Introduction
This instruction manual provides detailed guidance for the safe and proper installation, operation, and maintenance of your One For All TV Wall Bracket Mount WM4452. Please read this manual thoroughly before beginning installation and retain it for future reference.
Key Features
- Screen Size Compatibility: Suitable for all types of TVs (LED, LCD, Plasma) from 13 to 65 inches.
- Full Motion Adjustment: Features 180° turn (swivel) and 15° tilt for optimal viewing angles from any position.
- VESA Compatibility: Supports VESA mounting patterns from 100x100mm up to 400x400mm.
- Maximum Weight Capacity: Securely holds TVs up to 50 kg.
- Easy Installation: Includes all necessary mounting materials (screws, concrete anchors, spacers) for a straightforward setup in under 10 minutes.
Setup and Installation
Before You Begin
- Ensure you have all components listed in the 'Package Contents' section.
- Verify your TV's VESA mounting pattern and weight are within the bracket's specifications.
- Identify the type of wall you are mounting to (e.g., solid concrete, wood stud, plasterboard) and use appropriate tools and anchors. Consult a professional if unsure.
- Always use a spirit level to ensure accurate and level installation.
Package Contents
The One For All TV Wall Bracket Mount WM4452 comes with all essential mounting hardware for a complete installation:
- TV Wall Bracket Assembly
- TV Mounting Arms (2 pieces)
- Various Screws for TV attachment (M4, M6, M8)
- Spacers for TV attachment
- Concrete Anchors and Screws for wall mounting
- Washers
- Allen Key
- Installation Manual (this document)
Image: Included mounting materials for installation.
VESA Compatibility
VESA (Video Electronics Standards Association) is a standard for TV mounting holes. This bracket supports VESA patterns from 100x100mm to 400x400mm. Please measure the distance between the mounting holes on the back of your TV to confirm compatibility.
Image: VESA compatibility and maximum weight capacity details.
Installation Steps
- Prepare the Wall: Choose the desired mounting location. Use the provided drilling guide (often a cardboard template) to mark the drill holes on the wall. Ensure the marks are level using a spirit level. Drill holes of the appropriate size for the included concrete anchors or wood screws, depending on your wall type.
- Attach Wall Plate: Secure the main wall plate of the bracket to the wall using the provided screws and anchors. Ensure it is firmly attached and level.
- Attach TV Mounting Arms: Attach the two vertical TV mounting arms to the back of your television using the appropriate VESA screws and spacers. Ensure they are securely fastened.
- Mount TV to Wall Plate: Carefully lift the TV with the attached mounting arms and hook them onto the wall plate. Ensure the TV is securely seated on the bracket. Some models may have locking mechanisms; engage them if present.
- Adjust Position: Once mounted, you can adjust the TV's position. The bracket allows for 180° swivel and 15° tilt. Gently push or pull the TV to achieve your desired viewing angle.
Image: The One For All TV Wall Bracket Mount in an extended position.
Image: Illustrates the 180° turn capability and minimal wall distance.
Video: A product overview demonstrating the bracket's features, including its 180-degree turn and 15-degree tilt capabilities, and VESA compatibility.
Operation
The One For All TV Wall Bracket WM4452 offers flexible viewing options:
- Swivel (Turn): Gently pull the TV away from the wall and pivot it left or right to achieve a 180° viewing angle. This is ideal for viewing from different areas of a room or for corner installations.
- Tilt: Adjust the vertical angle of your TV by gently pushing the top or bottom of the screen. The bracket allows for a 15° tilt, which can help reduce glare or optimize viewing height.
Always handle the TV and bracket with care during adjustments to prevent damage or injury.
Maintenance
To ensure the longevity and safe operation of your TV wall bracket, follow these simple maintenance guidelines:
- Cleaning: Use a soft, dry cloth to wipe down the bracket. Avoid abrasive cleaners or solvents, which can damage the finish.
- Periodic Inspection: Periodically check all screws and connections to ensure they remain tight and secure. Over time, vibrations or frequent adjustments may cause slight loosening.
- Lubrication: The moving parts of the bracket are designed for smooth operation and generally do not require lubrication. If you notice any stiffness, contact customer support.
Troubleshooting
If you encounter any issues with your TV wall bracket, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| TV appears to sag or is not level after installation. | Wall plate not perfectly level; uneven weight distribution; loose connections. | Re-check the wall plate's levelness during installation. Ensure all screws securing the TV to the arms and the arms to the wall plate are tightened evenly. Some brackets allow for minor post-installation leveling adjustments; consult the specific diagram in your physical manual. |
| Difficulty swiveling or tilting the TV. | Tightened joints; obstruction. | Ensure no cables are snagged or obstructing movement. Check for any adjustment screws that might be overtightened. Do not force movement; if resistance persists, contact support. |
| Bracket feels unstable or wobbly. | Improper wall mounting; loose wall anchors; TV weight exceeds capacity. | Immediately remove the TV from the bracket. Re-evaluate the wall mounting. Ensure correct anchors for your wall type are used and are securely installed. Verify TV weight is within the 50kg limit. Re-install carefully. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | WM4452 |
| Screen Size Compatibility | 13 - 65 Inches |
| Maximum Weight Capacity | 50 kg |
| VESA Compatibility | 100x100 to 400x400 mm |
| Movement Type | Tilt, Swivel (Turn) |
| Maximum Tilt Angle | 15 Degrees |
| Maximum Swivel Angle | 180 Degrees |
| Product Dimensions | 48 x 60 x 43 cm |
| Product Weight | 5.36 kg |
| Material | Metal |
| Color | Black |
| Manufacturer | One For All |
| First Available | 9 April 2019 |
Warranty and Support
One For All products are manufactured to high quality standards. In the unlikely event of a defect, please refer to the warranty information provided with your purchase documentation. For technical support, troubleshooting assistance, or to inquire about replacement parts, please visit the official One For All website or contact their customer service department directly.
You can also find additional resources and frequently asked questions on the One For All Store on Amazon.
