Introduction
Thank you for choosing the AIKE Air Wiper Compact Hand Dryer, Model AK2630. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new hand dryer. Please read this manual thoroughly before use and retain it for future reference.
Figure 1: AIKE Air Wiper Compact Hand Dryer in operation.
Setup and Installation
The AIKE AK2630 hand dryer is designed for straightforward installation. It comes with a 60-inch (1.5m) power cord, allowing for simple plug-in operation. The unit is not designed for direct hardwiring, and the cord cannot be removed.
Installation Steps:
- Prepare the Unit: Before mounting, remove the safety screw and the mounting plate from the back of the hand dryer.
- Mount the Plate: Securely drill and install the mounting plate onto the desired wall surface using appropriate fasteners. Ensure the plate is level and firmly attached.
- Hang the Dryer: Carefully hang the hand dryer unit onto the installed mounting plate, ensuring it clicks securely into place.
- Reinstall Safety Screw: Reinstall the safety screw to firmly secure the hand dryer to the mounting plate.
- Connect Power: Plug the 60-inch power cord into a standard 100V-130V electrical outlet.
- Activate Heating (Optional): Locate the heating switch (often a red switch) on the underside of the unit. Turn it on for smart warm air functionality. If the ambient temperature is below 77°F, the unit will blow warm air; above 77°F, it will blow normal air.
Figure 2: Removing the mounting plate for installation.
Figure 3: Installed hand dryer in a restroom environment.
Installation and Usage Guide Video:
Video 1: Official AIKE AK2630S Hand Dryer Installation & Using Guide. This video demonstrates the complete installation process and basic operation.
Operating Instructions
The AIKE AK2630 hand dryer features automatic, sensor-based operation for hygienic use.
Usage:
- Activate: Place your hands within the sensing distance of 110-130mm directly under the air outlet. The dryer will automatically activate.
- Drying: Move your hands gently back and forth under the air stream. The powerful airflow ensures fast drying within 10-15 seconds.
- Deactivate: Remove your hands from the sensing area, and the dryer will automatically turn off.
Figure 4: Key operational features: fast drying and smart warm air.
Maintenance
Regular maintenance ensures optimal performance and longevity of your hand dryer.
- Exterior Cleaning: Wipe the exterior surface with a soft, damp cloth and mild detergent. Avoid abrasive cleaners or solvents that could damage the ABS polycarbonate construction.
- Filter Maintenance: Periodically check and clean the air filter located at the bottom of the unit. Gently slide out the filter cover and remove the filter. Clean it with a soft brush or vacuum cleaner to remove dust and debris. Reinsert the clean filter and close the cover.
- Sensor Cleaning: Ensure the sensor area is free from dust or obstructions for proper automatic activation.
Troubleshooting
If you encounter any issues with your AIKE hand dryer, please refer to the following common solutions:
- No Power: Check if the power cord is securely plugged into a working outlet. Verify the outlet has power by testing it with another device.
- Not Activating: Ensure your hands are within the specified sensing distance (110-130mm) and that the sensor is clean and unobstructed.
- Weak Airflow: Check if the air filter is clean and not clogged with dust. A dirty filter can restrict airflow.
- Overheating/Automatic Shut-off: The unit has automatic heating and overload protection. If it shuts off unexpectedly, allow it to cool down before attempting to use it again. Ensure proper ventilation around the unit.
For persistent issues or problems not listed here, please contact AIKE customer support.
Specifications
Detailed technical specifications for the AIKE Air Wiper Compact Hand Dryer Model AK2630S:
Figure 5: Product dimensions and parameters for Model AK2630S.
| Parameter | Value |
|---|---|
| Model | AK2630S |
| Voltage | 100V-130V |
| Input Power | 1400W-1650W |
| Frequency | 50/60Hz |
| Air Volume | 100.8m³/h |
| Noise Level | 67dB |
| Sensing Distance | 110-130mm |
| Power Cord Length | 60 inches (1.5m) |
| Material | ABS Polycarbonate |
| Item Weight | 8.03 pounds |
| Product Dimensions (H x W x D) | 9.84 x 6.5 x 9.25 inches |
| Key Features | Automatic heating, over time & overload protection |
Warranty and Support
AIKE is committed to the quality of its products. If you require any assistance or have questions regarding your hand dryer, please do not hesitate to contact AIKE Direct customer support. Contact information can typically be found on the product packaging or the official AIKE website.
For additional resources, you may also refer to the official User Manual PDF available online: AIKE User Manual (PDF)
