Introduction
The Revolo RE001 Electronic Keypad Deadbolt offers advanced security and convenience for your home. This keyless entry system provides multiple access options, including keypad codes and traditional keys, ensuring flexible and secure entry. Its robust design and smart features make it an ideal solution for modern households.
Key features include:
- Keyless Entry: Supports up to 20 access codes for family members and temporary codes for guests.
- Auto-Locking: Customizable auto-lock delay (10-99 seconds) or one-touch locking for enhanced security.
- Anti-Peeking Password: Allows entry of random digits before or after your code to prevent code exposure.
- Durable Construction: Made from sturdy zinc alloy with an IP65 weather-resistant rating.
Figure 1: Revolo RE001 Electronic Keypad Deadbolt and Handle Set.
Setup and Installation
The Revolo RE001 is designed for easy installation with minimal tools. A Phillips head screwdriver is typically all that is required. Ensure your door meets the standard preparation requirements before beginning installation.
Pre-Installation Checks
- Verify door thickness (1-3/8" to 2" / 35mm to 50mm).
- Confirm door hole diameter (2-1/8" / 54mm).
- Check backset (2-3/8" or 2-3/4" / 60mm or 70mm).
Figure 2: Door dimensions and lock component measurements for compatibility.
Installation Steps
- Adjust the latch length if necessary to fit your door's backset.
- Install the latch into the door edge, ensuring the correct orientation for your door's swing.
- Install the exterior keypad assembly, ensuring the lock cylinder is correctly aligned with the latch.
- Install the mounting plate on the interior side, aligning its screw with the latch screw.
- Connect the IC wire from the exterior assembly to the interior assembly.
- Mount the interior assembly and secure it with screws.
- Insert 4 AA batteries into the interior assembly.
- Attach the battery cover.
Figure 3: Handleset installation overview.
For a detailed visual guide, refer to the official installation manual PDF provided with your product or the installation video below.
Video 1: Revolo Deadbolt Door Lock Installation Guide. This video provides a comprehensive overview of the installation process for the Revolo keypad deadbolt.
Operating Instructions
The Revolo RE001 offers various modes and programming options for personalized security.
Programming Master and User Codes
The lock comes with a default master code. It is highly recommended to change this immediately after installation.
Video 2: RE001 Programming Instruction. This video demonstrates how to change the master code, add user codes, delete user codes, enable vacation mode, and adjust auto-lock settings.
Changing Master Code
Follow the steps in Video 2 (0:03-0:24) to change the default master code to a new, secure code.
Adding User Codes
You can add up to 20 unique user codes for family members or frequent visitors. Refer to Video 2 (0:25-0:46) for instructions.
Figure 4: User code assignment for family, friends, and service providers.
Deleting User Codes
To remove an existing user code, follow the procedure shown in Video 2 (0:47-1:02).
One-Time Codes
Generate temporary codes that automatically delete after a single use, ideal for one-time guests or deliveries. See Video 2 (1:56-2:15) for details.
Figure 5: One-time code functionality for temporary access.
Locking Features
Auto-Lock Function
The lock can be set to automatically lock after a specified delay (10-99 seconds). This feature ensures your door is always secured. Enable/disable and set delay using Video 2 (1:15-1:41) and (1:42-1:55).
Figure 6: Auto-lock and one-touch locking for convenience and security.
Silent Mode
Enable silent mode to disable keypad beeps for quiet operation. This is useful for not disturbing others. See Video 2 (2:16-2:45) for instructions.
Vacation Mode
Activate vacation mode to temporarily disable all user codes, providing enhanced security when you are away for extended periods. Refer to Video 2 (1:03-1:14) for activation.
Figure 7: Vacation mode for temporary disabling of user codes.
Features and Design
The Revolo RE001 combines aesthetic appeal with robust functionality.
Weather Resistance
With an IP65 rating, the deadbolt is designed to withstand various weather conditions, protecting your home in rain or shine.
Figure 8: IP65 waterproof and temperature resistance features.
Anti-Peeking Password
Enhance your security by entering random digits before or after your actual code. This feature prevents others from guessing your code by observing your finger movements.
Figure 9: Anti-peeking password for enhanced security.
Wrong Code Entry Limit
For added security, the lock will shut down for 3 minutes after 10 invalid entry codes are attempted.
Figure 10: Wrong code entry limit for preventing unauthorized access.
Maintenance
To ensure the longevity and optimal performance of your Revolo RE001 Electronic Keypad Deadbolt, regular maintenance is recommended.
- Battery Replacement: The lock uses 4 AA batteries. Replace them promptly when the low battery alert is indicated to avoid loss of function.
- Cleaning: Wipe the keypad and handle surfaces with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or electronic components.
- Lubrication: Periodically apply a silicone-based lubricant to the deadbolt mechanism to ensure smooth operation. Do not use oil-based lubricants.
- Firmware Updates: Check the Revolo website or app (if applicable) for any available firmware updates to ensure your lock has the latest features and security enhancements.
Troubleshooting
If you encounter issues with your Revolo RE001, refer to the common troubleshooting tips below. For more complex problems, consult the official Troubleshooting Guide PDF.
Common Issues and Solutions
- Lock not responding to keypad: Check battery levels and replace if necessary. Ensure the master code is correctly entered.
- Deadbolt not extending/retracting fully: Verify proper alignment of the lock cylinder and latch during installation. Ensure no obstructions in the door frame.
- Keypad lights not illuminating: This may indicate low battery. Replace batteries.
- Lock cycles back and forth but doesn't change direction: This could be a hardware issue related to the bolt mechanism. Refer to the troubleshooting guide for detailed steps on resetting the lock direction.
For a comprehensive list of troubleshooting steps and solutions, please download the official Troubleshooting Guide (PDF).
Specifications
| Feature | Detail |
|---|---|
| Brand | Revolo |
| Model Name | RE001 keypad door lock with handle |
| Lock Type | Keypad |
| Material | Metal (Zinc Alloy) |
| Color | Stain Nickel |
| Item Dimensions (L x W x H) | 12.6 x 8.27 x 3.54 inches |
| Item Weight | 4.87 Pounds |
| Power Source | 4 AA Batteries (not included) |
| Special Features | Keyless Entry, Keypad Lock with Handle, Auto-Lock, One-time PIN Code |
| Weather Resistance | IP65 Rated |
Warranty and Support
Revolo is committed to providing high-quality products and excellent customer service.
Product Warranty
The Revolo RE001 Electronic Keypad Deadbolt comes with a lifetime mechanical warranty and a 12-month electronics warranty.
Customer Support
For any questions, technical assistance, or warranty claims, please contact Revolo customer service:
- Phone Support: Monday to Friday, 9 AM to 5 PM PST
- Email Support: 24/7 after-sales email service
Additional resources, including the full user manual and installation guide, are available for download:
