Dibea D18 Cordless Stick Vacuum Cleaner

Introduction

Thank you for choosing the Dibea D18 Cordless Stick Vacuum Cleaner. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new vacuum cleaner. Please read it thoroughly before first use and keep it for future reference.

The Dibea D18 is designed for versatile cleaning, offering powerful suction in a lightweight, cordless design. Its features include:

• Rechargeable battery with ergonomic handle for tangle-free cleaning.
• Two-speed control for effective cleaning on various surfaces.
• Wide floor brush with LED lighting for improved visibility.
• Ability to clean under furniture (over 8 cm clearance) and reach up to 90 cm deep.
• Washable filter cotton design for durability and repeated cleaning.
• 2-in-1 soft brush function for hard floors and short-pile rugs.
• Multi-stage cyclone separation system for efficient cleaning.
• Suitable for wood, carpet, tile floors, cars, and upholstery.

Safety Instructions

To reduce the risk of fire, electric shock, or injury, please observe the following safety precautions:

• Do not use outdoors or on wet surfaces.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer’s recommended attachments.
• Do not use with a damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Use extra care when cleaning on stairs.
• Do not use without dust cup and/or filters in place.
• Turn off all controls before unplugging.

Package Contents

Please check the box for the following components:

• 1 x Dibea D18 Main Machine
• 1 x Aluminum Tube
• 1 x Adaptor
• 1 x Brush Head
• 1 x Roller Brush
• 1 x Nozzle with brush Tool
• 1 x Long Crevice Tool
• 1 x Wall mount (Hanger)
• 1 x Wall Screw/Sticker
• 1 x User Manual

Image: All components included in the Dibea D18 package.

Setup

Assembly

1. Insert the aluminum tube into the main machine until it clicks into place.
2. Attach the desired brush head (e.g., wide floor brush) to the other end of the aluminum tube. Ensure it is securely fastened.
3. For handheld use, attach accessories like the nozzle with brush tool or long crevice tool directly to the main machine.

Image: The Dibea D18 vacuum cleaner with its main components and accessories.

Charging the Battery

The Dibea D18 is powered by a 2200 mAh high-capacity lithium-ion battery. Before first use, fully charge the battery.

• Connect the adaptor to the charging port on the main machine.
• Plug the adaptor into a power outlet.
• The charging indicator lights on the battery will show the charging status. A full charge typically takes 4-5 hours.
• The battery can be charged independently or while attached to the vacuum.

Image: Detail of the Dibea D18 battery and its charging indicator.

Wall Mounting

Use the provided wall mount to store your vacuum conveniently.

• Choose a suitable location near a power outlet if you plan to charge while mounted.
• Secure the wall mount to the wall using the provided screws or adhesive sticker.
• Hang the main machine onto the wall mount.

Image: The Dibea D18 vacuum cleaner stored on its wall-mounted hanger.

Operating Instructions

Powering On/Off and Speed Control

• Press the power button on the handle to turn the vacuum cleaner on.
• Press the speed control button to switch between the two available suction modes (standard and max mode).
• Press the power button again to turn the vacuum cleaner off.

Using Different Attachments

• Wide Floor Brush: Ideal for general cleaning on hardwood, tile, carpet, and laminate floors. The integrated LED lights illuminate the cleaning path.
• Long Crevice Tool: Perfect for reaching narrow gaps, corners, and tight spaces like car interiors or between sofa cushions.
• Nozzle with Brush Tool: Suitable for cleaning upholstery, curtains, and delicate surfaces.
• Anti Dustmite Brush Attachment: Use for deep cleaning mattresses, sofas, and other fabric surfaces to remove dust mites and allergens.

Image: The Dibea D18 in use for cleaning different areas of a home and car.

Maneuverability

The wide floor brush features a 270° rotation capability, allowing for easy navigation around furniture and into tight spaces without requiring large movements.

Image: Demonstration of the 270° rotation of the vacuum's brush head.

Maintenance

Emptying the Dust Bucket

The Dibea D18 has a 0.55 Liter large capacity dust bucket. For optimal performance, empty the dust bucket regularly, especially when it reaches the MAX fill line.

1. Ensure the vacuum cleaner is turned off.
2. Locate the dust bucket release button, usually near the handle.
3. Press the button to detach the dust bucket from the main unit.
4. Hold the dust bucket over a trash bin and press the bottom release latch to open the lid and empty the contents.
5. Close the lid and reattach the dust bucket to the main unit until it clicks securely.

Image: Illustration of the Dibea D18's large capacity dust bucket.

Cleaning the Filters

The Dibea D18 features an advanced multi-stage filtration system with a washable sponge filter and HEPA filtration. Regular cleaning of the filters is crucial for maintaining suction power and prolonging the service life of the vacuum.

1. Turn off the vacuum and detach the dust bucket.
2. Remove the filter components from the dust bucket. This typically includes a stainless steel wire mesh, a multi-stage cyclone separation system, and a high precision filter cotton.
3. Tap off loose dirt from all filter components over a trash bin.
4. Rinse the washable filter components under running water until the water runs clear. Do not use detergent.
5. Allow all filter components to air dry completely for at least 24 hours before reassembling. Do not use the vacuum with wet filters.
6. Reassemble the dry filters and reattach the dust bucket.

Image: Breakdown of the Dibea D18's multi-stage cyclone separation and filtration system.

Cleaning the Brush Head

• Turn off the vacuum and detach the brush head.
• Remove any tangled hair or debris from the roller brush using scissors or a cleaning tool.
• Wipe the exterior of the brush head with a damp cloth. Ensure no water enters the motor components.
• Allow to air dry completely before reattaching.

Troubleshooting

If you encounter issues with your Dibea D18, please refer to the following common problems and solutions:

Specifications

Warranty and Support

The Dibea D18 Cordless Stick Vacuum Cleaner comes with a Local Warranty for 2 years from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical support, warranty inquiries, or service requests, please refer to the contact information provided with your purchase documentation or visit the official Dibea support website.

Safety Mark: 180885-11