Figure 1: KEMEI KM-6776 Electric Shaver Packaging Box. This image displays the product box, highlighting key features such as "3 IN 1 Grooming" and "Advanced Contour Following System," along with the model number KM-6776.
Components:
Figure 2: KEMEI KM-6776 Electric Shaver with Attachments. This image shows the main shaver body, a precision trimmer attachment, and a nose/ear hair trimmer attachment.
- Main Shaver Body: Contains the motor, battery, and power switch.
- Foil Shaver Head: For close shaving of beard and facial hair.
- Precision Trimmer Attachment: For detailing and trimming longer hair.
- Nose/Ear Hair Trimmer Attachment: For safe and comfortable removal of unwanted nose and ear hair.
- Charging Cable: For recharging the shaver's internal battery.
- Cleaning Brush: For removing hair residue from the blades.
Setup and Charging
Initial Charge:
Before first use, fully charge the shaver for approximately 8 hours. Connect the charging cable to the shaver and plug it into a suitable power outlet. The charging indicator light will illuminate.
Attaching/Detaching Heads:
- To attach a head: Align the desired attachment with the shaver body and press firmly until it clicks into place.
- To detach a head: Gently pull the attachment away from the shaver body.
Operating Instructions
Ensure the shaver is fully charged before use. Press the power button to turn the shaver on or off.
1. For Beard and Facial Hair Shaving:
- Attach the foil shaver head.
- Hold the shaver at a right angle to your skin.
- Move the shaver in short, circular motions against the direction of hair growth.
- Stretch your skin with your free hand to ensure a close shave.
2. For Hair Trimming (Precision Trimmer):
- Attach the precision trimmer head.
- Use for detailing sideburns, necklines, or trimming longer beard hair before shaving.
- Move the trimmer slowly and steadily against the direction of hair growth.
3. For Nose and Ear Hair Trimming:
- Attach the nose/ear hair trimmer head.
- Gently insert the trimmer tip into your nostril or ear canal.
- Move the trimmer in a circular motion to cut unwanted hair. Do not insert too deeply.
Maintenance and Cleaning
Regular cleaning ensures optimal performance and extends the life of your shaver.
- Turn off the shaver and disconnect it from the power source.
- Detach the shaver head.
- Use the provided cleaning brush to remove hair clippings from the blades and inside the shaver head.
- For a more thorough clean, the shaver heads can be rinsed under running water. Ensure they are completely dry before reattaching or storing.
- Do not use abrasive cleaners or solvents.
- Store the shaver in a dry place, away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Shaver does not turn on. | Battery is depleted. | Charge the shaver for at least 8 hours. |
| Poor shaving performance. | Blades are dull or clogged with hair. | Clean the shaver head thoroughly. Consider replacing the blades if they are old. |
| Shaver pulls hair. | Battery is low; blades are dull or dirty. | Charge the shaver. Clean the blades. Ensure hair is dry before shaving. |
| Excessive noise or vibration. | Shaver head not properly attached or internal issue. | Ensure the shaver head is securely attached. If the problem persists, contact customer support. |
Specifications
- Model Number: KM-6776
- Brand: KEMEI
- Type: Multi Usage (Hair, Beard, Nose)
- Targeted Group: Men
- Operating Function: Dry
- Number of Heads: 1 (with multiple attachments)
- Power Source: Electric & Battery (Rechargeable)
- Number of Speed Settings: 1
- Blade Material: Stainless Steel
- Head Type: Rotary (for nose/ear), Foil (for shaving)
- Manufacturer: Kemei
- Package Dimensions: 19.8 x 10.8 x 4.8 cm
- Weight: 326 g
Warranty and Support
KEMEI products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your purchase or contact your local KEMEI distributor. Keep your proof of purchase for warranty claims.
For further assistance, please visit the official KEMEI website or contact customer service through the retailer where the product was purchased.
