JBL Wireless Two Microphone System

Introduction

The JBL Wireless Two Microphone System delivers JBL Original Pro Sound with incredible vocal clarity and detail. Designed for ease of use, this system allows you to achieve high-quality audio without distortion or delay. Simply plug the wireless dual-channel receiver into your compatible speaker, turn on the microphones, and you’re ready to perform or present.

Image: The JBL Wireless Two Microphone System, showcasing both microphones and the compact receiver.

What's Included

• 2x Wireless Microphones
• 1x Wireless Receiver
• 1x USB-C Cable
• Quick Start Guide (QSG)
• Safety Sheet
• Warranty Card

Key Features

• High Vocal Quality & JBL Original Pro Sound: Experience crystal clear clarity without distortion or delay, ensuring your voice sounds on point.
• Rechargeable Dual Channel UHF Wireless Receiver: Connect two wireless microphones simultaneously, with both voices mixed seamlessly through your speaker for up to 6 hours of playback.
• Plug and Play Setup: Enjoy super simple setup; just turn on the receiver and wireless microphones, and you're ready to go instantly.
• Replaceable AA Batteries: Microphones come with easy-to-replace AA batteries, allowing for extended use.

Setup Guide

1. Charging the Receiver

The dual-channel receiver is rechargeable via the included USB-C cable. Connect the USB-C cable to the receiver and a power source (e.g., USB wall adapter, computer USB port) to charge.

Image: Close-up of the JBL Wireless Receiver, highlighting its USB-C charging port.

2. Connecting the Receiver

Plug the wireless dual-channel receiver into your compatible speaker's 1/4'' (6.3 mm) unbalanced audio input. Ensure it is securely inserted.

Image: The JBL Wireless Receiver connected to the input of a JBL PartyBox speaker.

Operating the Microphones

1. Powering On/Off

Simply turn on each microphone using its dedicated power button. The integrated digital display will illuminate, showing the current channel and battery level.

Image: A single JBL Wireless Microphone with its digital display showing channel information.

2. Using Both Microphones

The dual-channel receiver is designed to work with both microphones simultaneously. Once both microphones are powered on and the receiver is connected, their audio will be mixed and output through your speaker.

3. Battery Replacement

The microphones are powered by easy-to-replace AA batteries. To replace them, gently unscrew the bottom shaft of the microphone to reveal the battery compartment. Insert new AA batteries, ensuring correct polarity, then re-screw the shaft securely.

Image: A JBL Wireless Microphone with its lower section detached, revealing the battery compartment.

Care and Maintenance

To ensure the longevity and optimal performance of your JBL Wireless Microphone System, follow these guidelines:

• Keep the microphones and receiver dry. Avoid exposure to water or excessive humidity.
• Clean the microphones with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Store the system in a cool, dry place when not in use.
• Ensure the receiver is fully charged before each use for optimal performance.
• Replace AA batteries in the microphones as needed to maintain consistent power.

Troubleshooting

Technical Specifications

Warranty and Support

This product comes with a manufacturer's warranty. Please refer to the included Warranty Card and Safety Sheet for detailed information regarding warranty coverage, terms, and conditions.

For technical support or service inquiries, please visit the official JBL website or contact their customer service department. Keep your purchase receipt for warranty claims.

Official JBL Store: JBL Professional Store on Amazon