Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Hiseeu 16-Channel Wireless Network Video Recorder (NVR) Model CS-1202000. Please read this manual thoroughly before using the product to ensure proper functionality and safety.
Safety Information
- Ensure the NVR is powered by a 12V2A or 12V3A output power supply.
- Do not expose the device to water or moisture.
- Avoid placing the device in direct sunlight or near heat sources.
- Handle the hard drive with care during installation to prevent damage.
- Keep the device away from strong magnetic fields.
Package Contents
The standard package for your Hiseeu 16-Channel Wireless NVR includes the following items:
- Hiseeu 16-Channel Wireless NVR (Hard Drive and Cameras not included)
- Power Supply
- HDMI Cable
- Network Cable
- Wired Mouse
- Screws for Hard Drive Installation
Product Overview
The Hiseeu 16-Channel Wireless NVR supports recording at 1080P/2MP, 3MP, and 5MP resolutions. It features a built-in Wi-Fi router, allowing it to receive and record all cameras using its own bandwidth, minimizing impact on your home network. An internet connection is only required for remote viewing.
Setup
Hard Drive Installation
To save recordings, an internal 2.5'' or 3.5'' hard drive (up to 6TB capacity) must be installed. Follow the steps in the video below for proper installation.
Video 1: Detailed guide on how to install a hard drive into the Hiseeu NVR unit.
Connecting Cameras
New cameras are not pre-paired with your NVR. Follow these steps to add new cameras to your system:
- Right-click your NVR mouse.
- Choose "camera" then select the "+" icon.
- Press the camera reset button for approximately 10 seconds.
- Click "Continue" on the NVR interface.
- Wait for a new IP address to appear, then click "Continue". If no IP address appears, click "Search again".
For a visual guide, refer to the video below:
Video 2: Instructions on how to connect a new camera to your Hiseeu NVR system.
Connecting a WiFi Repeater
If you need to extend the wireless range for your cameras, you can connect a WiFi repeater. The following video demonstrates the process:
Video 3: Guide on connecting a WiFi repeater to enhance the wireless signal for your security cameras.
Operation
NVR Interface Navigation
Navigate the NVR interface using the provided wired mouse. Right-clicking the mouse will typically bring up the main menu options.
PTZ Functionality
If your extended camera supports Pan-Tilt-Zoom (PTZ) functionality, you can control these movements directly through the NVR's mouse interface. This allows for dynamic adjustment of camera views.
Remote Viewing
For remote viewing of your camera feeds from other locations, an internet connection is required. The NVR supports 2.4G/5G WiFi when connected to a network. Utilize the mobile application for two-way audio functionality, ensuring your camera also supports this feature.
Maintenance
Password Reset
If you need to reset your NVR password, follow the instructions in the video below. Ensure you set a new, strong password for security.
Video 4: Step-by-step guide on how to reset the NVR password.
Hard Drive Management
The NVR supports hard drives up to 6TB for continuous recording. Regularly check the hard drive status and ensure sufficient storage space. Formatting the hard drive may be necessary during initial setup or if issues arise.
Troubleshooting
- No Video Signal: Check all power connections to the NVR and cameras. Ensure cameras are properly paired (refer to "Connecting Cameras" section). Verify HDMI/VGA cable connection to the display.
- NVR Not Powering On: Confirm the power adapter is correctly connected and providing the specified voltage (12V2A or 12V3A).
- Cannot Access NVR: If you forgot your password, refer to the "Password Reset" video. Ensure your network connection is stable for remote access.
- Poor Wireless Signal: Consider using a WiFi repeater (refer to "Connecting a WiFi Repeater" video) or repositioning cameras/NVR to improve signal strength.
- No Audio Output: Ensure an HDMI cable is used to connect to an HD TV. Verify that the connected camera supports audio functionality.
Specifications
| Feature | Detail |
|---|---|
| Model Number | CS-1202000 |
| Channels | 16 Channels |
| Recording Resolution | 1080P/2MP, 3MP, 5MP |
| Hard Drive Support | Up to 6TB (2.5'' or 3.5'' internal HDD, not included) |
| Connectivity Technology | HDMI, Dual WiFi (2.4G/5G) |
| Compatible Devices | Hiseeu Wireless Cameras |
| Manufacturer | Hiseeu |
| Item Weight | 2.46 pounds |
| Package Dimensions | 13.7 x 11.77 x 3.11 inches |
Warranty and Support
Hiseeu offers lifetime support for its products, including email, phone call, and online chat assistance. For specific warranty details and to access support, please refer to the official Hiseeu website or the contact information provided in your product packaging.
