Bell+Howell TRIBURST Garage Lights Instruction Manual

1. Product Overview

The Bell+Howell TRIBURST Garage Light is an ultra-bright, multi-directional LED lighting solution designed to illuminate large spaces such as garages, basements, and workshops. It features three independently adjustable LED panels, providing 4000 lumens of cool white light from a single E26/E27 lightbulb socket.

Figure 1: Bell+Howell TRIBURST Garage Lights (2-pack)

Key Features:

• Super Bright Illumination: 4000 lumens of 6500K cool white light.
• Adjustable Panels: Three multi-directional aluminum LED panels can be independently angled for optimal light coverage.
• Easy Installation: Screws directly into standard E26/E27 lightbulb sockets, requiring no wiring or special tools.
• Durable Construction: Made with heavy-duty industrial-grade aluminum for maximum durability and heat dissipation.
• Energy Efficient: 60-Watt LEDs designed for long life and low power consumption.

2. Setup and Installation

The Bell+Howell TRIBURST Garage Light is designed for quick and easy installation. No complex wiring or additional batteries are required.

Installation Steps:

1. Ensure Power is Off: Before installation, turn off the power to the light fixture at the circuit breaker to prevent electrical shock.
2. Remove Existing Bulb: Carefully unscrew and remove any existing lightbulb from the E26/E27 socket.
3. Screw in TRIBURST Light: Screw the Bell+Howell TRIBURST Garage Light into the standard E26/E27 lightbulb socket until it is securely fastened. Do not overtighten.
4. Adjust Panels: Once installed, you can manually adjust the three aluminum LED panels to direct light precisely where it is needed. Each panel can be angled independently.
5. Restore Power: Turn the power back on at the circuit breaker. The light should illuminate immediately.

Figure 2: Tool-free installation by screwing into the socket.

3. Operating Instructions

The TRIBURST Garage Light operates like a standard lightbulb once installed. Its primary feature is the adjustable panels, allowing for customized light distribution.

Adjusting Light Direction:

• The three LED panels are hinged and can be moved manually.
• Gently push or pull each panel to achieve the desired angle.
• Angles can range from fully closed (0 degrees) to fully open (90 degrees) relative to the main body.
• This allows you to focus light on specific work areas or spread it evenly across the room.

Figure 3: Adjusting the 3-LED panels to choose the area to light up.

4. Maintenance

The Bell+Howell TRIBURST Garage Light is designed for long-term, maintenance-free operation. The LED bulbs are rated to last up to 50,000 hours.

Cleaning:

• Ensure the light is turned off and cooled down before cleaning.
• Wipe the surfaces with a soft, dry cloth.
• Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.

5. Troubleshooting

If you encounter any issues with your TRIBURST Garage Light, please refer to the following common troubleshooting steps:

• Light does not turn on:
  • Check if the power switch is on.
  • Verify that the circuit breaker for the light fixture is not tripped.
  • Ensure the light is securely screwed into the socket.
  • Confirm that the socket itself is functional by testing with another known working bulb.
• Light is dim or flickers:
  • Ensure the light is fully screwed into the socket. A loose connection can cause dimming or flickering.
  • Check for any debris or dust in the socket that might interfere with the connection.
  • Verify that the electrical supply voltage is stable and within the specified range (120 Volts).

If these steps do not resolve the issue, please contact customer support.

6. Specifications

7. Warranty and Support

For information regarding product warranty, returns, or technical support, please contact Bell+Howell customer service. Keep your purchase receipt as proof of purchase.

For further assistance, visit the official Bell+Howell website or refer to the contact information provided with your product packaging.