Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your DORTALA 3-Tier End Table with Drawer. Please read this guide thoroughly before assembly and retain it for future reference. This end table is designed to offer practical storage and display solutions for various living spaces.
Safety Information
- Keep all small parts and packaging materials away from children and pets.
- Assemble the product on a soft, clean surface to prevent scratches.
- Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as needed.
- Do not overload the table or shelves beyond their specified weight capacities.
- Avoid placing hot items directly on the surface without protection.
- Do not stand or climb on the table.
Package Contents
Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Table Top
- Drawer Components (Front, Back, Sides, Bottom)
- Drawer Knobs
- Side Panels with Shelf Supports
- Bottom Shelf
- Middle Shelf
- Hardware Pack (Screws, Dowels, Drawer Slides)
- Assembly Guide (this document)
Image: Key components including drawer slide, knob, and feet.
Assembly Instructions (Setup)
Follow these steps carefully to assemble your end table. It is recommended to have a second person assist with assembly for stability.
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a soft, clean surface and compare them against the package contents list and diagrams in the assembly guide.
- Assemble the Drawer: Attach the drawer sides to the drawer front and back using the provided screws and dowels. Insert the drawer bottom into the grooves. Secure the drawer knob to the drawer front.
- Install Drawer Slides: Attach the drawer slides to the assembled drawer and the designated side panels of the table frame according to the instructions in the included assembly guide. Ensure they are aligned for smooth operation.
- Attach Side Panels: Connect the side panels to the table top using screws. Ensure the pre-drilled holes align correctly.
- Insert Shelves: Slide the middle and bottom shelves into the grooves or attach them to the supports on the side panels. Secure with screws if applicable.
- Final Assembly: Attach the remaining side panel to complete the frame. Insert the assembled drawer into its compartment.
- Tighten All Fasteners: Once fully assembled, gently tighten all screws and fasteners to ensure stability. Do not overtighten.
Image: Detail of drawer slide mechanism for smooth operation.
Usage (Operating)
The DORTALA 3-Tier End Table is designed for versatile use in various indoor settings.
- Placement: Position the table on a flat, stable surface. It is suitable for living rooms, bedrooms, offices, or guest rooms as an end table, nightstand, or accent table.
- Storage: Utilize the drawer for storing small items such as remote controls, keys, or personal accessories. The open shelves are ideal for books, decorative items, or small electronic devices.
- Weight Capacity: Adhere to the specified weight capacities for the table top, shelves, and drawer to ensure longevity and safety.
Image: Examples of table placement in different rooms.
Maintenance
Proper care will extend the life and appearance of your DORTALA end table.
- Cleaning: Wipe surfaces with a damp cloth, then immediately dry with a clean, dry cloth. Avoid abrasive cleaners or harsh chemicals.
- Spills: Clean up spills immediately to prevent staining or damage to the finish.
- Fasteners: Periodically check all screws and connections and re-tighten them as necessary to maintain structural integrity.
- Sunlight Exposure: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly. | Loose fasteners; uneven floor. | Ensure all screws are tightened. Adjust table position or use shims under legs if the floor is uneven. |
| Drawer does not slide smoothly. | Drawer slides misaligned; obstruction in the track. | Check that drawer slides are correctly installed and aligned. Remove any debris from the tracks. |
| Parts missing or damaged. | Packaging error or shipping damage. | Do not proceed with assembly. Contact DORTALA customer support immediately for replacement parts. |
Specifications
Image: Product dimensions and weight capacities.
- Model: DORTALA Moderne
- Material: Engineered Wood (MDF)
- Color: Black
- Product Dimensions (L x W x H): 23.5 inches x 12 inches x 24 inches (60 cm x 30.5 cm x 61 cm)
- Drawer Dimensions (W x L x H): 5.5 inches x 11.5 inches x 2.5 inches
- Table Top Weight Capacity: 90 lbs (40.8 kg)
- Single Shelf Weight Capacity: 22 lbs (10 kg)
- Drawer Weight Capacity: 22 lbs (10 kg)
- Net Weight: 23.5 lbs (10.7 kg)
- Certifications: TSCA Title VI Compliant
Warranty and Support
For warranty information or assistance with your DORTALA product, please contact DORTALA customer support. Refer to your purchase documentation for specific warranty terms and contact details.
Customer Support: For any questions, missing parts, or issues, please visit the official DORTALA store or contact their customer service through the retailer where the product was purchased. You can often find support contact information on the product's listing page or the manufacturer's website.
Online Resources: For additional information and product updates, visit the DORTALA Store on Amazon.
