Introduction
The Razer Ripsaw HD is a high-performance game streaming capture card designed to enhance your content creation. It allows for 4K passthrough for uninterrupted gameplay and records in Full HD 1080P at 60 frames per second, ensuring high-quality video for your audience. This device offers seamless connectivity and advanced audio management for a streamlined streaming experience.
Image: The Razer Ripsaw HD Capture Card, a compact black device with the Razer logo, shown from a slight angle.
Key Features
- 4K 60 FPS Passthrough: Enjoy smooth, uninterrupted gameplay on your display while recording.
- Full HD 1080P at 60 FPS Recording: Capture high-definition video at a fluid 60 frames per second for powerful streaming performance.
- HDMI 2.0 & USB 3.0 Connectivity: Ensures zero latency output and maximum detail transfer.
- 3.5 mm Audio Cable: Facilitates easy, software-free audio setup.
- Full Audio Mixing Capabilities: Provides hassle-free audio management for your game and stream.
What's in the Box
The Razer Ripsaw HD package includes:
- Razer Ripsaw HD Capture Card
- USB 3.0 Type-C to Type-A Cable
- HDMI 2.0 Cable
- 3.5mm Audio Cable
- Quick Start Guide and Important Product Information Guide
Setup Guide
Follow these steps to set up your Razer Ripsaw HD capture card for streaming.
Step 1: Connect HDMI Input
Connect one end of the provided HDMI 2.0 cable to the HDMI IN port on the Razer Ripsaw HD. Connect the other end of this HDMI cable to the HDMI output of your gaming console (PC, PS4, Xbox One, Nintendo Switch, PS5, Xbox Series X|S).
Image: A top-down view of a gaming setup showing the Razer Ripsaw HD connected to a laptop, monitor, microphone, and headphones, illustrating 4K passthrough capabilities.
Step 2: Connect HDMI Output
Connect a second HDMI 2.0 cable (not included, or use the provided one if your setup allows) from the HDMI OUT port on the Razer Ripsaw HD to the HDMI input of your TV or gaming monitor. This provides the 4K passthrough for your gameplay.
Image: A gaming monitor displaying a game, with the Razer Ripsaw HD visible below it, highlighting its 1080P 60 FPS recording capability.
Step 3: Connect USB to Streaming PC
Connect the USB 3.0 Type-C end of the provided cable to the USB Type-C port on the Razer Ripsaw HD. Connect the USB Type-A end to an available USB 3.0 port on your streaming PC. This connection is essential for data transfer to your streaming software.
Image: A close-up of the back of the Razer Ripsaw HD, showing the USB-C, HDMI IN, and HDMI OUT ports, emphasizing its connectivity options.
Step 4: Connect Audio Devices
Plug your microphone into the 3.5mm microphone input jack and your headset into the 3.5mm headset output jack on the Razer Ripsaw HD. This allows for full audio mixing and monitoring during your stream.
Image: A close-up of the Razer Ripsaw HD with cables connected to its audio input/output ports, illustrating its audio mixing capabilities.
Image: A close-up of the Razer Ripsaw HD's audio ports, showing a 3.5mm audio cable connected, emphasizing easy setup.
Step 5: Install and Configure Software
Download and install your preferred streaming software (e.g., OBS Studio, XSplit Broadcaster) on your streaming PC. Within the software, add the Razer Ripsaw HD as a video capture device and configure your audio inputs.
Video: Official Razer Ripsaw HD Unbox and Setup Guide. This video demonstrates the physical connections and initial software setup for the capture card.
Video: Official Razer Ripsaw HD Setup Guide. This video provides a detailed walkthrough of connecting the Ripsaw HD and configuring it for streaming.
Operating Instructions
Starting a Stream/Recording
- Ensure all cables are securely connected as per the setup guide.
- Launch your streaming software (e.g., OBS Studio).
- Select the Razer Ripsaw HD as your video and audio input source.
- Configure your desired streaming or recording settings (resolution, bitrate, frame rate).
- Start your game on the console.
- Initiate streaming or recording from your software.
Audio Mixing
The Razer Ripsaw HD allows for independent control of game audio, microphone audio, and chat audio. Adjust these levels within your streaming software to achieve the desired mix for your audience and your monitoring headset.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the device. Avoid abrasive cleaners or solvents.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Cable Management: Ensure cables are not kinked or strained to prevent damage.
Troubleshooting
No Video Signal
- Check all HDMI connections. Ensure they are securely plugged into the correct IN and OUT ports.
- Verify that your gaming console is powered on and outputting video.
- Ensure your streaming software has selected the Razer Ripsaw HD as the video capture device.
- Try using different HDMI cables to rule out cable issues.
No Audio
- Check all 3.5mm audio connections for your microphone and headset.
- Verify audio settings within your streaming software. Ensure the Razer Ripsaw HD audio input is selected and not muted.
- Adjust volume levels on your console, PC, and streaming software.
Lag or Stuttering Video
- Ensure your PC meets the minimum system requirements, especially for CPU and RAM.
- Confirm the USB 3.0 cable is connected to a USB 3.0 port on your PC. USB 2.0 ports may not provide sufficient bandwidth.
- Reduce the resolution or bitrate settings in your streaming software.
- Close unnecessary applications running in the background on your streaming PC.
Specifications
| Brand | Razer |
| Model Name | Razer Ripsaw HD - Game Capture Card |
| Model Number | RZ20-02850100-R3U1 |
| Hardware Interface | 3.5mm Audio, HDMI, USB Type C |
| Video Capture Resolution | 1080p |
| 4K Passthrough | Yes, up to 60 FPS |
| Compatible Devices | PC, PS4, Xbox One, Nintendo Switch, Xbox Series X|S, Playstation 5 |
| Minimum System Requirements | USB 3.0 and HDMI 2.0 interfaces |
| Item Weight | 5.28 ounces |
| Item Dimensions | 4.14 x 3.35 x 0.63 inches |
Warranty and Support
The Razer Ripsaw HD comes with a 1-year manufacturer's warranty. For technical support, driver downloads, or further assistance, please visit the official Razer support website or refer to the contact information provided in your product's Important Product Information Guide.
You can also find additional resources and community support at razer.com/get-started.
Compatibility
The Razer Ripsaw HD is compatible with a wide range of gaming platforms and streaming software:
- Consoles: PlayStation 4, PlayStation 5, Xbox One, Xbox Series X|S, Nintendo Switch
- PC: Requires a USB 3.0 port and HDMI 2.0 interface.
- Streaming Software: Compatible with popular broadcasting applications such as OBS Studio, XSplit Broadcaster, and others.
