Redragon 700W 80+ Bronze Full Modular Power Supply User Manual

1. Introduction

Thank you for choosing the Redragon 700W 80+ Bronze Full Modular Power Supply. This power supply unit (PSU) is designed to provide stable and efficient power to your computer system. Featuring 80 PLUS Bronze certification for energy efficiency, a 14cm hydraulic bearing fan for quiet operation, Active PFC, and high-quality Japanese main capacitors, this PSU ensures reliable performance and protection for your components. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to help you get the most out of your new power supply.

2. Safety Information

Please read all safety warnings and instructions carefully before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or damage to the product or connected devices.

• Always disconnect the AC power cord from the wall outlet before installing, removing, or servicing the power supply.
• This power supply is designed for use in personal computers only. Do not use it for any other purpose.
• Do not open the power supply casing. High voltages are present inside, and opening the unit will void the warranty.
• Ensure proper grounding.
• Avoid exposing the power supply to moisture or extreme temperatures.
• Install the power supply in a well-ventilated area to prevent overheating.

3. Package Contents

Verify that all items are present in your package:

• Redragon 700W 80+ Bronze Full Modular Power Supply Unit
• Modular Cable Set (24-pin ATX, 8-pin EPS/CPU, PCI-E, SATA, Molex)
• AC Power Cord (may vary by region)
• Mounting Screws
• User Manual (this document)

4. Product Overview

Familiarize yourself with the various parts of your Redragon Power Supply.

Figure 4.1: Top-front view of the Redragon 700W Power Supply, showing the fan grille and main chassis.

Figure 4.2: Rear view of the Redragon 700W Power Supply, featuring the AC power inlet, power switch, and exhaust grille.

Figure 4.3: Side view of the Redragon 700W Power Supply, highlighting the full modular cable connections for various components.

Key Components:

• 140mm Hydraulic Bearing Fan: Provides efficient cooling while maintaining low noise levels.
• Modular Cable Connectors: Allows for flexible cable management by connecting only the necessary cables.
• AC Power Inlet: Connects the power supply to the wall outlet via the AC power cord.
• Power ON/OFF Switch: Controls the main power to the unit.
• Ventilation Grilles: Ensures proper airflow for heat dissipation.

5. Setup & Installation

Follow these steps to properly install your Redragon Power Supply into your computer system.

1. Prepare Your System:
   • Ensure your computer is completely powered off and unplugged from the wall outlet.
   • Open your computer case to access the PSU mounting area.
   • If replacing an old PSU, disconnect all cables from the old unit and remove it from the case.
2. Mount the Power Supply:
   • Carefully slide the Redragon PSU into the designated power supply bay in your computer case.
   • Align the screw holes on the PSU with those on the case.
   • Secure the PSU using the provided mounting screws.
3. Connect Modular Cables:

   Connect only the necessary modular cables to the power supply and your components. This PSU is full modular, allowing for cleaner cable management.

   • 24-pin ATX Motherboard Cable: Connect the large 24-pin connector to your motherboard's main power socket.
   • 8-pin EPS/CPU Cable (4+4 pin): Connect to your motherboard's CPU power socket. Some motherboards may require only 4 pins.
   • PCI-E Cables (6+2 pin): Connect to your graphics card(s). Ensure you use separate cables for each GPU power input if your card requires multiple.
   • SATA Power Cables: Connect to SATA devices such as SSDs, HDDs, and optical drives.
   • Molex Cables: Connect to older peripherals or case fans that use Molex connectors.
   

   Figure 5.1: Redragon 700W Power Supply with various modular cables connected, illustrating the full modular design.

4. Cable Management: Route cables neatly to improve airflow and aesthetics within your case.
5. Close Case and Connect Power: Once all connections are secure, close your computer case. Connect the AC power cord to the PSU's inlet and then to a wall outlet.

6. Operating Instructions

Operating your Redragon Power Supply is straightforward:

1. Power On: Ensure the power switch on the back of the PSU is in the 'ON' (I) position. Then, press the power button on your computer case.
2. Power Off: To turn off your computer, use the operating system's shutdown function. For a complete power cut, switch the PSU's power switch to the 'OFF' (O) position and unplug the AC cord.
3. Normal Operation: The PSU fan will operate automatically, adjusting its speed based on the internal temperature to maintain optimal cooling and noise levels.

7. Maintenance

Proper maintenance ensures the longevity and optimal performance of your power supply:

• Dust Removal: Periodically clean the power supply's fan grille and interior (if accessible without opening the unit) using compressed air. Dust buildup can impede airflow and lead to overheating. Always disconnect power before cleaning.
• Cable Check: Ensure all modular cables are securely connected to both the PSU and your components. Loose connections can cause instability.
• Environmental Conditions: Keep the computer in a cool, dry, and well-ventilated environment. Avoid placing it near heat sources or in direct sunlight.

8. Troubleshooting

If you encounter issues with your Redragon Power Supply, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact Redragon customer support for further assistance.

9. Specifications

10. Warranty and Support

Redragon products are built to the highest quality standards. This product is covered by a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Redragon website.

If you require technical support or have any questions regarding your Redragon Power Supply, please contact Redragon customer service through their official website or the contact information provided on your product packaging.

Website: www.redragonusa.com