1. Introduction and Overview
The Case-Mate Power Pad Pro is a versatile 3-in-1 wireless charging solution designed to simultaneously charge your Qi-enabled smartphone, Apple AirPods, and Apple Watch. This device simplifies your charging experience by consolidating multiple chargers into one compact unit. It supports fast charging up to 10W for compatible devices and is Qi certified, ensuring safe and efficient power delivery.
Image 1.1: The Case-Mate Power Pad Pro 3-in-1 Wireless Charger, shown with an iPhone, Apple Watch, and AirPods actively charging on its surface.
2. Package Contents
Please verify that all items are present in your package:
- 1 x Case-Mate Power Pad Pro 3-in-1 Wireless Charging Stand
- 1 x USB-A to USB-C Charging Cable
- 1 x 24W Charging Block (Power Adapter)
3. Setup Instructions
- Connect to Power: Insert the USB-C end of the provided charging cable into the USB-C port on the back of the Power Pad Pro. Connect the USB-A end of the cable to the included 24W charging block, then plug the charging block into a standard wall outlet.
- Power Indicator: A small LED light on the front of the Power Pad Pro will illuminate briefly upon successful connection to power, indicating it is ready for use.
Image 3.1: A user carefully placing an iPhone onto the upright charging pad of the Power Pad Pro.
4. Operating Instructions
The Power Pad Pro allows for simultaneous charging of up to three devices:
- Smartphone Charging: Place your Qi-enabled smartphone vertically on the upright charging stand. Ensure the phone is centered on the charging area. The LED indicator will confirm charge initiation. The charger provides 10W fast charging for Samsung devices and 7.5W fast charging for Apple devices. The stand also functions as a phone stand for upright viewing while charging.
- AirPods Charging: Place your Apple AirPods (or AirPods Pro) charging case onto the designated charging pad on the left side of the unit. Ensure the case is properly aligned.
- Apple Watch Charging: Attach your Apple Watch (up to Series 7) to the magnetic charging module on the left side, above the AirPods charging area. The watch will magnetically snap into place.
A 10-second LED light indicator confirms charge initiation upon contact for each device.
Image 4.1: The Power Pad Pro charging an iPhone, Apple Watch, and AirPods, demonstrating its multi-device capability.
5. Maintenance
To ensure the longevity and optimal performance of your Power Pad Pro, follow these maintenance guidelines:
- Cleaning: Disconnect the charger from power before cleaning. Use a soft, dry, lint-free cloth to wipe the surface. Do not use abrasive cleaners, solvents, or aerosol sprays.
- Avoid Liquids: Keep the device away from water and other liquids.
- Temperature: Store and operate the charger in a moderate temperature environment. Avoid extreme heat or cold.
- Handling: Handle the device with care. Avoid dropping or subjecting it to strong impacts.
6. Troubleshooting
If you encounter issues with your Power Pad Pro, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not charging or charging slowly. | Improper device placement; non-Qi compatible device; insufficient power supply; thick phone case. | Ensure device is centered on the charging pad. Verify device is Qi-enabled. Use the included 24W charging block and cable. Remove thick phone cases. |
| LED indicator not lighting up. | No power connection; faulty cable/adapter. | Check if the charging block is securely plugged into the wall outlet and the cable is firmly connected to both the charger and the block. Try a different outlet. |
| Apple Watch or AirPods not charging. | Incorrect alignment; specific model incompatibility (e.g., older Apple Watch models); power issue. | Ensure the Apple Watch is correctly seated on the magnetic charger. For AirPods, ensure the case is flat and centered. Verify your Apple Watch model is supported (up to Series 7). Confirm the main power connection is stable. |
7. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 5 x 7 x 4 inches |
| Item Weight | 1.5 pounds |
| Model Number | CM042196 |
| Manufacturer | Case-Mate |
| Connectivity Technology | Wireless |
| Connector Type | USB |
| Compatible Devices | Cellular Phones, Apple AirPods, Apple Watch (up to Series 7) |
| Input Voltage | 5 Volts |
| Color | Space Gray |
| Mounting Type | Tabletop Mount |
8. Warranty and Support
The Case-Mate Power Pad Pro comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use. For warranty claims or technical support, please contact Case-Mate customer service directly through their official website or the retailer where the product was purchased.
Please retain your proof of purchase for warranty validation.
