Introduction
This instruction manual provides essential information for the safe and effective use, cleaning, and maintenance of your Philips Avent Natural Baby Bottles with Natural Response Nipples. These bottles are designed to support your baby's natural feeding rhythm, mimicking breastfeeding by releasing milk only when your baby actively drinks.
The Natural Response nipple features a unique opening and tip that allows your baby to control the pace of milk flow. When your baby pauses to swallow and breathe, milk flow stops, similar to natural breastfeeding. An integrated anti-colic valve helps reduce discomfort by directing air away from your baby's tummy.
Product Components
Your Philips Avent Natural Baby Bottle set includes the following components:
- Bottle (4oz / 125ml)
- Natural Response Nipple (Slow Flow, Flow 2)
- Screw Ring
- Cap
Image: A 4-pack of Philips Avent Natural Baby Bottles, showing the bottles, nipples, screw rings, and caps, along with the product packaging.
Before First Use
Before using the bottles for the first time, disassemble all parts and clean them thoroughly. Sterilize all components according to the instructions in the Cleaning and Sterilization section.
Assembly
Follow these steps to assemble your Philips Avent Natural Baby Bottle:
- Ensure all parts are clean and sterilized.
- Place the Natural Response nipple into the screw ring. Pull the nipple firmly until it is securely seated.
- Screw the assembled nipple and screw ring onto the bottle until it is tight.
- Place the cap over the nipple to keep it hygienic when not in use or during travel.
Operating Instructions
Feeding with Natural Response Nipple
The Natural Response nipple is designed to work with your baby's natural feeding rhythm. Milk is released only when your baby actively compresses the nipple with their tongue and gums, similar to how they would extract milk from the breast.
Image: A baby being fed with a Philips Avent Natural bottle, demonstrating the natural feeding position.
When your baby pauses to swallow and breathe, the milk flow will stop. This allows for a more controlled and comfortable feeding experience, reducing the risk of overfeeding or gulping.
Image: A baby pausing during feeding with a Philips Avent Natural bottle, illustrating that milk flow stops when the baby is not actively drinking.
Combining Breast and Bottle Feeding
The wide, soft, and flexible breast-shaped nipple is designed to mimic the shape and feel of a breast, making it easier for your baby to latch on and transition between breast and bottle feeding.
Image: A split image showing a baby breastfeeding on one side and bottle-feeding with a Philips Avent Natural bottle on the other, highlighting the ease of combining methods.
Nipple Flow Rates
Philips Avent Natural Response nipples are available in various flow rates to match your baby's developmental stage and feeding preferences. This product includes Slow Flow (Flow 2) nipples, suitable for newborns and infants 0-3 months.
Image: A close-up of the Philips Avent Natural Response Nipple, indicating 'Flow 2 Slow' with five drops, two of which are filled.
Choosing the correct flow rate is important. While age is a general guide, observe your baby's feeding cues:
- Try a lower flow: If milk is leaking from your baby's mouth or your baby is gulping.
- Start with the nipple that comes with the bottle: This is typically appropriate for the indicated age range.
- Try a higher flow: If your baby is playing with the nipple instead of drinking or seems frustrated.
Image: A chart illustrating the different Philips Avent Natural Response Nipple flow rates (1-5) from Extra Slow to Extra Fast, with corresponding visual indicators.
Cleaning and Maintenance
Cleaning
For hygiene, disassemble all parts immediately after each use and clean them thoroughly. The Philips Avent Natural Baby Bottles are dishwasher safe (top rack only). For hand washing, use warm soapy water and a soft brush to clean all components. Ensure all milk residue is removed, especially from the nipple and anti-colic valve.
Sterilization
Sterilize all cleaned components before each use for babies up to 12 months old. You can sterilize using one of the following methods:
- Boiling: Place disassembled parts in boiling water for 5 minutes. Ensure there is enough water to prevent parts from touching the bottom or sides of the pot.
- Steam Sterilizer: Use a Philips Avent steam sterilizer or another suitable sterilizer according to its instructions.
- Microwave Sterilizer: Use a microwave sterilizer according to its instructions.
Always allow parts to cool before handling and ensure they are dry before storage.
Troubleshooting
- Baby not taking the bottle: It is natural for a baby to take 2-3 tries to get milk flowing from a new bottle. Be patient and try different feeding positions. Ensure the nipple flow rate is appropriate for your baby's age and feeding style.
- Colic or discomfort: The integrated anti-colic valve is designed to reduce colic by venting air away from your baby's tummy. Ensure the valve is clean and properly assembled. If discomfort persists, consult a healthcare professional.
- Milk leakage: The no-drip nipple design helps prevent lost milk. Ensure the nipple is correctly inserted into the screw ring and the screw ring is tightened securely onto the bottle. Check for any damage to the nipple or bottle components.
Image: A baby sitting next to a Philips Avent Natural bottle, illustrating the no-drip nipple design that prevents milk loss.
Product Specifications
| Product Dimensions | 5.91 x 3.94 x 1.97 inches |
| Item Model Number | SCY900/04 |
| Material Composition | 80% plastic, 20% silicone |
| Material Free | BPA Free |
| Number Of Items | 1 (pack of 4 bottles) |
| Style | Natural |
| Dishwasher Safe | Yes |
| Bottle Nipple Type | Vented (Natural Response) |
| Item Weight | 3.53 ounces (100 Grams) |
Important Safety Information
- Always use this product with adult supervision.
- Never use feeding nipples as a soother.
- Continuous and prolonged sucking of fluids will cause tooth decay.
- Always check food temperature before feeding.
- Keep all components not in use out of reach of children.
- Inspect before each use and pull the feeding nipple in all directions. Throw away at the first signs of damage or weakness.
- Do not leave a feeding nipple in direct sunlight or heat, or leave in disinfectant (sterilizing solution) for longer than recommended, as this may weaken the nipple.
- All components are BPA-free.
Warranty and Support
For warranty information or product support, please refer to the documentation included with your purchase or visit the official Philips Avent website. Contact customer service for assistance with any product-related inquiries.