EGLO Mill Street 204006A Semi-Flush Mount LED Fixed Track Light Instruction Manual

1. Introduction

This manual provides detailed instructions for the safe installation, operation, and maintenance of your EGLO Mill Street Semi-Flush Mount LED Fixed Track Light. Please read this manual thoroughly before installation and retain it for future reference.

The EGLO Mill Street four-light track light features a simple, stylish design suitable for contemporary or transitional interiors. It includes adjustable integrated LED lights and a brushed nickel finish, providing both directional accent lighting and task lighting.

2. Safety Information

WARNING: Please check your local laws before purchasing and installing this product. This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

• Always disconnect power at the main fuse or circuit breaker before installation or servicing.
• Installation must be performed by a qualified electrician in accordance with all local electrical codes.
• Ensure the mounting surface can support the weight of the fixture.
• Do not attempt to modify the fixture.
• Use only with compatible dimmers if dimming functionality is desired.

3. Package Contents

Verify that all components are present before beginning installation:

• EGLO Mill Street Semi-Flush Mount LED Fixed Track Light Fixture
• Integrated LED Bulbs (4)
• Mounting Hardware
• Instruction Manual

4. Specifications

5. Setup and Installation

Before you begin: Ensure power is OFF at the circuit breaker. Read all instructions carefully.

1. Prepare the Mounting Location: Identify the electrical box in your ceiling where the fixture will be installed. Ensure it is securely mounted and capable of supporting the fixture's weight.
2. Attach Mounting Bracket: Secure the mounting bracket (included) to the electrical box using the provided screws.
3. Electrical Connections:
   • Connect the fixture's ground wire (usually bare copper or green) to the ground wire from the electrical box.
   • Connect the fixture's white wire (neutral) to the white wire from the electrical box.
   • Connect the fixture's black wire (hot) to the black wire from the electrical box.
   • Secure all connections with wire nuts (not included, typically).
4. Mount the Fixture: Carefully align the fixture with the mounting bracket and secure it using the provided screws. Ensure no wires are pinched.
5. Restore Power: Once the fixture is securely mounted and all connections are made, restore power at the circuit breaker.

Figure 1: EGLO Mill Street Semi-Flush Mount LED Fixed Track Light. This image shows the overall appearance of the fixture with its four adjustable LED heads and brushed nickel finish.

Figure 2: Dimensions of the EGLO Mill Street Track Light. The image indicates a length of 32.99 inches and a height of 7.52 inches, providing a visual reference for installation planning.

6. Operating Instructions

• Turning On/Off: Operate the light fixture using a standard wall switch connected to the electrical circuit.
• Adjusting Light Heads: Each of the four LED light heads can be individually adjusted to direct light to specific areas. Gently pivot or rotate the heads to achieve the desired lighting angle.
• Dimming Functionality: This fixture is dimmable. To utilize the dimming feature, ensure you have a compatible LED dimmer switch installed on the circuit. Follow the dimmer switch manufacturer's instructions for operation.

7. Maintenance

• Cleaning: To clean the fixture, ensure power is off. Wipe with a soft, dry or slightly damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish.
• LED Replacement: The LED lights are integrated and not designed for user replacement. If the LEDs fail, contact EGLO customer support for assistance.

8. Troubleshooting

• Light does not turn on:
  • Check if the power switch is in the "ON" position.
  • Verify that the circuit breaker is not tripped.
  • Ensure all electrical connections are secure. If unsure, consult a qualified electrician.
• Light flickers or dims improperly:
  • Ensure you are using a compatible LED dimmer switch.
  • Check for loose electrical connections.

9. Warranty and Support

This EGLO product comes with a 5-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. For warranty claims or technical support, please contact EGLO customer service.

For more information or to contact EGLO directly, please visit the official EGLO Store on Amazon: EGLO Store