Roborock S7 Robot Vacuum and Mop Combo User Manual

1. Introduction

The Roborock S7 is an advanced robot vacuum and mop combo designed to provide efficient and thorough cleaning for your home. It combines powerful vacuuming with innovative sonic mopping technology to tackle various floor types and stains. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Roborock S7.

Image: The Roborock S7 robot vacuum and mop combo, shown with its accompanying mobile app interface.

Key Features:

• Sonic Mopping Technology: Scrubs floors up to 3,000 times per minute for deep cleaning.
• Intelligent Mop Lifting: Automatically lifts the mop when a carpet is detected, allowing seamless transition between hard floors and carpets.
• Upgraded Brush System: Features a multi-directional floating rubber brush designed to resist hair tangling, ideal for pet owners.
• Powerful Performance: Delivers 2500PA HyperForce suction and 580g mop pressure for effective dirt and stain removal.
• Ultrasonic Carpet Recognition: Accurately identifies carpets to boost suction power or lift the mop as needed.
• Accurate Cleaning with LiDAR Navigation: Creates precise maps and uses adaptive route algorithms for efficient cleaning paths.
• Comprehensive App Control: Manage cleaning schedules, adjust settings, define No-Go Zones, and track cleaning routes via the Roborock App.
• Voice Control: Compatible with Amazon Alexa, Google Home, and Siri Shortcuts for convenient hands-free operation.
• Long Battery Life: Equipped with a 5200mAh Lithium polymer battery, providing up to 180 minutes of continuous cleaning.

2. Setup

2.1 Unboxing and Initial Placement

Carefully remove all components from the packaging. Place the charging dock against a wall on a hard, level surface, ensuring there is adequate space around it (at least 0.5m on both sides and 1.5m in front). Connect the power cable to the charging dock and plug it into a power outlet.

Image: The Roborock S7 robot vacuum positioned near its charging dock, illustrating proper placement for optimal operation.

2.2 Charging the Robot

Place the Roborock S7 onto the charging dock. The power indicator light on the robot will illuminate to show it is charging. For first-time use, ensure the robot is fully charged before starting a cleaning cycle. A full charge typically takes approximately 6 hours.

2.3 App Installation and Connection

Download the Roborock App from the App Store (iOS) or Google Play Store (Android). Open the app and follow the on-screen instructions to create an account and add your Roborock S7. This typically involves connecting the robot to your home Wi-Fi network. The app provides comprehensive control and mapping features.

Image: A smartphone displaying the Roborock app interface, showing cleaning routes, battery level, and control options for the robot vacuum.

3. Operating Instructions

3.1 Starting a Cleaning Cycle

Press the Power button on the robot or use the Roborock App to start a cleaning cycle. The robot will automatically map your home using LiDAR navigation and clean systematically. You can choose between different cleaning modes (Vacuum, Mop, or Vacuum & Mop) via the app.

3.2 Sonic Mopping Technology

The Roborock S7 utilizes sonic vibration technology to scrub floors, effectively removing dried-on stains. Ensure the water tank is filled and the mop cloth is attached for mopping functions.

Image: The Roborock S7 robot vacuum actively mopping a hard floor, demonstrating its sonic mopping technology with visible vibration patterns on the surface.

3.3 Intelligent Mop Lifting

The S7's VibraRise mop module automatically lifts when it detects carpet, preventing wet carpets during mopping. This feature allows for simultaneous vacuuming of carpets and mopping of hard floors in a single cleaning session.

Image: Two views of the Roborock S7, illustrating the mop lifting mechanism: one showing the mop lowered for hard floors, and the other showing it raised for carpet transitions.

3.4 Accurate Cleaning and Mapping

The S7 uses LiDAR navigation to create precise maps of your home, allowing it to plan the most efficient cleaning routes. You can view these maps in the app and set custom cleaning zones, no-go zones, and invisible walls.

Image: The Roborock S7 robot vacuum navigating a living room, with visual overlays indicating its LiDAR mapping and cleaning path.

3.5 Voice Control

Integrate your Roborock S7 with Amazon Alexa, Google Home, or Siri Shortcuts for convenient voice commands. Simply say "Alexa, ask Roborock to clean" or "Hey Google, tell Roborock to recharge" to control your robot.

Image: The Roborock S7 robot vacuum on a carpet, with speech bubbles indicating voice commands for Amazon Alexa and Google Home integration.

4. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your Roborock S7.

4.1 Emptying the Dustbin

The dustbin should be emptied after each cleaning cycle, especially if you have pets or clean frequently. Open the top cover of the robot, remove the dustbin, and empty its contents into a trash can. The dustbin is washable; rinse it with water and allow it to air dry completely before reinserting.

4.2 Refilling the Water Tank and Cleaning Mop Cloth

For mopping, ensure the 300ml electronic water tank is filled with clean water. The mop cloth should be removed and cleaned after each mopping session. It can be hand-washed or machine-washed. Allow it to dry completely before reattaching.

4.3 Cleaning the Main Brush and Side Brush

The all-new rubber main brush is designed to resist hair tangling, but occasional cleaning is still recommended. Remove the main brush and use the cleaning tool provided to cut and remove any tangled hair. Check and clean the side brush for debris as well.

Image: Close-up views of the Roborock S7's underside, highlighting the upgraded rubber brush system designed to resist hair tangling and its multi-directional floating capability.

4.4 Cleaning Sensors and Charging Contacts

Wipe the cliff sensors, wall sensors, and charging contacts on both the robot and the charging dock with a soft, dry cloth. Keeping these clean ensures proper navigation and charging.

5. Troubleshooting

If you encounter issues with your Roborock S7, refer to the following common problems and solutions. For more detailed troubleshooting, consult the full user manual PDF linked in the Warranty and Support section.

6. Specifications

7. Warranty and Support

For warranty information, please refer to the documentation included with your product or visit the official Roborock website. Keep your proof of purchase for warranty claims.

For further assistance, detailed instructions, or advanced features, please refer to the official User Manual PDF:

Download User Manual (PDF)

You can also visit the official Roborock store on Amazon for product information and support:

Visit Roborock Store