Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Teletek AVA Keypad. Please read this manual thoroughly before attempting to install or operate the device to ensure proper functionality and safety.
The Teletek AVA Keypad is designed for use with compatible alarm systems, offering a user-friendly interface for system control.
Setup and Installation
Before beginning installation, ensure all components are present and undamaged. The package typically includes the AVA Keypad, an AC-AC power adapter, and mounting hardware.
Figure 1: Teletek AVA Keypad, AC-AC adapter (Type AC9A2, Input: AC 220-230V 50Hz, Output: AC 9V / 0.2A), and mounting screws with wall plugs. These components are essential for the installation and power supply of the keypad.
1. Mounting the Keypad
- Select a suitable indoor location for the keypad, away from direct sunlight, moisture, and extreme temperatures.
- Use the provided mounting screws and wall plugs to securely attach the keypad to a wall. Ensure the keypad is level.
- Route necessary wiring (e.g., communication bus) to the keypad's designated terminals. Refer to your alarm system's main control panel manual for specific wiring diagrams.
2. Power Connection
- Connect the AC-AC adapter (Type AC9A2) to the keypad's power input port.
- Plug the AC-AC adapter into a standard 220-230V AC 50Hz power outlet.
- Verify that the keypad powers on and displays initial boot-up information.
Operating Instructions
The Teletek AVA Keypad provides an interface for controlling your alarm system. Specific functions and codes will depend on your alarm system's configuration.
Basic Functions:
- Arming the System: Enter your user code followed by the 'Arm' button (or equivalent).
- Disarming the System: Enter your user code followed by the 'Disarm' button (or equivalent).
- Zone Status: Press the 'Status' button to view the current status of different zones.
- Panic/Emergency: Specific buttons or key combinations may trigger panic, medical, or fire alarms. Refer to your system's programming for details.
For advanced programming and user code management, consult the main alarm system control panel manual.
Maintenance
Regular maintenance ensures the longevity and reliable operation of your Teletek AVA Keypad.
- Cleaning: Use a soft, dry cloth to clean the keypad surface. Avoid abrasive cleaners or solvents, which can damage the display and buttons.
- Power Supply: Ensure the AC-AC adapter is securely plugged into both the keypad and the wall outlet. Do not use unauthorized power adapters.
- Environmental Conditions: Keep the keypad away from excessive heat, cold, humidity, and direct water exposure.
Troubleshooting
If you encounter issues with your Teletek AVA Keypad, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Keypad does not power on. | No power supply; faulty adapter; loose connection. | Check power outlet; ensure adapter is correctly connected; test adapter if possible. |
| Keypad unresponsive. | System communication issue; keypad malfunction. | Verify communication wiring to the main panel; restart the alarm system (if safe to do so). |
| Incorrect code entry. | User code entered incorrectly; code not programmed. | Re-enter code carefully; confirm user code with system administrator. |
If the problem persists, contact a qualified technician or your alarm system provider for assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand | Teletek |
| Model Number | AVA |
| Item Weight | 600 grams |
| Color | Black (Keypad housing is white, but display area is black as seen in image) |
| Power Input (Adapter) | AC 220-230V 50Hz |
| Power Output (Adapter) | AC 9V / 0.2A |
| Batteries Required | No |
| Batteries Included | No |
Warranty and Support
Information regarding specific warranty terms for the Teletek AVA Keypad is not provided in this document. Please refer to your purchase documentation or contact your retailer for warranty details.
For technical support or service, please contact the authorized Teletek distributor or your alarm system installer.
