Introduction
The PUR Plus Faucet Mount Replacement Filter (RF9999) is designed to provide cleaner, better-tasting water directly from your faucet. This filter utilizes a powerful 3-in-1 genuine PUR filtration technology, including natural minerals, activated carbon, and ion exchange material, to reduce a wide range of chemical and physical substances, such as lead, microplastics, and chlorine. Each filter is engineered to last for up to 100 gallons of water or approximately three months of regular use, ensuring consistent water quality.
Image: PUR Plus filter transforming tap water into cleaner, great tasting water.
This manual provides essential information for the proper installation, operation, and maintenance of your PUR Plus replacement filter to ensure optimal performance and longevity.
Setup and Installation
Proper installation of your PUR Plus replacement filter is crucial for effective filtration and to prevent leaks. Follow these steps to install your new filter:
- Prepare the Faucet Mount: If replacing an old filter, first remove the existing filter and twist off the back cover of your PUR faucet mount system.
- Insert New Filter: Carefully insert the new PUR Plus replacement filter into the device. Ensure it is seated firmly and correctly within the housing.
- Replace Cover: Twist the faucet system cover back onto the device, ensuring it is securely fastened. A proper seal is essential to prevent leaks.
- Flush the Filter: Before first use, run cold water through the newly installed filter for approximately 5 minutes. This flushes out any carbon fines and prepares the filter for optimal performance.
Image: Step-by-step guide for filter installation and replacement reminder.
For detailed instructions specific to your PUR faucet mount model, refer to the manual that came with your original faucet filtration system.
Operating Instructions
Once installed, your PUR Plus Faucet Mount Replacement Filter operates seamlessly with your PUR faucet filtration system. To obtain filtered water, simply activate the filter function on your faucet mount. The filter will immediately begin to purify the tap water as it passes through the multi-stage filtration system.
Image: A PUR faucet filter in use, highlighting its ability to reduce chlorine for improved taste.
The filter is designed for continuous use and provides on-demand filtered water for drinking, cooking, and other household needs. The flow rate may vary slightly depending on your household water pressure and the filter's age.
Maintenance
Regular replacement of your PUR Plus filter is essential to maintain optimal water quality and filtration performance. Each filter is designed to provide up to 100 gallons of filtered water or last for approximately 3 months, whichever comes first. Exceeding this lifespan can reduce the filter's effectiveness.
- Filter Replacement: Replace your filter every 3 months or after 100 gallons of use. Many PUR faucet systems include an electronic filter life indicator to help you track usage.
- Genuine PUR Filters: Always use genuine PUR Plus replacement filters. 'Off-brand' or generic filters are not tested or certified to meet PUR's rigorous filtration standards and may not effectively reduce contaminants. Look for the 'PUR Genuine Filter' seal to ensure authenticity.
Image: Emphasizing the importance of using genuine PUR filters.
Store unused filters in a cool, dry place away from direct sunlight.
Troubleshooting
If you experience issues with your PUR Plus Faucet Mount Replacement Filter, consider the following common problems and solutions:
- Slow Water Flow:
- Cause: The filter may be nearing the end of its lifespan and is becoming clogged with trapped contaminants.
- Solution: Replace the filter.
- Cause: Air bubbles trapped in the filter.
- Solution: Run cold water through the filter for a few minutes to release trapped air.
- Unpleasant Taste or Odor:
- Cause: The filter has reached its capacity and is no longer effectively removing contaminants.
- Solution: Replace the filter immediately.
- Cause: Filter was not flushed properly after installation.
- Solution: Run cold water through the filter for 5 minutes.
- Leaks from the Faucet Mount:
- Cause: The filter or faucet mount cover is not properly seated or tightened.
- Solution: Remove the filter and re-install it, ensuring it is securely in place and the cover is tightly twisted on. Check for any damaged O-rings on the faucet mount.
- Cause: Incompatible filter or damaged filter.
- Solution: Ensure you are using a genuine PUR replacement filter and inspect the filter for any visible damage before installation.
If these steps do not resolve the issue, please contact PUR customer support for further assistance.
Product Specifications
| Attribute | Detail |
|---|---|
| Brand | PUR |
| Model Number | RF99994SP |
| Material | Plastic |
| Product Dimensions | 9.3"D x 3.9"W x 5.9"H |
| Item Weight | 1.3 pounds |
| Color | Blue |
| Style | 4 Pack |
| Number of Pieces | 4 |
| Unit Count | 4.0 Count |
| Included Components | 4 replacement filters |
| Product Benefits | Reduces Contaminants (Lead, Microplastics, Chlorine, Mercury, etc.) |
| External Testing Certification | NSF, WQA |
| Compatible Water Purifier Models | PUR FM-2000B, PUR FM-2100B, PUR FM-2500V, PUR FM-2700G, PUR FM-2800N, PUR FM-3333B, PUR FM-3400B, PUR FM-3700, PUR FM-3700B, PUR FM-3800, PUR FM-3800B, PUR FM-4000B, PUR FM-4100B, PUR FM-9000B, PUR FM-9100B, PUR FM-9400B, PUR FM-9500, PUR FM-9600B, PUR Pur-0A1 |
| UPC | 723987999944 |
Warranty Information
Specific warranty details for PUR Plus Faucet Mount Replacement Filters are typically provided with the original faucet filtration system or on the product packaging. For the most current and comprehensive warranty information, please refer to the official PUR website or contact PUR customer support directly.
Customer Support
For technical assistance, product inquiries, or to report any issues with your PUR Plus Faucet Mount Replacement Filter, please contact PUR customer support. You can typically find contact information, including phone numbers and online support portals, on the official PUR website (www.pur.com) or on your product packaging.
When contacting support, please have your product model number (RF99994SP) and any relevant purchase information ready to facilitate a quicker resolution.
