Introduction
This manual provides essential information for the proper setup, operation, and maintenance of your Fila Unisex Silicone Analog Watch, Model 38-315-003WHRD. Please read these instructions carefully to ensure optimal performance and longevity of your timepiece.
Setup
Setting the Time
- Pull out the crown: Locate the small knob (crown) on the right side of the watch case. Gently pull it out to the first or second click position.
- Adjust the hands: Rotate the crown clockwise or counter-clockwise to move the hour and minute hands to the correct time.
- Push in the crown: Once the time is set, push the crown back into its original position against the watch case. This will start the watch movement.
Adjusting the Strap
The silicone strap features a standard buckle clasp. Adjust the strap by inserting the pin into the desired hole for a comfortable and secure fit on your wrist. Ensure the watch is not too tight or too loose.
Image: The Fila Unisex Silicone Analog Watch, Model 38-315-003WHRD, shown with its white silicone strap and two additional interchangeable silicone covers in white and red. The watch face is white with blue and red accents on the hands and Fila logo.
Operating
Timekeeping
Your Fila watch uses a Japanese Quartz movement for accurate timekeeping. Once the time is set, the watch will continuously display the current time.
Water Resistance
This watch is water-resistant up to 50 meters (5 ATM). This means it is suitable for everyday use and can withstand splashes, rain, and brief immersion in water, such as showering or shallow swimming. It is not suitable for diving or high-impact water sports. Do not operate the crown while the watch is wet or submerged.
Maintenance
Cleaning
To clean your watch, wipe the case and strap with a soft, damp cloth. For silicone straps, mild soap and water can be used. Ensure the watch is completely dry before wearing. Avoid using harsh chemicals or abrasive materials.
Battery Replacement
The watch is powered by a lithium metal battery. When the watch stops running, the battery may need replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.
Storage
When not in use, store your watch in a cool, dry place away from direct sunlight and extreme temperatures. Avoid placing it near magnetic fields, which can affect the watch's accuracy.
Troubleshooting
- Watch not running: Check if the crown is fully pushed in. If it is, the battery may need replacement.
- Incorrect time: Reset the time as described in the "Setting the Time" section. If the time consistently becomes inaccurate, the watch may require servicing.
- Condensation under crystal: This indicates a loss of water resistance. Avoid further contact with water and seek professional service immediately.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 38-315-003WHRD |
| Brand | Fila |
| Display Type | Analog |
| Movement | Japanese Quartz |
| Case Material | Stainless Steel |
| Case Diameter | 41 mm |
| Case Thickness | 9 mm |
| Band Material | Silicone |
| Band Width | 22 mm |
| Band Color | White |
| Dial Color | White |
| Watch Glass Material | Mineral Glass |
| Water Resistance Depth | 50 meters (5 ATM) |
| Power Source | Battery Powered (1 Lithium Metal battery included) |
| Item Weight | 600 grams |
| First Available Date | October 14, 2020 |
Warranty and Support
Warranty Information
This Fila watch comes with a 6-month limited warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage resulting from improper handling, accidents, unauthorized repairs, or normal wear and tear.
Customer Support
For warranty claims, technical assistance, or any questions regarding your Fila watch, please contact your retailer or the authorized Fila service center. Please have your proof of purchase and watch model number ready when contacting support.
