Tork DX900

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Tork DX900 Advanced Xpressnap Dispenser Napkin User Manual

Model: DX900

1. Introduction

This manual provides essential information for the proper use, handling, and storage of Tork DX900 Advanced Xpressnap Dispenser Napkins. These interfold, 1-ply napkins are designed for use with compatible Tork Xpressnap dispensers, offering efficient and hygienic napkin dispensing.

Tork DX900 Advanced Xpressnap Dispenser Napkins, showing a stack of white napkins and several brown paper wrapped packs.

Figure 1: Tork DX900 Advanced Xpressnap Dispenser Napkins (individual stack and packaged cases).

2. Product Features

  • Interfold Design: Ensures one-at-a-time dispensing, reducing consumption and waste.
  • 1-Ply Construction: Provides effective absorbency for general use.
  • Dimensions: Each napkin measures 8.5 inches in length by 13.0 inches in width when unfolded.
  • Material: Made from recycled fiber, supporting environmental sustainability.
  • Packaging: Available in cases containing 6 packs, with 500 napkins per pack, totaling 3,000 napkins per case.
  • Compatibility: Specifically designed for use with Tork Xpressnap dispensers.
Six brown paper wrapped cases of Tork Xpressnap napkins, stacked neatly.

Figure 2: A full case of Tork DX900 Advanced Xpressnap Dispenser Napkins (6 packs).

3. Setup and Loading

3.1 Unpacking

  1. Carefully open the outer shipping carton.
  2. Remove the individual brown paper wrapped packs of napkins from the carton.
  3. Inspect packs for any damage. Do not use if packaging is compromised.

3.2 Loading into a Tork Xpressnap Dispenser

These napkins are designed for specific Tork Xpressnap dispensers. Refer to your dispenser's instruction manual for exact loading procedures. General steps include:

  • Open the dispenser cover or access panel.
  • Remove any remaining small stacks of old napkins.
  • Place a new, full stack of Tork DX900 napkins into the dispenser, ensuring the interfold design aligns with the dispenser's mechanism.
  • Close the dispenser cover securely.
Image showing Tork dispensers and a hand pulling a napkin, illustrating the 'Tork Vision Cleaning' concept.

Figure 3: Tork Xpressnap dispensers are designed for efficient napkin dispensing.

4. Operating Instructions

Once loaded into a compatible Tork Xpressnap dispenser, the napkins are ready for use. The interfold design allows for single-napkin dispensing.

  • To dispense a napkin, simply pull the exposed edge of the napkin from the dispenser opening.
  • The next napkin will automatically be presented for easy access.

5. Maintenance and Storage

5.1 Storage

To maintain product quality and hygiene:

  • Store napkins in their original, unopened packaging until ready for use.
  • Keep in a cool, dry place, away from direct sunlight and moisture.
  • Avoid storing near strong odors or chemicals, as napkins can absorb them.

5.2 Disposal

Used napkins should be disposed of in appropriate waste receptacles. As they are made from recycled fiber, they may be suitable for composting in facilities that accept paper products, depending on local regulations and the presence of food waste.

Diagram illustrating Tork's sustainability focus areas: Materials & packaging, Use & waste, and Carbon, with 'Hygiene for all' at the center.

Figure 4: Tork's commitment to sustainability, including responsible material use and waste management.

Infographic stating 'Tork Plastic Pledge' and '90%* of Tork packaging is made from renewable resources'.

Figure 5: Tork's Plastic Pledge highlights the use of renewable resources in packaging.

6. Troubleshooting

If you encounter issues with napkin dispensing, consider the following common solutions:

ProblemPossible CauseSolution
Napkins not dispensing smoothly.Incorrect loading; dispenser mechanism obstruction; non-compatible napkins.Ensure napkins are loaded correctly according to dispenser instructions. Check for any foreign objects inside the dispenser. Verify that you are using Tork Xpressnap napkins.
Multiple napkins dispensing at once.Napkins not properly interfolded; dispenser mechanism issue.Confirm the napkins are Tork DX900 interfold napkins. Re-load the stack carefully. If the problem persists, the dispenser may require maintenance.
Napkins tearing when pulled.Rough handling; dispenser edge damage.Pull napkins gently. Inspect the dispenser's dispensing edge for any sharp or rough areas.

7. Specifications

AttributeDetail
Product NameTork DX900 Advanced Xpressnap Dispenser Napkin
Model NumberDX900
BrandTork
Ply Rating1-Ply
Napkin Dimensions (L x W)8.5 inches x 13.0 inches (unfolded)
ColorWhite
MaterialRecycled Fiber
Unit Count (per case)3,000 Napkins (6 packs of 500)
Approximate Case Weight10 Pounds
ASINB07NQST2CD
First Available DateFebruary 13, 2019

8. Warranty and Support

For specific warranty information or product support, please refer to the official Tork website or contact Tork customer service directly. Ensure you have your product model number (DX900) and ASIN (B07NQST2CD) available when seeking support.

Tork is committed to providing high-quality products and support for its customers.

Image with text 'Minimize your environmental impact Maximize your business performance' and Tork logo.

Figure 6: Tork's commitment to environmental responsibility and business performance.

© 2024 Tork. All rights reserved.

This manual is for informational purposes only. Product specifications are subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.