VIVO DESK-V130EB Electric Triple Motor L-Shaped Standing Desk Frame

Introduction

This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your VIVO DESK-V130EB Electric Triple Motor L-Shaped Standing Desk Frame. Please read this manual thoroughly before installation and use to ensure safe and efficient operation. Keep this manual for future reference.

Safety Information

Observe the following safety guidelines to prevent injury or damage to the product:

• Exceeding the weight limit of 300 lbs may cause damage or injury.
• Improper assembly can lead to instability or malfunction.
• For safety, assemble the desk with two people, following the instructions provided.
• Be aware of the height range and main frame length to ensure stability.
• Keep children and pets away from the desk during operation.
• Ensure no obstacles are in the desk's path during height adjustments.

Package Contents

Verify that all components are present before beginning assembly:

• Main Desk Frame Components (legs, crossbars, side brackets)
• Control Box
• Digital Display Handset with Memory Presets
• Power Adapter and Cables
• Assembly Hardware (screws, bolts, washers)
• Cable Management Clips
• Instruction Manual

Setup and Assembly

Follow these steps to assemble your VIVO DESK-V130EB frame. A desktop surface (not included) is required for a complete workstation.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface.
2. Assemble Legs and Crossbars: Attach the three lifting columns to the main crossbars using the provided hardware. Ensure all connections are secure.
3. Attach Side Brackets: Secure the side brackets to the lifting columns. These brackets will support your desktop.
4. Install Control Box and Handset: Mount the control box and digital display handset to the underside of the desk frame in an accessible location. Connect all motor and power cables to the control box as indicated in the detailed assembly diagram.
5. Attach Desktop: Carefully place your L-shaped desktop onto the assembled frame. Ensure proper alignment and secure it using appropriate screws (not included, as desktop thickness varies). Recommended desktop thickness is 3/4 inch or greater.
6. Cable Management: Use the included cable management clips to organize and secure all power and motor cables, preventing tangles and ensuring a tidy workspace.

Figure 1: VIVO DESK-V130EB L-shaped desk frame components.

Figure 2: Adjustable frame dimensions for main and return desk sections.

Figure 3: Illustration of the triple motor system for smooth height adjustment.

Operating Instructions

The DESK-V130EB features an intuitive digital display handset for easy height adjustment and memory functions.

1. Adjusting Height: Use the Up (▲) and Down (▼) arrow buttons on the handset to manually raise or lower the desk to your desired height. The current height will be displayed on the digital screen.
2. Setting Memory Presets: The desk features 4 memory presets (1, 2, 3, 4) to save your preferred sitting and standing heights. To set a preset:
   a. Adjust the desk to your desired height using the Up/Down arrows.
   b. Press the M button, then immediately press one of the number buttons (1, 2, 3, or 4). The display will show 'S-' followed by the number, confirming the height is saved.
3. Recalling Memory Presets: To move the desk to a saved height, simply press the corresponding number button (1, 2, 3, or 4). The desk will automatically adjust to that height.
4. Collision Detection: The desk is equipped with a collision detection system. If the desk encounters an obstruction during adjustment, it will stop and reverse slightly to prevent damage.

Figure 4: Digital control panel with Up/Down arrows, memory presets (1-4), and 'M' button.

Figure 5: The desk frame smoothly adjusting to a standing height.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your desk frame:

• Cleaning: Wipe the frame with a dry cloth to remove dust and debris. Avoid abrasive cleaners or harsh chemicals.
• Cable Check: Periodically inspect all cables for any signs of wear or damage. Ensure they are securely fastened with cable management clips.
• Fastener Check: Occasionally check all screws and bolts to ensure they remain tight. Retighten if necessary.

Troubleshooting

If you encounter issues with your desk frame, refer to the following common problems and solutions:

Reset Procedure:

To perform a system reset, press and hold the Down (▼) button until the desk reaches its lowest position and then slightly rises and lowers again. Release the button. This typically recalibrates the motors.

Specifications

Warranty and Support

The VIVO DESK-V130EB Electric Triple Motor L-Shaped Standing Desk Frame comes with a 3-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use.

For technical assistance, troubleshooting, or warranty claims, please contact VIVO customer support. You can find contact information on the official VIVO website or through your purchase platform.

VIVO is committed to providing high-quality support and ensuring customer satisfaction.