1. Introduction
This manual provides essential information for the safe assembly, operation, and maintenance of your Yaheetech Adjustable Swivel Bar Stools. Please read these instructions carefully before assembly and retain for future reference.

Image 1.1: The Yaheetech Adjustable Swivel Bar Stools (Set of 4, White).
2. Safety Information
WARNING: This product can expose you to chemical Di(2-ethylhexyl)phthalate (DEHP) and Lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/furniture.
- Ensure all parts are present and undamaged before assembly.
- Do not stand on the stool.
- Do not exceed the maximum weight capacity of 331 lb (150 kg) per stool.
- Keep children away from the assembly area. Small parts may pose a choking hazard.
- Use the stool on a flat, stable surface.
3. Package Contents
The Yaheetech Adjustable Swivel Bar Stools (Set of 4) package includes the following components:
- 4 x Seat Cushions with Backrests
- 4 x Gas Lift Cylinders
- 4 x Footrests
- 4 x Base Plates
- Assembly Hardware (screws, washers, etc.)
- Assembly Tool (e.g., Allen wrench)
4. Setup and Assembly
Assembly of the bar stools is designed to be straightforward. Please follow the step-by-step instructions provided in the included assembly guide. A digital version of the installation manual can be found here.
General Assembly Steps:
- Unpack all components and verify against the package contents list.
- Attach the seat cushion to the top plate of the gas lift mechanism using the provided screws.
- Insert the gas lift cylinder into the hole in the center of the base plate.
- Slide the footrest over the gas lift cylinder.
- Carefully place the assembled seat onto the top of the gas lift cylinder. Ensure it is securely seated.
- Test the stability and adjustability of the stool before use.

Image 4.1: Bar Stool Dimensions for assembly reference.
5. Operating Instructions
Adjusting Height:
To adjust the seat height, locate the lever under the seat. While seated, pull the lever upwards to lower the seat. To raise the seat, stand up slightly to relieve weight from the seat, then pull the lever upwards. The SGS-certified gas lift system ensures stable and effortless adjustment.
Rotating Seat:
The seat features a 360° rotation capability, allowing for easy movement and interaction without needing to reposition the entire stool.

Image 5.1: Details of the gas lift, base, and footrest.
6. Maintenance
Cleaning:
The water-resistant PU leather surface allows for easy cleaning. Simply wipe the surface with a damp cloth and a few drops of mild cleanser. Special leather care products are not required. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
General Care:
- Regularly check all screws and connections to ensure they remain tight. Retighten as necessary.
- Avoid prolonged exposure to direct sunlight to prevent fading of the PU leather.
- Protect the base from scratches by avoiding dragging the stool across rough surfaces.

Image 6.1: Seat cushion material and construction.
7. Troubleshooting
If you encounter any issues with your bar stools, please refer to the following common solutions:
- Stool feels wobbly: Ensure all assembly screws are securely tightened. Check that the base is on a flat, even surface.
- Height adjustment not working: Verify that the gas lift lever is correctly engaged and not obstructed. Ensure no excessive weight is on the seat when attempting to raise it.
- Squeaking noise: Apply a small amount of silicone lubricant to moving parts, such as the gas lift cylinder or swivel mechanism.
If problems persist, please contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 19.5"D x 17"W x 36.5"H |
| Color | White |
| Brand | Yaheetech |
| Size | Set of 4 |
| Style | Modern |
| Furniture Finish | White |
| Seat Height Range | 25" - 33.3" (Adjustable) |
| Seat Width | 17 Inches |
| Maximum Weight Recommendation | 330 Pounds (per stool) |
| Product Care Instructions | Wipe with Damp Cloth |
| Assembly Required | Yes |
| Number of Pieces | 4 |
| Item Weight | 31.5 pounds (total for set) |
| Model Number | YT-00094523 |

Image 8.1: Large metal base for enhanced stability.
9. Warranty Information
Yaheetech products are manufactured to high-quality standards. For specific warranty details, please refer to the documentation included with your purchase or visit the official Yaheetech website. Please retain your proof of purchase for any warranty claims.
10. Customer Support
If you have any questions, require assistance with assembly, or need further support, please contact Yaheetech customer service. Contact information can typically be found on the product packaging or the official Yaheetech website.
You can also visit the Yaheetech Store on Amazon for more information.





