Introduction
The LUTEC 3200 Lumen 32W LED Motion Activated Integrated Dual-Head Flood Light is an advanced outdoor lighting solution designed to enhance security and visibility around your home or property. This fixture combines powerful illumination with intelligent motion sensing and dusk-to-dawn capabilities, making it ideal for areas such as porches, patios, yards, garages, entryways, and driveways.
Its robust construction ensures durability and reliable performance in various outdoor conditions.
Safety Information
- Always turn off power at the circuit breaker before installation, servicing, or changing any part of the fixture.
- Ensure all electrical connections are secure and comply with local codes and ordinances.
- Do not look directly into the LED light source when the fixture is illuminated.
- Keep children away from the installation area.
- This product is designed for outdoor use in wet locations.
Package Contents
Your LUTEC Dual-Head LED Flood Light package includes:
- 1 x LUTEC Dual-Head LED Flood Light Unit (Bronze finish, integrated LED)
- Mounting Hardware
Setup & Installation
For detailed installation instructions, please refer to the official Installation Manual (PDF).
The flood light is designed for wall-mounted installation. Ensure the mounting surface is stable and capable of supporting the fixture's weight.
Image: Front view of the LUTEC Dual-Head LED Flood Light in bronze.
Important Sealing Information: While the light itself is waterproof in terms of structural design and material use, it is crucial to properly seal the connections between the light fixture and the wall to prevent water damage. Use an appropriate sealant (not included) around the mounting base.
Image: Illustration showing the importance of sealing connections between the light and the wall to prevent water damage.
Operating Instructions
PIR Motion Sensor
The integrated PIR motion sensor automatically activates the light when motion is detected within its 180° sensing angle. The sensing distance can be adjusted to three ranges: L (0-20ft), M (20-39ft), and H (39-59ft). The lighting duration after motion detection can also be set to 1, 3, or 10 minutes.
Image: Diagram illustrating the 180° sensing angle and maximum 59ft sensing range of the motion sensor.
Image: Close-up of the control dials for adjusting sensing distance (L, M, H) and lighting duration (1, 3, 10 min, Test, Dusk to Dawn).
Dusk to Dawn Mode
In this mode, the flood light remains on at a low brightness throughout the night. When motion is detected, it automatically switches to full brightness. During daylight hours, the motion sensor light deactivates to conserve energy.
Image: Visual representation of Test, Security, and Dusk to Dawn operating modes, showing light behavior during day and night, and upon motion detection.
Adjustable Design
The dual-head design allows for flexible adjustment of the light heads to direct illumination precisely where needed. This feature ensures optimal coverage for your desired area.
Image: The flood light mounted on a wall, with arrows indicating the adjustable movement of the light heads.
Maintenance
The LUTEC flood light is constructed from weather-resistant composite material, ensuring durability against outdoor elements. It is suitable for use in wet locations.
Image: The flood light illuminated during rainfall, highlighting its weather-resistant properties.
To maintain optimal performance and appearance, periodically clean the fixture with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electrical components.
Troubleshooting
- Light not turning on: Check the power supply at the circuit breaker. Ensure the sensor settings (Dusk to Dawn, Time) are correctly configured for current light conditions.
- Light stays on: Verify that the motion sensor is not obstructed and that there is no continuous motion within its detection range. Adjust the sensitivity settings if necessary.
- Light flickers: Ensure all electrical connections are secure. If flickering persists, consult a qualified electrician.
- Reduced sensing range: Check for obstructions in the sensor's field of view. Adjust the sensor's position or sensitivity setting.
If issues persist, please refer to the full installation manual or contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | LUTEC |
| Model Number | 7635202412 |
| Brightness | 3200 Lumens |
| Wattage | 32 Watts |
| Light Source Type | Integrated LED |
| Color Temperature | 4000K (Bright White) |
| Voltage | 120 Volts |
| Material | Aluminum, Polycarbonate |
| Finish | Bronzed Finish |
| Indoor/Outdoor Usage | Outdoor |
| Special Features | Anti-Rust, Dusk to Dawn, Motion Sensor, Water Resistant |
| Motion Sensor Angle | 180° |
| Motion Sensor Range | Up to 59 ft (adjustable) |
| Lighting Duration | 1, 3, or 10 minutes (adjustable) |
| Installation Type | Wall-mounted |
| Item Weight | 2.4 pounds |
| Package Dimensions | 10.08 x 7.64 x 7.48 inches |
Warranty & Support
The LUTEC Dual-Head LED Flood Light comes with a 5-year warranty, ensuring peace of mind regarding its quality and performance.
For any inquiries, technical assistance, or warranty claims, LUTEC provides 7*24h after-sales service. Please contact the manufacturer directly for support.
Additional protection plans may be available for purchase from retailers.
