Yaheetech PU Leather Barrel Chair Instruction Manual

1. Introduction

Thank you for choosing the Yaheetech PU Leather Barrel Chair. This manual provides essential information for the safe assembly, proper use, and maintenance of your new chair. Please read these instructions carefully before assembly and retain them for future reference.

2. Package Contents

Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact Yaheetech customer support.

• 1 x Barrel Chair Body
• 4 x Wooden Legs
• 1 x User Manual (this document)

3. Setup and Assembly

Assembly of your Yaheetech Barrel Chair is quick and straightforward, typically taking less than 5 minutes. No tools are required.

1. Unpack Components: Carefully remove all parts from the packaging and place them on a soft, clean surface to prevent scratches.
2. Attach Legs: Locate the four wooden legs. Align each leg with the pre-drilled holes on the underside of the chair body. Screw the legs into place by hand until they are firmly secured. Do not overtighten.
3. Adjust Foot Pads: The chair features adjustable foot pads. If the chair wobbles on an uneven floor, gently twist the foot pads at the bottom of each leg until the chair is stable. This also helps protect your floors from scratches.

Figure 3.1: Attaching the wooden legs to the chair body.

Figure 3.2: Adjusting the foot pads for stability.

4. Operating and Usage

The Yaheetech Barrel Chair is designed for comfortable seating in various indoor environments.

• Comfort Features: The chair features a U-shaped backrest and sloping armrests for ergonomic support. The deep, foam-padded seat cushion provides comfort.
• Detachable Cushion: The seat cushion is attached with hook-and-loop fasteners, allowing for easy removal for cleaning or adjustment.
• Placement: This compact accent chair is suitable for living rooms, bedrooms, guest rooms, and other small spaces like apartments or studios.

Figure 4.1: Key features of the Yaheetech Barrel Chair.

Figure 4.2: Illustration of the 4-inch thick, high-density foam cushion.

5. Maintenance

Proper care will extend the life and appearance of your chair.

• Cleaning: The chair is covered with quality faux leather, which is water-resistant. For spills or soiled areas, simply spot clean with a damp cloth. Avoid using harsh chemicals or abrasive cleaners.
• General Care: Wipe clean regularly to remove dust and dirt.

Figure 5.1: Characteristics of the premium PVC leather for easy maintenance.

6. Troubleshooting

If you encounter any issues with your Yaheetech Barrel Chair, please refer to the following common solutions:

• Wobbling Chair: Ensure all four legs are screwed in tightly. Adjust the foot pads on the bottom of each leg to compensate for uneven floor surfaces.
• Loose Cushion: Verify that the hook-and-loop fasteners on the underside of the cushion are properly aligned and secured to the chair body.
• General Concerns: For any other issues not covered here, please contact Yaheetech customer support for assistance.

7. Specifications

Detailed specifications for the Yaheetech PU Leather Barrel Chair:

Figure 7.1: Product dimensions.

8. Warranty and Support

For warranty information or customer support, please contact Yaheetech directly through their official website or the retailer where the product was purchased. Please have your model number (760072851916) and purchase details ready.

An additional installation manual in PDF format is available for download: Installation Manual (PDF)