Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your LDAILY Moccha Extendable Garment Rack. Please read this manual thoroughly before use to ensure proper setup and safe operation. Keep this manual for future reference.
Safety Information
- Ensure all parts are securely fastened before placing items on the rack.
- Do not exceed the maximum weight capacity of 33 lbs (15 kg). Overloading can cause instability and damage.
- Keep hands and fingers clear of moving parts during assembly and adjustment to prevent pinching.
- Use on a flat, stable surface to prevent tipping.
- This product is intended for indoor and outdoor domestic use. Avoid prolonged exposure to extreme weather conditions.
Package Contents
Verify that all components are present before beginning assembly:
- 1 x Extendable Garment Rack (disassembled components)
- 1 x Instruction Manual
Assembly Instructions
Follow these steps to assemble your garment rack. Refer to the diagrams for visual guidance.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface.
- Assemble Base: Connect the bottom horizontal bars to the vertical support legs using the plastic connectors. Ensure they click securely into place.
- Attach Casters: Insert the four rolling casters into the designated holes at the bottom of the support legs. Two of these casters have locking mechanisms.
- Install Hanging Rod: Attach the main hanging rod to the top of the vertical support legs. Use the clamps for height adjustment to secure it.
- Extend and Adjust: Extend the hanging rod to your desired length and adjust the height of the rack using the clamps on the vertical supports.
Image: Detailed view of garment rack features, highlighting the universal wheel with stopper, clamps for height adjustment, steel tubes for stability, and side hooks for bags. These components are key for assembly and functionality.
Image: Diagram showing the height adjustment and folding mechanism of the garment rack, demonstrating its multi-functional design for different needs and space-saving storage.
Operating Instructions
Adjusting Height and Length
The garment rack features an adjustable design for both height and length. To adjust the height, loosen the clamps on the vertical support legs, slide the rod to the desired height (between 39 and 66 inches), and then securely tighten the clamps. To extend the hanging rod, pull the inner rod outwards until it reaches the desired length, then ensure it is locked in place.
Using Rolling Casters
The rack is equipped with four 360-degree rotating wheels for easy mobility. To move the rack, simply unlock the two casters with stoppers by flipping their levers. To secure the rack in a stationary position, engage the stoppers on the two lockable wheels.
Folding and Storage
For space-saving storage, the garment rack can be folded. First, remove any items from the rack. Then, collapse the hanging rod to its minimum length and height. The support legs can be folded inwards, allowing the entire unit to become compact. This makes it suitable for storage under a bed or in a closet.
Image: The garment rack folded and stored compactly under a bed, demonstrating its space-saving design.
Image: The garment rack in use within a room, holding various clothing items, a hat, and a bag, showcasing its practical application.
Maintenance
- Cleaning: Wipe the metal and plastic surfaces with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Inspection: Periodically check all connections and fasteners to ensure they remain tight. Retighten if necessary.
- Caster Care: Keep the wheels free of debris to ensure smooth rolling.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Rack is unstable or wobbles. | Loose connections; uneven surface; overloaded. | Ensure all plastic connectors and clamps are securely tightened. Move the rack to a flat, level surface. Reduce the weight on the rack. |
| Casters do not roll smoothly. | Debris in wheels; casters locked. | Check wheels for hair or debris and remove. Ensure locking levers are in the unlocked position. |
| Height adjustment clamps slip. | Clamps not tightened enough; excessive weight. | Ensure clamps are fully tightened. Do not exceed the maximum weight capacity. |
Specifications
| Feature | Detail |
|---|---|
| Brand | LDAILY |
| Model Number | GT-JE54878 |
| Material | Metal, Plastic |
| Product Dimensions (L x W x H) | 35" x 19" x 39"-66" (Adjustable Height) |
| Maximum Weight Capacity | 33 lbs (15 kg) |
| Installation Type | Free Standing |
| Special Features | Adjustable, Durable, Flexible, Foldable, Rolling Casters |
| Item Weight | 6.16 pounds |
| UPC | 685764491211 |
Image: A diagram illustrating the key dimensions of the garment rack, including its adjustable height (39" to 66"), width (36"), and depth (19"), as well as its compact folded dimensions (39" height, 4.5" depth).
Warranty and Support
This product is manufactured by Moccha. For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact the seller directly. Keep your purchase receipt as proof of purchase.
