EGLO Trago 12-S Square Flush Mount LED Ceiling Light Instruction Manual

Introduction

This instruction manual provides comprehensive guidance for the safe and efficient installation, operation, and maintenance of your EGLO Trago 12-S Square Flush Mount LED Ceiling Light. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Safety Information

WARNING:

This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

• Always turn off the main power supply at the circuit breaker before installing, servicing, or cleaning the fixture.
• Consult a qualified electrician if you are unsure about the installation process.
• Ensure all electrical connections are made in accordance with local codes and ordinances.
• Do not attempt to modify the fixture in any way.

Package Contents

Carefully unpack your new light fixture and ensure all components are present and undamaged. If any parts are missing or damaged, contact your retailer immediately.

• 1 x EGLO Trago 12-S Square Flush Mount LED Ceiling Light Fixture
• Installation Hardware (screws, wire nuts, etc. - may vary)
• Instruction Manual

Setup and Installation

The EGLO Trago 12-S is designed for easy installation as a flush mount ceiling or wall light. Assembly is required. Please follow these general steps for installation:

1. Prepare for Installation: Turn off power at the circuit breaker. Ensure the mounting surface is clean, dry, and structurally sound.
2. Mounting Bracket Installation: Attach the mounting bracket to the junction box using the provided screws. Ensure the bracket is securely fastened.
3. Electrical Connections: Connect the fixture's wires to your household wiring. Typically, this involves connecting the black wire from the fixture to the black (live) wire from the junction box, the white wire from the fixture to the white (neutral) wire from the junction box, and the ground wire from the fixture to the ground wire from the junction box. Secure connections with wire nuts.
4. Secure the Fixture: Carefully align the fixture with the mounting bracket and secure it in place. This fixture is lightweight and designed to connect directly to existing home wiring.
5. Restore Power: Once the fixture is securely installed and all connections are checked, restore power at the circuit breaker.

Figure 1: Product Dimensions. The fixture measures 11.38 inches (L) x 11.38 inches (W) x 0.59 inches (H).

Figure 2: Installed EGLO Trago 12-S light in a living room setting.

Operating Instructions

The EGLO Trago 12-S LED Ceiling Light is designed for straightforward operation.

• Power On/Off: Operate the light using a standard wall switch connected to the fixture's electrical circuit.
• Dimming Functionality: This fixture is compatible with most standard LED dimmers. To utilize the dimming feature, ensure you have an appropriate dimmer switch installed in your electrical system. Follow the dimmer manufacturer's instructions for installation and operation.
• Light Output: The integrated LED provides 2000 lumens of warm white light at 3000K color temperature.

Maintenance

Regular maintenance will help preserve the appearance and functionality of your EGLO Trago 12-S light fixture.

• Cleaning: Ensure the power is turned off before cleaning. Use a soft, dry, or slightly damp cloth to wipe the exterior surfaces of the fixture. Do not use abrasive cleaners, solvents, or polishes as these can damage the finish or electrical components.
• LED Light Source: The LED light source is integrated and not user-replaceable. If the LED fails, the entire fixture may need to be replaced.

Troubleshooting

If you encounter issues with your EGLO Trago 12-S light fixture, refer to the following common troubleshooting steps:

• Light Does Not Turn On:
  • Check the circuit breaker to ensure power is supplied to the fixture.
  • Verify that the wall switch is in the 'ON' position.
  • Ensure all electrical connections are secure. If unsure, consult a qualified electrician.
• Light Flickers or Dims Incorrectly:
  • If using a dimmer, ensure it is compatible with LED fixtures.
  • Check for loose wiring connections.
• Unusual Noise or Smell:
  • Immediately turn off power at the circuit breaker.
  • Contact a qualified electrician or EGLO customer support. Do not attempt to operate the fixture.

Specifications

Warranty Information

The EGLO Trago 12-S Square Flush Mount LED Ceiling Light comes with a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

For specific warranty terms and conditions, please refer to the documentation included with your product or contact EGLO customer support.

Customer Support

If you have any questions, require technical assistance, or need to report a problem with your EGLO Trago 12-S light fixture, please contact EGLO customer support.

For the most up-to-date contact information, please visit the official EGLO website or refer to your product packaging.

EGLO USA Website: https://www.eglo.com/usa/