Introduction
The Scangrip Work Pen 200 R is a versatile and durable rechargeable LED penlight designed for professional inspection work. Its slim and compact design allows access to confined spaces, while its powerful illumination and stepless dimmer function provide optimal lighting for various tasks. Built-in magnets offer flexible mounting options, and the USB rechargeable battery ensures convenience and long operating times.
Figure 1: The Scangrip Work Pen 200 R, a rechargeable LED penlight.
Product Features
- Powerful Illumination: Features both a lamp head (up to 200 lumen) and a precision top light (150 lumen) for diverse lighting needs.
- Stepless Dimmer Function: Adjust light output from 10% to 100% to suit specific job requirements.
- Built-in Magnets: Integrated magnets in the clip and at the bottom provide versatile suspension and storage options.
- Slim and Compact Design: Allows easy access to inaccessible places.
- USB Rechargeable: Conveniently recharges via USB cable, eliminating the need for frequent battery replacements.
- Durable Construction: Made with a durable aluminum body for a comfortable grip and long-lasting use.
Figure 2: Key features and components of the Work Pen 200 R.
Setup
Initial Charging
Before first use, fully charge the Work Pen 200 R. Connect the supplied USB cable to the penlight's charging port and to a compatible USB power source. The charging indicator light will show the charging status. A full charge typically takes 2.5 hours.
Figure 3: The penlight in use, demonstrating its illumination capability.
Attaching the Penlight
The Work Pen 200 R features a built-in pocket clip for easy carrying and secure attachment to clothing. Additionally, integrated magnets allow for hands-free operation by attaching the penlight to metallic surfaces.
Figure 4: The penlight conveniently clipped to a pocket for portability.
Operating Instructions
Power On/Off and Mode Selection
To turn the penlight on or off, use the side switch. The penlight features two light sources: a main lamp head and a precision top light. Press the side switch repeatedly to cycle through the lighting modes:
- Press once for the main lamp head (up to 200 lumen).
- Press twice for the precision top light (150 lumen).
- Press a third time to turn the penlight off.
Dimmer Function
The Work Pen 200 R includes a stepless dimmer function. While the main lamp head is on, press and hold the side switch to adjust the brightness from 10% to 100%. Release the switch at the desired brightness level. The penlight will remember the last used brightness setting for the main lamp head.
Video 1: Official product video demonstrating the features and operation of the Scangrip Work Pen 200 R, including its slim design, durable aluminum construction, precision top light, main lamp head, stepless dimmer function, built-in magnets, pocket clip, and USB charging.
Maintenance
Cleaning
To clean the penlight, wipe it with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the surface or internal components. Ensure the charging port is free of dust and debris.
Battery Care
The Work Pen 200 R uses a Lithium-Ion battery. For optimal battery life, avoid completely draining the battery before recharging. Store the penlight in a cool, dry place when not in use for extended periods. Recharge the battery at least once every three months to maintain its health.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Penlight does not turn on. | Battery is depleted. | Recharge the penlight using the supplied USB cable. |
| Light output is dim. | Battery is low or dimmer is set to a low level. | Recharge the battery. Adjust the dimmer by pressing and holding the side switch. |
| Penlight does not charge. | USB cable or power source issue; charging port obstructed. | Ensure USB cable is properly connected and power source is functional. Clean the charging port. Try a different USB cable or power source. |
| Magnets do not hold securely. | Surface is not ferromagnetic or too thin. | Ensure the surface is made of a suitable magnetic material and is thick enough to provide sufficient magnetic attraction. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 815127 |
| Light Source Type | LED (COB LED / Spot LED) |
| Brightness (Main Lamp) | 20-200 Lumen (dimmable) |
| Brightness (Top Light) | 150 Lumen |
| Operating Time | 1-10 hours (Main Lamp), 1 hour (Top Light) |
| Battery Type | 3.7V / 750 mAh Lithium-Ion |
| Charging Time | 2.5 hours |
| Material | Aluminum |
| Weight | 0.05 kg (1.76 ounces) |
| Temperature Range | -10° to +40°C |
| Water Resistance Level | Not Water Resistant |
| Recommended Uses | Close-up inspection in various industrial and household applications. |
Warranty and Support
Scangrip offers a 3-year warranty for the Work Pen 200 R. To register your product and activate the warranty, please visit the official Scangrip website: www.scangrip.com.
For technical support, troubleshooting assistance, or spare parts, please contact Scangrip customer service through their website or authorized distributors.
