Introduction
This manual provides instructions for the assembly, operation, and maintenance of your BANDAI 1/100 Master Grade ZGMF-X56S / γ Blast Impulse Gundam model kit. This highly detailed model kit is designed for enthusiasts aged 15 years and up, offering a rewarding building experience and a highly articulated finished product.
Product Features
The Blast Impulse Gundam model kit features the distinctive "Blast Silhouette" artillery unit, reproduced with new molding and high-density details compliant with the Master Grade series standards. Key features include:
- Blast Silhouette: A three-dimensional artillery unit with various integrated gimmicks.
- Kerberos High-Energy Long-Range Beam Guns: Capable of forward deployment for attack poses.
- Deluge Ultra High-Speed Rail Gun: Features movable parts for dynamic posing and can reproduce hover movement forms.
- Beam Javelin Storage Rack: Equipped with an opening and closing gimmick.
- VPS Armor Color: The Impulse Gundam body is molded in dark blue, reflecting its VPS armor color when equipped with the Blast Silhouette.
- Color-Coded Parts: Fine parts are color-coded for enhanced detail.
- Defiant Beam Javelin: A newly modeled weapon mounted on the Blast Silhouette.
- Water Transfer Decals: Includes Zaft mark and other markings for detailed customization.
Package Contents
The model kit package includes the following components:
- Impulse Gundam Body parts
- Blast Silhouette unit
- Defiant Beam Javelin
- Beam Rifle
- Shield
- Water transfer decals
- Instruction manual (this document)
Setup and Assembly
Assembly of this Master Grade model kit requires careful attention to detail. Please follow the included graphical instructions provided within the kit packaging for step-by-step guidance. Basic tools such as nippers, a hobby knife, and tweezers are recommended for optimal assembly.
- Part Preparation: Carefully cut each part from its runner using nippers. Ensure clean cuts to avoid stress marks.
- Sub-Assembly: Assemble smaller sections (e.g., limbs, head, torso) as indicated in the graphical instructions.
- Blast Silhouette Assembly: Construct the Blast Silhouette unit, paying attention to the movable gimmicks for the Kerberos beam guns and Deluge rail gun.
- Main Body Assembly: Combine the sub-assemblies to form the complete Impulse Gundam body.
- Weapon Assembly: Assemble the Beam Rifle, Shield, and Defiant Beam Javelin.
- Decal Application: Apply the water transfer decals as desired for added detail. Refer to the decal placement guide in the kit instructions.
- Final Attachment: Attach the Blast Silhouette and weapons to the Impulse Gundam body.
Figure 1: Front view of the fully assembled Blast Impulse Gundam, showcasing its detailed design and artillery unit.
Figure 2: Rear view of the Blast Impulse Gundam, emphasizing the intricate details of the Blast Silhouette backpack and thrusters.
Operating and Posing
The Master Grade Blast Impulse Gundam is designed with extensive articulation, allowing for a wide range of dynamic poses. Handle the model with care to avoid damaging delicate parts.
- Joint Articulation: Utilize the various ball joints and hinges in the limbs, torso, and head to achieve desired poses.
- Blast Silhouette Deployment: The Kerberos high-energy long-range beam guns can be deployed forward from the Blast Silhouette. The Deluge ultra high-speed rail gun also features movable sections for posing.
- Weapon Handling: Position the Beam Rifle, Shield, and Defiant Beam Javelin in the model's hands or attach them to designated hardpoints.
- Hover Movement: The thrusters on the Blast Silhouette are movable, allowing for recreation of hover movement forms.
Figure 3: The Blast Impulse Gundam deploying its Deluge ultra high-speed rail gun, demonstrating its operational features.
Figure 4: The Blast Impulse Gundam in an action pose, utilizing the defiant beam javelin.
Maintenance
Proper care will ensure the longevity and appearance of your model kit.
- Cleaning: Dust the model regularly with a soft brush or compressed air. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the model in a cool, dry place away from direct sunlight to prevent discoloration or material degradation.
- Joint Care: If joints become loose over time, a thin layer of clear nail polish or hobby-specific joint tightener can be applied to the male peg and allowed to dry before reassembly.
Troubleshooting
If you encounter issues during assembly or with the finished model, consider the following:
- Loose Parts: Ensure all parts are fully pressed together. For persistent looseness, refer to the joint care advice in the Maintenance section.
- Stuck Joints: If a joint is too tight, gently twist and apply slight pressure. Do not force it, as this may cause breakage. A small amount of silicone lubricant can sometimes help.
- Missing Parts: Double-check the runners and packaging. If a part is genuinely missing, contact the retailer or manufacturer's customer support.
- Decal Issues: If water transfer decals do not adhere properly, ensure the surface is clean and use a decal setting solution if necessary.
Specifications
| Attribute | Detail |
|---|---|
| Model Name | ZGMF-X56S / γ Blast Impulse Gundam |
| Scale | 1/100 |
| Series | Master Grade (MG) |
| Manufacturer | Banbai Hobby |
| Item Model Number | ban000993344 |
| ASIN | B083Z4WQC7 |
| Package Dimensions | 15.75 x 12.6 x 3.86 inches |
| Item Weight | 1.94 pounds |
| Recommended Age | 15 years and up |
Safety Information
This product contains small parts and is not suitable for children under 3 years of age due to choking hazards. Adult supervision is recommended during assembly for individuals under the recommended age. Exercise caution when using hobby knives and other sharp tools during assembly.
Warranty and Support
Information regarding specific warranty terms or direct manufacturer support contacts for this product is not available in the provided data. Please refer to your retailer's return policy or contact the point of purchase for assistance with product defects or missing parts.
