QUINEAR Air Compression Leg Massager User Manual

Introduction

The QUINEAR Air Compression Leg Massager is designed to provide effective relief from fatigue and pain, improve leg circulation, and alleviate discomfort associated with conditions like Restless Leg Syndrome (RLS) and edema. Featuring 2x2 internal airbags, this device offers multiple massage methods to enhance your daily comfort and well-being. Its user-friendly design includes adjustable leg wraps and a simple handheld controller for a quiet and comfortable experience.

The QUINEAR Air Compression Leg Massager, featuring its main components: two leg wraps and a handheld controller.

Safety Information

For optimal safety and product longevity, please adhere to the following guidelines:

• Use the massager for a maximum of 15 minutes at a time.
• The device is equipped with an automatic shut-off function after 20 minutes to prevent overuse.
• Ensure all hoses are correctly connected before operating the device.
• This product is not compatible with pacemakers.

Package Contents

Upon unboxing your QUINEAR Air Compression Leg Massager, verify that all the following components are included:

• 2 x Air Compression Calf Massager Wraps
• 1 x Handheld Remote Controller
• 1 x Power Adapter (AC100-240V/DC12V 1A)
• 1 x User Guide
• 1 x Storage Bag

All items included in the QUINEAR Air Compression Leg Massager package.

Setup

Follow these steps to set up your leg massager:

1. Attach Leg Wraps: Place one compression wrap around each calf. The wraps are adjustable via Velcro to fit calf circumferences up to 21 inches. Ensure a snug but comfortable fit. The finely sewn fabric provides comfort during use.
2. Connect Hoses: Connect the air hoses from each leg wrap to the corresponding 'L' (Left) and 'R' (Right) ports on the bottom of the handheld controller.
3. Connect Power Adapter: Plug the power adapter into the designated port on the handheld controller, then plug the adapter into a standard electrical outlet (AC100-240V).

The leg wraps are easily applied and secured with Velcro.

Detailed view of the components and connection points.

Operating Instructions

The handheld controller allows you to customize your massage experience:

1. Power On/Off: Press the ON/OFF button to turn the massager on or off.
2. Select Mode: The controller offers 2 massage modes. Press the Mode button (labeled 1 and 2) to cycle through the available modes. Mode 1 typically provides a sequential compression, while Mode 2 offers whole leg compression.
3. Adjust Intensity: There are 3 intensity levels (Low, Mid, High). Press the Air Pressure button to adjust the intensity to your preferred level.
4. Automatic Shut-off: The massager will automatically shut off after 20 minutes of continuous use.

The handheld controller with clearly marked buttons for power, mode, and intensity.

Illustration of the air compression process within the wraps.

Maintenance

To ensure the longevity and optimal performance of your QUINEAR Air Compression Leg Massager, follow these maintenance tips:

• Cleaning: Wipe the exterior of the leg wraps and controller with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water.
• Storage: When not in use, store the massager in the provided mesh storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.
• Avoid Kinks: Ensure the air hoses are not kinked or twisted during storage or use, as this can affect performance.

Troubleshooting

If you encounter any issues with your massager, refer to the following common problems and solutions:

Specifications

Warranty and Support

QUINEAR is committed to providing high-quality health care products. For any product-related inquiries, technical support, or warranty claims, please refer to the contact information provided in your product's user guide or visit the official QUINEAR website. Keep your purchase receipt for warranty validation.