Introduction
The Harman Kardon Citation Surround is a next-generation wireless surround sound speaker designed to provide an immersive audio experience. This manual provides essential information for setting up, operating, and maintaining your Citation Surround speakers.
For optimal performance, it is recommended to pair these speakers with a Harman Kardon Citation Bar, Citation Sub, and/or Citation Tower to achieve a full 5.1 home theater surround sound experience.
Package Contents
Upon opening the package, verify that all the following components are present:
- 2 x Harman Kardon Citation Surround Speakers
- 2 x Wall Mount Brackets
- 1 x Quick-start Guide
- 1 x Warranty Sheet
- 1 x Safety Sheet
- 2 x Power Cables (1.8m each)
Image: Two Harman Kardon Citation Surround speakers, shown side-by-side, illustrating the pair included in the package.
Setup
Speaker Placement
For optimal surround sound, position the Citation Surround speakers behind or to the sides of your primary listening area. Ensure they are equidistant from the listening position and at ear level when seated.
Image: Harman Kardon Citation Surround speakers shown on optional floor stands, demonstrating a typical placement setup.
Power Connection
- Connect one end of the provided power cable to the power input port on the back of each Citation Surround speaker.
- Plug the other end of the power cable into a functional wall outlet.
- The speakers will automatically power on and enter pairing mode.
Wireless Pairing
The Citation Surround speakers are designed for wireless connectivity. To integrate them into your home theater system:
- Ensure your Harman Kardon Citation Bar or Citation Tower is powered on and in pairing mode.
- Follow the instructions in the Quick-start Guide or the main system's manual to wirelessly connect the Citation Surround speakers.
- A successful connection will be indicated by a specific light pattern on the speakers (refer to the Quick-start Guide for details).
Operating Instructions
Audio Playback
Once paired with a compatible Harman Kardon Citation soundbar or tower, the Citation Surround speakers will automatically function as part of your 5.1 surround sound system. Audio will be distributed to the speakers as intended by the source material.
Volume Control
Volume for the Citation Surround speakers is controlled through the main Citation system (e.g., Citation Bar or Citation Tower) they are paired with. There are no independent volume controls on the surround speakers themselves.
Automatic Software Updates
The Citation Surround speakers receive automatic software updates to ensure optimal performance and access to the latest features. Ensure the speakers are connected to power and your home network (via the main Citation system) for updates to be applied.
Maintenance
Cleaning
- Disconnect the speakers from power before cleaning.
- Use a soft, dry cloth to wipe down the speaker surfaces.
- Do not use liquid cleaners, aerosols, or abrasive cleaning agents, as these may damage the finish or internal components.
Storage
If storing the speakers for an extended period, disconnect them from power and store them in a cool, dry place, away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from speakers. | Speakers not powered on or not paired. | Ensure power cables are securely connected. Verify speakers are paired with the main Citation system. Refer to the Quick-start Guide for pairing instructions. |
| Sound is intermittent or distorted. | Wireless interference or speakers too far from main system. | Reduce distance between speakers and main Citation system. Move speakers away from other wireless devices (e.g., Wi-Fi routers, cordless phones). |
| Speakers not responding. | Temporary software glitch. | Disconnect power from the speakers for 30 seconds, then reconnect. This may reset the internal system. |
If the issue persists after attempting these solutions, please refer to the comprehensive troubleshooting section in the main Citation system's user manual or contact customer support.
Specifications
Image: A single Harman Kardon Citation Surround speaker with its dimensions (height, width, depth) clearly indicated.
- Model Name: Citation Surround
- Model Number: 028292283802
- Product Dimensions (H x W x D): 27.3 cm x 10.5 cm x 8.6 cm (10.75 in x 4.13 in x 3.39 in)
- Weight: Approximately 2.03 kg (4.48 lbs) per speaker
- Speaker Type: Wireless Surround Sound Speaker
- Audio Output Mode: Surround
- Surround Sound Channel Configuration: 5.1 (when paired with compatible Citation system)
- Connectivity Technology: Wireless
- Speaker Amplification Type: Passive (receives signal wirelessly from main system)
- Nominal Output Power: 100 Watts (total system power, specific to surround speakers not detailed)
- Signal-to-noise ratio (dB): 80 dB
- Power Source Type: AC Power (via included power cable)
- Mounting Type: Tabletop / Wall Mountable
- Compatible Devices: Harman Kardon Citation Bar, Citation Tower, Citation Sub
- Special Features: Automatic Software Updates
Warranty Information
The Harman Kardon Citation Surround speakers come with a Limited Warranty. Please refer to the Warranty Sheet included in your package for detailed terms and conditions, including coverage period, exclusions, and how to make a claim.
Retain your proof of purchase for warranty validation.
Customer Support
For further assistance, technical support, or service inquiries, please refer to the official Harman Kardon website or contact their customer service department. Contact information can typically be found on the Warranty Sheet or Quick-start Guide provided with your product.
You may also find additional resources and FAQs on the Harman Kardon support portal online.
