Power Supply Defective Exclusion Test
This document outlines the procedure for performing a defective exclusion test on a power supply unit.
Items Needed for Testing
- Power supply
- AC power cord
- 24P cable
- Short connector
Power Supply Modular Insert 18+10P
The Redragon power supply features a fully modular design with 18+10 pin modular inserts for flexible cable management.
24P Plug-in Short Connector
A short connector is used to bridge specific pins on the 24-pin connector for testing purposes.
Light Switch Button
The power supply unit includes a light switch button, typically located on the rear panel.
850W RGB Power Supply
This section details the specifications for the 850W RGB Power Supply.
850W RGB Power RGS Power
Specifications for the Redragon 850W RGB Power Supply:
AC Input | 100-240Vac, 50-60Hz, 10A Max |
DC Output | +5V |
Current | 20A |
Max. Output | 100W |
Voltage | 100W |
AC Power Cable Plugged into Male Socket
The AC power cable should be securely plugged into the male socket on the power supply unit.
I/O Switch in the I Position
Ensure the I/O switch is in the 'I' (On) position. Pressing the button turns off the smart fan start/stop function.
Fan spinning: good power supply