APDTY 142371 Remanufactured Infotainment Module

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of your APDTY 142371 Remanufactured Infotainment Module. This module is designed to replace original equipment manufacturer (OEM) parts 22776895 and 25966513, offering a reliable solution for your vehicle's infotainment needs. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Safety Information

WARNING: California Proposition 65

This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Always disconnect the vehicle's battery before performing any electrical work. Professional installation is highly recommended to prevent damage to the module or vehicle's electrical system. Do not attempt to disassemble or modify the module.

3. Product Overview

The APDTY 142371 Infotainment Module is a remanufactured unit featuring RPO Code UUK, which includes AM-FM Stereo, Seek/Scan, Auto Tone, CD, CD-R, MP3, DVD, Navigation, ETR, RDS, USB Port, and Clock functionalities. It does not include RPO Code UL8 (Saudi Arabian Radio).

3.1. Key Features

• Remanufactured to meet or exceed OEM specifications.
• Integrated AM-FM Stereo with Seek/Scan and Auto Tone.
• Supports CD, CD-R, MP3, and DVD playback.
• Built-in Navigation system.
• Equipped with ETR (Electronic Tuner Receiver), RDS (Radio Data System), and USB Port.
• Includes a digital clock display.
• Direct replacement for OEM part numbers 22776895 and 25966513.

3.2. Component Identification

Figure 1: Front view of the infotainment module, showing the display screen, control buttons (NAV, DEST, RPT, FAV, AUDIO, MENU, SEEK), and rotary knobs.

Figure 2: Angled front view, highlighting the CD/DVD slot and additional control buttons.

Figure 3: Top and rear view of the module, showing the metal casing and various mounting points.

Figure 4: Rear view, illustrating the various electrical connectors and antenna ports for vehicle integration.

4. Setup and Installation

Installation of the APDTY 142371 Infotainment Module requires specific automotive knowledge and tools. It is strongly recommended that installation be performed by a certified automotive technician.

4.1. Pre-Installation Checks

1. Verify vehicle compatibility using the chart in Section 7.
2. Ensure the vehicle's battery is disconnected before beginning any work.
3. Inspect the new module for any visible damage.

4.2. Installation Steps (General)

1. Carefully remove the existing infotainment unit from the vehicle's dashboard, following the vehicle manufacturer's service manual.
2. Disconnect all electrical connectors and antenna cables from the old unit.
3. Connect the corresponding electrical connectors and antenna cables to the new APDTY 142371 module. Ensure all connections are secure.
4. Mount the new module securely into the dashboard opening.
5. Reconnect the vehicle's battery.
6. Test the module's functionality (power, audio, navigation, etc.) before fully reassembling the dashboard trim.
7. Reassemble the dashboard trim components.

5. Operating Instructions

Once installed, the infotainment module operates similarly to the original equipment. Refer to your vehicle's owner's manual for specific instructions on using the integrated features.

5.1. Basic Functions

• Power On/Off: Typically controlled by the vehicle's ignition or a dedicated power button on the unit.
• Audio Control: Use the AUDIO button and rotary knobs to adjust volume, select audio sources (AM/FM, CD, USB), and tune stations.
• Navigation: Press the NAV button to access the navigation system. Use the DEST (Destination) button to input addresses or points of interest.
• Media Playback: Insert CDs or DVDs into the disc slot. Connect USB devices to the USB port for media playback.
• Menu/Settings: The MENU button provides access to system settings, audio adjustments, and display options.

6. Maintenance

The APDTY 142371 Infotainment Module is designed for long-term reliability with minimal maintenance.

• Cleaning: Use a soft, dry cloth to clean the display screen and exterior surfaces. For stubborn marks, a slightly damp cloth with mild, non-abrasive cleaner can be used, but avoid spraying liquids directly onto the unit.
• Software Updates: Any necessary software updates would typically be performed by a qualified service center or through vehicle manufacturer protocols.
• Avoid Liquids: Do not expose the module to excessive moisture or liquids.

7. Troubleshooting

If you encounter issues with your infotainment module, try the following basic troubleshooting steps. For complex problems, consult a professional technician.

• No Power: Check vehicle fuses related to the infotainment system. Ensure all electrical connections to the module are secure.
• No Audio: Verify volume settings. Check speaker connections. Ensure the correct audio source is selected.
• Disc Read Errors: Ensure the disc is clean and free of scratches. Try a different disc.
• Navigation Issues: Ensure the vehicle is in an open area with clear GPS signal. Check for any system error messages.
• USB Device Not Recognized: Ensure the USB device is formatted correctly and contains compatible media files. Try a different USB device.

8. Specifications

9. Vehicle Compatibility

This remanufactured infotainment module is compatible with the following vehicle models and years. Please ensure your vehicle matches these specifications and has RPO Code UUK, and does NOT have RPO Code UL8.

• 2010-2011 Chevrolet Avalanche
• 2010-2011 Chevrolet Silverado 1500
• 2010-2011 Chevrolet Silverado 2500 HD
• 2010-2011 Chevrolet Silverado 2500
• 2010-2011 Chevrolet Silverado 3500 HD
• 2010-2011 Chevrolet Silverado 3500
• 2010-2011 Chevrolet Suburban 1500
• 2010-2011 Chevrolet Suburban 2500
• 2010-2011 Chevrolet Tahoe
• 2010-2011 GMC Sierra 1500
• 2010-2011 GMC Sierra 2500 HD
• 2010-2011 GMC Sierra 3500 HD
• 2010-2011 GMC Sierra
• 2010-2011 GMC Yukon XL 1500
• 2010-2011 GMC Yukon XL 2500
• 2010-2011 GMC Yukon

10. Warranty and Support

This product is covered by a return policy allowing returns within 30 days of purchase. For specific warranty details and support inquiries, please refer to the seller's terms and conditions or contact APDTY customer service directly.

For additional assistance, please visit the APDTY Store on Amazon: APDTY Store