Sunbeam Heated Throw Blanket User Manual

Introduction

Thank you for choosing the Sunbeam Heated Throw Blanket. This manual provides important information for the safe and efficient use of your new heated throw. Designed for comfort and warmth, this fleece throw features Sunbeam's ThermoFine warming system, which senses and adjusts to deliver consistent warmth. It includes a controller with three heat settings and a 3-hour auto-off function for peace of mind.

Important Safety Instructions

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

• Read all instructions before using this heated throw.
• Do not use with generators, power converters, or inverters.
• Do not use with damaged cords or plugs. If the cord or plug is damaged, do not use the product.
• Do not use with pins or other metallic objects.
• Do not use on an infant, a child, an invalid, or any person insensitive to heat.
• Do not use on pets.
• Do not use if wet.
• Do not dry clean this product. Dry cleaning solvents may damage the insulation of the heating element.
• Do not tuck in, pinch, or fold the heating wires.
• Do not use this product with an adjustable bed.
• Do not use this product in conjunction with another heating appliance.
• Always unplug this product from the electrical outlet when not in use.
• Store the product loosely. Do not wrap the cord tightly around the controller when storing.

Setup

1. Unpack the Throw: Carefully remove the heated throw and controller from its packaging.
   

   Image: The Sunbeam Heated Throw Blanket, folded, showing its blue plaid pattern and the attached controller.

2. Connect the Controller: Locate the connector on the heated throw and the corresponding plug on the controller cord. Ensure they are aligned correctly and push firmly until they click into place.
   

   Image: The Sunbeam heated throw blanket's controller and power cord, showing the connection point for the blanket and the wall plug.

3. Plug into Power: Plug the power cord into a 120V AC electrical outlet. Ensure the cord is not pinched or covered by the blanket or furniture.
4. Position the Throw: Lay the heated throw flat on a sofa, chair, or bed. Avoid bunching or folding the blanket excessively, as this can concentrate heat and potentially damage the internal wiring.

Operating Instructions

Your Sunbeam Heated Throw Blanket is designed for ease of use with its intuitive controller.

Image: A close-up view of the Sunbeam heated throw blanket's controller, showing the power button and indicators for High, Med, and Low heat settings, along with the "Auto-Off 3 Hours" label.

1. Turning On: Press the power button (large circular button) on the controller to turn on the heated throw. The indicator light will illuminate.
2. Adjusting Heat Settings:
   • Press the power button repeatedly to cycle through the heat settings: High, Med, Low.
   • The corresponding indicator light (High, Med, Low) will light up to show the selected setting.
   • Allow a few minutes for the blanket to reach the desired temperature.
3. Auto-Off Feature: The heated throw is equipped with a 3-hour auto-off feature for safety and energy conservation. After approximately 3 hours of continuous use, the throw will automatically turn off. To restart, simply press the power button again.
4. Turning Off: To turn off the heated throw manually, press the power button until all indicator lights are off, or unplug the unit from the wall outlet.

Maintenance and Care

Proper care will ensure the longevity and performance of your Sunbeam Heated Throw Blanket.

Washing Instructions:

1. Disconnect: Always disconnect the controller from the throw and unplug the power cord from the wall outlet before washing.
2. Pre-soak (Optional): For best results, pre-soak the throw for 15 minutes in cold water with a mild detergent.
3. Machine Wash: Machine wash on the "delicate" or "gentle" cycle in cold water (30°C / 86°F) using a small amount of mild detergent. Do not use bleach.
4. Rinse: Rinse on the "normal" cycle.
5. Machine Dry: Tumble dry on low heat (delicate/gentle cycle) for 5-10 minutes. Remove while still damp and gently stretch to original size.
6. Air Dry: Drape the heated throw over a clothesline or shower rod. Do not use clothespins. Ensure the throw is completely dry before reconnecting the controller and plugging it back in.

Storage:

When not in use, store the heated throw loosely in a cool, dry place. Do not wrap the power cord tightly around the controller, as this can damage the cord.

Troubleshooting

Specifications

• Brand: Sunbeam
• Model: Heated Throw Blanket (Blue Plaid)
• Material: Fleece
• Color: Blue Plaid
• Heat Settings: 3 (High, Med, Low)
• Auto-Off: 3 Hours
• Power: 120V AC
• Product Care: Machine Washable, Dryer Safe
• Item Weight: 3.65 pounds
• Package Dimensions: 12.83 x 9.76 x 8.43 inches
• UPC: 053891123617

Warranty and Support

This Sunbeam Heated Throw Blanket comes with a 5-year limited warranty. For warranty claims, technical support, or any questions regarding your product, please contact Sunbeam Customer Service.

Please visit the official Sunbeam website for the most up-to-date contact information and support resources: www.sunbeam.com