1. Safety Instructions
Read all instructions carefully before using the appliance. Keep this manual for future reference.
- Electrical Safety: Ensure the washing machine is connected to a properly grounded outlet. Do not use extension cords. Disconnect power before cleaning or maintenance.
- Water Safety: Ensure water inlet and drain hoses are securely connected to prevent leaks. Do not operate if there is a water leak.
- Child Safety: Keep children away from the appliance during operation. Do not allow children to play with the washing machine.
- Installation: Install the appliance on a firm, level surface. Remove all transit bolts before use to prevent excessive vibration and damage.
- Flammable Materials: Do not wash items that have been cleaned, washed, soaked, or spotted with combustible or explosive substances such as gasoline, dry-cleaning solvents, or other flammable materials.
2. Product Overview
The Daewoo DWC-AD1223 is a high-capacity front-load washing machine designed for efficient and thorough cleaning of your laundry. It features multiple wash programs and a durable metal construction.
Image: Front view of the Daewoo DWC-AD1223 washing machine, showcasing its silver finish and front-loading door.
Key Features:
- Type: Front Load
- Capacity: 15 kg
- Material: Metal drum and body
- Control Type: Push Button
- Wash Cycles: 12 pre-set programs
- Special Features: Large capacity, multiple wash programs
3. Setup and Installation
3.1 Unpacking
- Carefully remove all packaging materials.
- Remove the transit bolts located at the rear of the machine. Keep these bolts for future transport.
- Ensure all accessories, including inlet/drain hoses and power cord, are present.
3.2 Location Requirements
- Place the washing machine on a solid, level floor. Adjust the leveling feet to ensure stability.
- Ensure there is adequate space around the machine for ventilation and maintenance.
- Locate near a water supply (cold water tap) and a suitable drain.
3.3 Connecting Water Hoses
- Connect the inlet hose to the cold water tap and the corresponding inlet valve on the back of the washing machine.
- Tighten connections by hand, then use a wrench for a quarter turn to ensure a leak-free seal. Do not overtighten.
3.4 Connecting Drain Hose
- Position the drain hose into a standpipe or over the edge of a sink, ensuring it is securely fixed to prevent dislodgement during operation.
- The drain hose should be positioned at a height between 60 cm and 100 cm from the floor.
3.5 Power Connection
- Plug the power cord into a grounded electrical outlet.
- Ensure the voltage and frequency match the specifications of your household electrical supply.
4. Operating Instructions
4.1 Control Panel Overview
The control panel features a program selector, function buttons, and a display screen. Refer to the detailed diagram in your printed manual for specific button layouts.
4.2 Loading Laundry
- Open the washing machine door.
- Load laundry loosely into the drum, ensuring not to overload. Leave enough space for clothes to tumble freely.
- Close the door firmly until it clicks.
4.3 Adding Detergent and Additives
- Pull out the detergent dispenser drawer.
- Add the appropriate amount of detergent to the main wash compartment.
- Add fabric softener or other additives to their designated compartments, if desired.
- Push the dispenser drawer back in completely.
4.4 Selecting a Wash Program
- Turn the program selector knob or press the program buttons to choose one of the 12 available wash cycles (e.g., Cotton, Synthetics, Delicates, Quick Wash).
- Adjust additional settings like temperature or spin speed using the corresponding function buttons, if available for the selected program.
4.5 Starting a Wash Cycle
- Press the 'Start/Pause' button to begin the selected wash cycle.
- The machine will automatically proceed through the wash, rinse, and spin phases.
4.6 Pausing or Canceling a Cycle
- To pause a cycle, press the 'Start/Pause' button. Press again to resume.
- To cancel a cycle, press and hold the 'Start/Pause' button for a few seconds, or turn the machine off and then on again to select a new program.
4.7 End of Cycle
- The machine will signal the end of the cycle.
- Wait for the door lock to release before opening the door and removing laundry.
5. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your washing machine.
5.1 Cleaning the Detergent Dispenser
- Remove the dispenser drawer and rinse it under warm water to remove any detergent residue.
- Clean the housing of the dispenser drawer with a brush.
5.2 Cleaning the Drum
- Run a 'Drum Clean' cycle (if available) or a hot wash cycle with no laundry and a washing machine cleaner or a small amount of detergent.
- Leave the door slightly ajar after each wash to allow the drum to air dry and prevent odors.
5.3 Cleaning the Drain Pump Filter
- Locate the drain pump filter, usually at the bottom front of the machine.
- Place a shallow container underneath to catch any residual water.
- Unscrew the filter cover and carefully remove any lint, coins, or foreign objects.
- Clean the filter under running water and reinsert it securely.
5.4 Exterior Cleaning
- Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
6. Troubleshooting
Before contacting service, check the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not start | No power, door not closed, program not selected | Check power supply, ensure door is latched, select a program and press Start. |
| Water not filling | Water tap closed, inlet hose kinked, water pressure low | Open water tap, straighten hose, check household water pressure. |
| Water not draining | Drain hose kinked, drain pump filter blocked | Straighten drain hose, clean drain pump filter. |
| Excessive vibration/noise | Transit bolts not removed, machine not level, uneven load | Remove transit bolts, adjust leveling feet, redistribute laundry. |
| Error code on display | Specific malfunction | Refer to the full user manual for a list of error codes and their solutions. |
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | DWC-AD1223 |
| Brand | Daewoo |
| Type | Front Load Washing Machine |
| Washing Capacity | 15 kg |
| Control Type | Push Button |
| Number of Wash Cycles | 12 |
| Drum Material | Metal |
| Approximate Dimensions (H x W x D) | 110.01 cm x 86.01 cm x 70.01 cm |
| Approximate Weight | 90 kg |
| Included Components | Inlet/Drain Hoses, Power Cord, User Manual |
8. Warranty and Support
For warranty information, please refer to the warranty card included with your purchase or contact your retailer. Keep your proof of purchase for warranty claims.
For technical support or service inquiries, please contact Daewoo customer service or an authorized service center in your region. Contact details can typically be found on the manufacturer's official website or in your purchase documentation.
