CKPSMS #P69D High Shank Sewing Machine Double Welt Piping Presser Foot Instruction Manual

1. Product Overview

The CKPSMS #P69D Double Welt Piping Presser Foot set is designed for industrial single needle sewing machines, enabling the creation of professional double welting and piping. This set includes three different sizes: 1/8 inch, 3/16 inch, and 1/4 inch, identified by the alternative part number 36069DG.

Key Features

• Precision Design: Engineered for accurate and consistent double welting and piping.
• High-Quality Construction: Made from durable metal for long-lasting performance.
• Multiple Sizes: Includes 1/8", 3/16", and 1/4" feet to accommodate various project needs.
• High Shank Compatibility: Specifically designed for high shank industrial and some home sewing machines.

2. Compatibility

This Double Welt/Piping Foot set is designed for high shank industrial single needle sewing machines. It is also compatible with many home sewing machines that utilize high shank presser feet. It is crucial to verify your machine's shank type before purchase.

Note: These feet are NOT compatible with low shank home sewing machines. High shank presser feet typically have a total height of 1-1/4 inches, while low shank feet are about 7/8 inches.

Partial List of Compatible Industrial Single Needle Sewing Machines:

For a comprehensive list of compatible models, please refer to the product listing or contact CKPSMS customer support.

3. Installation and Usage

Using the Double Welt/Piping Foot

This specialized foot is designed to sew piping or cording into seams, creating a raised decorative edge. The two channels on the underside of the foot guide the piping cord, allowing the needle to stitch closely alongside it.

1. Prepare Fabric and Cord: Cut fabric strips on the bias to cover your piping cord. Insert the cord into the fabric strip and fold the fabric over, aligning the raw edges.
2. First Pass (Piping Attachment): Place the fabric with the piping cord under the presser foot, ensuring the cord sits snugly in one of the foot's channels. Stitch along the edge of the cord.
3. Second Pass (Attaching to Project): Place the piped fabric onto your project fabric, right sides together. Align the raw edges. Stitch again, using the same channel on the presser foot to guide the needle precisely next to the piping, ensuring a clean finish.
4. Double Welting: For double welting, two cords are sewn parallel. The foot's design allows for consistent spacing between the two cords.

4. Maintenance and Care

Proper maintenance ensures the longevity and optimal performance of your presser feet and sewing machine.

• Cleaning: Regularly clean your presser feet to remove lint and debris. Use a soft brush or cloth.
• Storage: Store presser feet in a dry, clean environment to prevent rust and damage. The original packaging or a dedicated storage box is ideal.
• Inspection: Periodically inspect the feet for any signs of wear, bending, or damage. Replace if necessary to maintain stitch quality.

5. Troubleshooting

If you encounter issues while using the presser foot, consider the following:

• Uneven Stitching: Ensure the piping cord is seated correctly in the foot's channel. Check needle size and tension settings.
• Fabric Dragging: Verify that the presser foot is securely attached and that the feed dogs are engaged. Adjust presser foot pressure if your machine allows.
• Foot Not Fitting: Double-check your machine's shank type against the high shank requirement. Refer to the compatibility section.

6. Product Specifications

• Part Number: #P69D (Alternative: 36069DG)
• Sizes Included: 1/8 inch, 3/16 inch, 1/4 inch
• Shank Type: High Shank
• Material: Metal
• Package Dimensions: Approximately 2.3 x 1.9 x 1 inches
• Item Weight: Approximately 1.9 ounces

7. Warranty and Support

For any questions regarding product functionality, compatibility, or to inquire about warranty information, please contact CKPSMS customer support directly. We are committed to providing high-quality sewing machine parts and excellent service.