Eaton WFSW15-LA-SP-L Wi-Fi Smart Switch User Manual

1. Product Overview

The Eaton WFSW15-LA-SP-L Wi-Fi Smart Switch is designed to provide convenient control over your lighting and other connected devices. This smart switch integrates directly with the Amazon Alexa App, eliminating the need for a separate hub. It offers voice control capabilities, scheduling options, and enhanced safety features.

Key features include:

No Hub Required: Control devices directly through the Amazon Alexa App.
Easy Installation: Simple setup process with LED indicators for proper installation.
Voice Control: Compatible with Amazon Alexa for hands-free operation.
Scheduling and Routines: Program lights to adjust according to your daily schedule.
Added Safety: Features a Delay OFF function to keep lights on for a set period after activation.
Software Updates: Receives over-the-air updates for continuous feature enhancements and performance.

Eaton WFSW15-LA-SP-L Wi-Fi Smart Switch front view

Image 1.1: Front view of the Eaton WFSW15-LA-SP-L Wi-Fi Smart Switch.

2. Setup and Installation

2.1 Safety Information

WARNING: Risk of electric shock. Installation requires working with high voltage wiring. If you are unsure about any part of these instructions, consult a qualified electrician. Ensure power is turned off at the circuit breaker before installation.

2.2 Pre-installation Checklist

A neutral wire is required for installation. Verify its presence in your electrical box.
Compatible with LED/CFL up to 600W and INC/HAL/FLR/ELV/MLV up to 1800W.
Supports 1/2 HP motor loads.
Tools required: Screwdriver, wire strippers (if needed).

2.3 Wiring Instructions

Turn off power: Locate the circuit breaker controlling the switch you are replacing and turn it OFF. Verify power is off using a voltage tester.
Remove old switch: Carefully remove the existing wall plate and switch. Disconnect the wires.
Identify wires: Identify the Line (hot), Load, Neutral, and Ground wires. The smart switch requires a neutral wire.
Connect new switch: Connect the wires to the Eaton Wi-Fi Smart Switch using the quick connect terminals or screw terminals as follows:
- Connect the Ground wire to the green terminal.
- Connect the Neutral wire to the white terminal.
- Connect the Line wire to the black terminal labeled 'Line'.
- Connect the Load wire to the black terminal labeled 'Load'.
- For 3-way installations, refer to the detailed wiring diagrams provided in the product packaging. The smart switch can be wired with a standard 3-way switch.
Mount switch: Carefully push the wired switch into the electrical box. Secure it with the provided screws.
Install wall plate: Attach the new wall plate.
Restore power: Turn the power back ON at the circuit breaker. LED indicators on the switch will confirm proper installation.

Eaton WFSW15-LA-SP-L Wi-Fi Smart Switch side view with wiring terminals

Image 2.1: Side view of the smart switch showing wiring terminals.

2.4 App Setup (Amazon Alexa App)

After physical installation, set up your smart switch using the Amazon Alexa App:

Download the Amazon Alexa App: If you don't already have it, download the Amazon Alexa App from your device's app store.
Open the App: Launch the Alexa App and log in with your Amazon account.
Add Device: The app should automatically detect your new Eaton Wi-Fi Smart Switch. If not, navigate to the 'Devices' section, tap the '+' icon, and follow the on-screen instructions to add a new device.
Complete Setup: Follow the prompts to name your switch and assign it to a room.

Image 2.2: Visual guide for the three easy steps to set up your Wi-Fi smart device.

3. Operating Instructions

3.1 Manual Control

Press the top of the rocker switch to turn the connected lights/device ON. Press the bottom of the rocker switch to turn the connected lights/device OFF.

3.2 Voice Control with Amazon Alexa

Once your smart switch is connected to the Amazon Alexa App, you can use voice commands to control it. Ensure your Alexa-enabled device is powered on and connected to the internet.

To turn lights ON: "Alexa, turn on [device name]." (e.g., "Alexa, turn on living room lights.")
To turn lights OFF: "Alexa, turn off [device name]."

3.3 Scheduling and Routines

Use the Amazon Alexa App to create schedules and routines for your smart switch:

Schedules: Set specific times for your lights to turn ON or OFF automatically.
Routines: Combine multiple actions with a single command or trigger. For example, create a "Good Morning" routine that turns on your lights and plays news.

3.4 Delay OFF Feature

The Delay OFF feature allows you to set a duration for the lights to remain on before automatically turning off. This can be configured within the Amazon Alexa App settings for the device, providing convenience for safe exits.

3.5 Power Outage Preset

You can configure the smart switch's behavior after a power outage. This setting allows you to choose whether the device comes on or stays off once power is restored. This option is typically found in the device settings within the Amazon Alexa App.

4. Maintenance

4.1 Cleaning

To clean the smart switch, ensure power is turned off at the circuit breaker. Use a soft, damp cloth to wipe the surface. Do not use abrasive cleaners or solvents, as these can damage the finish.

4.2 Software Updates

The Eaton Wi-Fi Smart Switch receives over-the-air (OTA) software updates. These updates ensure your device has the latest features, security enhancements, and optimal performance. Updates are typically managed automatically through the Amazon Alexa App or your Wi-Fi network connection.

5. Troubleshooting

Switch not responding:
- Check if the circuit breaker is ON.
- Ensure the switch is properly wired and the LED indicators confirm correct installation.
- Verify your Wi-Fi network is active and the smart switch is within range.
- Restart the smart switch by turning off power at the breaker for 30 seconds, then turning it back on.
Connectivity issues with Alexa:
- Ensure your Alexa-enabled device is connected to the internet.
- Check the Amazon Alexa App to confirm the smart switch is still listed and online.
- If the switch frequently disconnects, try re-linking it through the Alexa App.
- Ensure your Wi-Fi network is 2.4 GHz, as this device may not support 5 GHz networks.
Difficulty with 3-way wiring:
Wiring a 3-way switch can be complex. If you encounter difficulties, especially with identifying traveler wires or connecting the line and load, it is recommended to consult a qualified electrician for assistance to ensure correct and safe installation.
Lights flickering or not working correctly:
- Verify that the connected bulbs are compatible with the smart switch's wattage ratings (LED/CFL up to 600W, INC/HAL/FLR/ELV/MLV up to 1800W).
- Ensure all wire connections are secure.

6. Specifications

Feature	Specification
Model Number	WFSW15-LA-SP-L
Operation Mode	OFF-NONE-ON
Current Rating	15 Amps
Operating Voltage	120 Volts
Contact Type	Normally Open
Connector Type	Quick Connect
Brand	Eaton
Terminal	Quick Connect
Item Dimensions (L x W x H)	2.42 x 3.77 x 5.04 inches
Circuit Type	Decorator/Rocker
Actuator Type	Rocker
Contact Material	Copper
International Protection Rating	IP02
Number of Positions	3
Controller Type	Amazon Alexa, Vera
Control Method	Voice
Connectivity Protocol	Wi-Fi
Color	Light Almond
Unit Count	1 Count
Item Weight	5.6 ounces
Compatible Devices	Amazon Alexa, Vera
UPC	032664760907
Smart Home Compatibility	Smart Home Compatible

7. Warranty Information

Specific warranty details for the Eaton WFSW15-LA-SP-L Wi-Fi Smart Switch are typically provided with the product packaging or can be found on the official Eaton website. Please refer to these sources for the most accurate and up-to-date warranty terms and conditions.

8. Support

For technical assistance, troubleshooting beyond this manual, or product inquiries, please contact Eaton customer support. Contact information can usually be found on the product packaging, the official Eaton website, or through your retailer.

When contacting support, please have your product model number (WFSW15-LA-SP-L) and purchase information readily available.

	Eaton WFSW15-LA-SP-L Wi-Fi Smart Decorator Switch - Product Specifications Detailed product specifications for the Eaton WFSW15-LA-SP-L Wi-Fi Smart Decorator Switch, including electrical ratings, installation details, material specifications, and available resources. Learn about its features for smart home automation.
	Eaton Wi-Fi Smart Device Quick Start Guide and Installation This guide provides step-by-step instructions for installing and setting up your Eaton Wi-Fi Smart Device with the Amazon Alexa app. Learn how to connect your smart home devices for voice control.
	Eaton Wi-Fi Smart Devices Configuration Parameters Configuration parameters and operation instructions for Eaton's Wi-Fi Smart Switch (WFSW15), Wi-Fi Smart Duplex Receptacle (WFTRCR15), and Wi-Fi Smart Universal Dimmer (WFD30).
	Eaton Wi-Fi Smart Voice Dimmer Installation and Operation Guide Comprehensive guide for installing and operating the Eaton Wi-Fi Smart Voice Dimmer, including wiring diagrams, troubleshooting tips, and warranty information.
	Eaton Aerospace Master Technical Publications Index List A comprehensive index of technical publications for Eaton Aerospace products, detailing part numbers, model numbers, document types, issue dates, aircraft platforms, and manufacturing sites. This list serves as a crucial resource for maintaining and servicing aerospace components.
	Eaton EWFFSC15 Wi-Fi Smart Fan Speed Control: Quick Start Guide Comprehensive quick start guide for the Eaton EWFFSC15 Wi-Fi Smart Fan Speed Control. Learn about installation, setup with the Brightlayer Home App, voice control with Alexa and Google Assistant, operation, troubleshooting, and warranty.