Gecko in.k300 Electronic Keypad User Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Gecko in.k300 Electronic Keypad. The in.k300 is a compact, 4-button LCD control panel designed for Gecko's X and Y series spa and hot tub control systems. It offers a streamlined interface for managing essential spa functions.

2. Product Overview

The Gecko in.k300 keypad features a clear LCD display and four dedicated buttons for controlling your spa's functions. Its design prioritizes ease of use and clear visibility.

Figure 1: Gecko in.k300 Electronic Keypad. This image displays the rectangular keypad with a central LCD screen showing time and temperature. To the left are two buttons for Pump 1 and Pump 2, indicated by fan-like icons. To the right are two buttons for Light and Temperature adjustment, indicated by a snowflake/sun icon and up/down arrows respectively. The Gecko logo is visible in the bottom left corner.

3. Setup and Installation

The in.k300 keypad is designed for straightforward installation, typically involving a "plug and play" connection to compatible Gecko control systems. It comes with a 10-foot cable and an in.Link plug for easy integration.

3.1 Compatibility

This keypad is compatible with Gecko Y Class Systems and XE Systems manufactured from 2006 onwards. Verify your spa's control system model before installation to ensure compatibility.

3.2 Installation Steps

1. Power Off: Ensure the main power supply to your spa or hot tub is completely disconnected before beginning installation.
2. Locate Connection Port: Identify the in.Link port on your Gecko control system. Refer to your spa's main control system manual for its exact location.
3. Connect Keypad: Carefully insert the in.Link plug from the in.k300 keypad cable into the designated port on the control system. Ensure a secure connection.
4. Mount Keypad: Mount the keypad in its desired location on the spa's skirt or surface. Ensure the cable is routed safely and is not pinched or exposed to damage.
5. Power On: Once the keypad is securely connected and mounted, restore power to your spa. The keypad should power on and display information.

If the keypad does not power on or function correctly after installation, re-check all connections and ensure power is fully restored. Consult the troubleshooting section or your spa's main control system manual if issues persist.

4. Operating Instructions

The in.k300 keypad provides intuitive control over your spa's primary functions. The LCD screen displays essential information such as temperature and time, while the four buttons allow for easy operation.

4.1 Button Functions

• Pump 1 Button (Leftmost, fan icon): Press this button to cycle through the operating modes of Pump 1 (e.g., Off, Low Speed, High Speed).
• Pump 2 Button (Second from left, fan icon with '2'): Press this button to cycle through the operating modes of Pump 2 (e.g., Off, High Speed). This button is only active if your spa system includes a second pump.
• Light Button (Second from right, snowflake/sun icon): Press this button to turn the spa lights On or Off, or to cycle through different light modes if available.
• Temperature Button (Rightmost, up/down arrows): Use this button to adjust the desired water temperature. Pressing it will typically display the set temperature, and subsequent presses will increase or decrease the temperature setting.

4.2 LCD Display Information

The LCD screen provides real-time information about your spa's status:

• Temperature Display: Shows the current water temperature or the set temperature when adjusting.
• Time Display: Indicates the current time (AM/PM).
• Indicator Icons: Various icons may appear to indicate active functions such as heating, filtration cycles, or error codes. Refer to your spa's main control system manual for a complete list of icons and their meanings. Common icons include:
  • Snowflake: Indicates heating is active.
  • Water Droplets: May indicate a filtration cycle.
  • Exclamation Mark: Often indicates a warning or error.

For detailed information on specific spa modes, programming filtration cycles, or advanced settings, consult the comprehensive manual for your Gecko X or Y series control system.

5. Maintenance

Proper maintenance ensures the longevity and optimal performance of your in.k300 keypad.

• Cleaning: Gently wipe the keypad surface and LCD screen with a soft, damp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the display and buttons.
• Protection: While the keypad is designed for spa environments, avoid direct, prolonged exposure to extreme sunlight or harsh weather conditions if possible.
• Cable Inspection: Periodically inspect the keypad cable for any signs of wear, cuts, or damage. If damage is observed, contact a qualified technician for replacement.

6. Troubleshooting

If you encounter issues with your in.k300 keypad, refer to the following common problems and solutions:

For issues not covered here, or if troubleshooting steps do not resolve the problem, it is recommended to contact a qualified spa technician or Gecko customer support.

7. Specifications

• Model: in.k300
• Part Numbers: 0607-008040, BDLK3002OP, 3-00-7252
• Display Type: LCD
• Button Configuration: 4-Button (Pump1, Pump2, Light, Temp)
• Dimensions: Approximately 6.25" x 2.25" (Rectangle)
• Cable Length: 10 feet
• Plug Type: in.Link
• Compatibility: Gecko Y Class Systems & XE Systems (2006+)
• Manufacturer: Gecko

8. Warranty and Support

For information regarding the warranty period and terms for your Gecko in.k300 Electronic Keypad, please refer to the documentation provided with your purchase or contact the seller or Gecko directly. Support for this product is typically provided by the original equipment manufacturer (Gecko) or your spa dealer.

For technical assistance or to report a defect, please have your model number (in.k300) and part number (0607-008040) available when contacting support.