Fastrack Mean Machines Analog-Digital Watch Model 38054PM01 User Manual

1. Introduction

This manual provides comprehensive instructions for the operation and maintenance of your Fastrack Mean Machines Analog-Digital Watch, Model NN38054PM01. This timepiece combines traditional analog display with modern digital functionalities, offering versatility and precision. It features 5 ATM / 50 m water resistance, a durable metal strap, and a stainless steel back cover, powered by high-precision quartz and digital movements.

2. Product Overview

The Fastrack Mean Machines watch is designed for durability and functionality. It features a robust stainless steel case and band, an analog display for quick time reference, and a digital display for additional features like date, alarm, and stopwatch. The watch is equipped with multiple buttons for mode selection and setting adjustments.

Figure 2.1: Front view of the Fastrack Mean Machines Analog-Digital Watch. This image displays the watch face with both analog hands and the digital display, highlighting the white dial and silver-tone casing.

Figure 2.2: Side view of the Fastrack Mean Machines Analog-Digital Watch. This image shows the watch's profile, including the crown and function buttons on the side of the case.

Figure 2.3: Back view of the Fastrack Mean Machines Analog-Digital Watch. This image displays the stainless steel back cover, engraved with the Fastrack logo, model number, and water resistance rating.

3. Setup

3.1 Setting Analog Time

1. Pull the crown (the small knob on the right side of the watch case) out to the first position.
2. Rotate the crown clockwise or counter-clockwise to adjust the hour and minute hands to the desired time.
3. Once the correct time is set, push the crown back into its normal position to start the analog movement.

3.2 Setting Digital Time and Date

The digital display typically has multiple modes (Time, Alarm, Stopwatch). Refer to the button labels on your watch for specific functions (e.g., MODE, SET, START/STOP, LIGHT).

1. Press the MODE button repeatedly until the digital time display starts flashing, indicating it is in setting mode.
2. Use the SET or START/STOP button to adjust the flashing digit (hours, minutes, seconds).
3. Press the MODE button again to cycle through the settings (e.g., hours, minutes, 12/24-hour format, year, month, day).
4. After setting all parameters, press the MODE button one last time to exit the setting mode.

4. Operating Instructions

4.1 Digital Display Modes

Press the MODE button to cycle through the following digital display modes:

• Time Mode: Displays current digital time (hours, minutes, seconds) and date.
• Alarm Mode: Allows setting and activating an alarm.
• Stopwatch Mode: Used for measuring elapsed time.

4.2 Using the Stopwatch

1. Navigate to the Stopwatch Mode by pressing the MODE button.
2. Press the START/STOP button to begin timing.
3. Press START/STOP again to pause the timing.
4. To resume, press START/STOP.
5. To reset the stopwatch to zero, press the RESET button (often the same as SET or a dedicated button) while the stopwatch is paused.

4.3 Using the Alarm

1. Navigate to the Alarm Mode by pressing the MODE button.
2. Press the SET button to enter alarm setting mode. The alarm hour will flash.
3. Use the START/STOP button to adjust the hour.
4. Press SET again to move to the minute setting, and adjust with START/STOP.
5. Press MODE to exit alarm setting.
6. To activate/deactivate the alarm, typically press START/STOP while in Alarm Mode (not setting mode). An alarm icon will appear when active.

4.4 Backlight Function

Press the LIGHT button (usually located on the top left or bottom left of the watch case) to illuminate the digital display for a few seconds in low-light conditions.

5. Maintenance

5.1 Cleaning Your Watch

• Wipe the watch case and metal strap with a soft, dry cloth regularly to remove dust and dirt.
• For stubborn dirt, use a slightly damp cloth with mild soap, then wipe dry immediately. Avoid harsh chemicals or abrasive cleaners.
• Ensure the crown is pushed in completely before cleaning to maintain water resistance.

5.2 Water Resistance

Your Fastrack watch is rated for 5 ATM / 50 meters water resistance. This means it is suitable for everyday use, including showering and swimming in shallow water. However, it is not suitable for diving or high-impact water sports. Do not operate the crown or buttons while the watch is wet or submerged, as this can compromise the water seal.

5.3 Battery Replacement

When the watch battery runs low (indicated by dimming digital display or analog hands stopping), it is recommended to have it replaced by an authorized Fastrack service center or a qualified watch technician. Attempting to replace the battery yourself may void the warranty and compromise water resistance.

6. Troubleshooting

7. Specifications

8. Warranty and Support

8.1 Manufacturer's Warranty

This Fastrack watch is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration. The warranty typically covers manufacturing defects but does not cover damage resulting from misuse, accidents, unauthorized repairs, or normal wear and tear.

8.2 Customer Support

For any questions, service requests, or warranty claims, please contact Fastrack customer support or visit an authorized Fastrack service center. Contact information can usually be found on the Fastrack official website or on your warranty documentation.

You can find more information and support on the official Fastrack Store on Amazon.