1. Important Safety Information
Please read all instructions carefully before installation and use. Retain this manual for future reference.
- Electrical Safety: Always turn off the main power supply at the circuit breaker before beginning any electrical work. If you are unsure about electrical installation, consult a qualified electrician.
- Bulb Requirements: This fixture uses G9 bulbs. Bulbs are NOT included. To utilize dimming capabilities, use dimmable G9 bulbs and a compatible dimmer switch (not included).
- Indoor Use Only: This chandelier is designed for indoor use in dry locations. Do not expose to moisture or direct water.
- Weight: Ensure the ceiling junction box and mounting hardware can safely support the weight of the chandelier.
2. Product Overview
Features:
- Unique Dandelion Design: Features a gold-plated finish with radiating K9 crystal beads, creating a firework or dandelion effect.
- K9 Crystal Beads: Nano-cutting crystal beads are smooth, shiny, and refract light beautifully.
- G9 Bulb Base: Compatible with G9 bulbs for versatile lighting options.
- Adjustable Height: The hanging wire length is adjustable up to 47 inches (120 cm), allowing customization for various ceiling heights.
- Easy Installation: The chandelier comes pre-wired for simplified assembly and installation.
What's in the Box:
- Accessories Package (includes mounting hardware and crystal strings)

Image 2.1: The SineRise 8-Light Gold Dandelion Firework Crystal Chandelier.

Image 2.2: Detailed dimensions of the chandelier, showing a 15.7 inch (40 cm) width and height, with an adjustable hanging wire up to 47 inches (120 cm).

Image 2.3: Close-up view of the chandelier's stable base, K9 crystal beads, electroplated golden metal finish, and G9 bulb base.
3. Setup and Installation
This chandelier is designed for semi-flush mount installation. Professional installation is recommended.
- Prepare for Installation: Turn off power at the circuit breaker. Ensure the mounting surface is clean and secure.
- Install Bulbs: Insert G9 bulbs (not included) into each of the 8 bulb bases.
- Attach Crystal Strings: Carefully screw each crystal string into the designated holes on the central sphere of the chandelier.
- Mount to Ceiling: Follow standard semi-flush mount installation procedures to secure the chandelier to the ceiling junction box. Adjust the hanging wire length as needed before final tightening.
- Remove Plastic Rings: After all crystal strings are in place, carefully cut and remove any plastic rings or ties used for packaging the crystal strings.

Image 3.1: Visual guide for the 3-step installation process: installing bulbs, attaching crystal branches, and cutting plastic rings.
Video 3.1: Official SineRise video demonstrating the assembly and installation of a modern crystal chandelier.
Video 3.2: Official SineRise video showcasing the Firework Crystal Chandelier and its features.
4. Operating Instructions
Once installed and power is restored, the chandelier can be operated via your wall switch. If a dimmer switch and dimmable G9 bulbs are used, you can adjust the light intensity.

Image 4.1: The chandelier shown in both the off and on states, demonstrating its illumination.
5. Maintenance
To maintain the appearance and functionality of your chandelier, follow these guidelines:
- Cleaning: Turn off power before cleaning. Use a soft, dry cloth to gently wipe the metal and crystal components. Avoid abrasive cleaners or chemicals that may damage the finish or crystals.
- Bulb Replacement: Ensure power is off before replacing bulbs. Allow bulbs to cool completely before handling. Replace with G9 bulbs of the correct wattage.
- Inspection: Periodically check all connections and components for tightness and wear.
6. Troubleshooting
If you encounter issues with your chandelier, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply; Loose wiring; Faulty bulb | Check circuit breaker; Ensure all wires are securely connected; Replace bulb(s). |
| Lights flicker | Loose bulb; Incompatible dimmer switch/bulb; Wiring issue | Tighten bulbs; Ensure dimmer and bulbs are compatible; Check wiring connections. |
| Chandelier is unstable | Loose mounting hardware | Ensure ceiling canopy and mounting bracket are securely fastened. |
If the issue persists after trying these solutions, please contact customer support.
7. Specifications
- Brand: SineRise
- Model Number: SR-FWDC-8L-GLD
- Color: Gold
- Material: Crystal, Metal
- Style: Modern
- Light Fixture Form: Chandelier
- Room Type: Bedroom, Dining Room, Home Office, Kitchen, Living Room
- Product Dimensions: 16"L x 15.7"W x 15.7"H
- Specific Uses For Product: Indoor use only; Illumination; Home Decoration
- Power Source: AC
- Installation Type: Semi Flush Mount
- Light Source Type: Energy Efficient; LED (with compatible bulbs)
- Finish Type: Plated
- Shade Material: Metal & Crystal
- Number of Light Sources: 8
- Voltage: 110 Volts
- Bulb Base: G9
- Wattage: 25 Watt-hours (Maximum Compatible Wattage)
- Assembly Required: Yes
- Item Weight: 3.72 pounds
8. Warranty and Support
SineRise provides a 12-Month Replacement Guarantee for this product. If you experience any issues or require assistance, please contact SineRise customer support for a high-quality shopping experience and resolution.
For further support, please visit the official SineRise store on Amazon: SineRise Lighting Store