1. Important Safety Information
Please read these instructions carefully before installation and use. Keep this manual for future reference.
- Electrical Safety: Always disconnect the main power supply before installation, maintenance, or changing the light bulb. Installation should be performed by a qualified electrician if you are unsure.
- Bulb Type: Use only E27 bulbs with a maximum wattage of 40W. Ensure the bulb is fully cooled before handling.
- Placement: This lamp is designed for indoor use only (IP20 rating). Do not expose to moisture or extreme temperatures.
- Cleaning: Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
- Glass Components: Handle glass components with care to prevent breakage.
2. Package Contents
Verify that all components are present before beginning installation:
- 1 x Eglo Pinto Oro Wall Lamp Fixture (Model 97839)
- 1 x Mounting Bracket
- Mounting Hardware (screws, wall plugs)
- 1 x User Manual
Note: An E27 light bulb is not included and must be purchased separately. Refer to section 3 for bulb specifications.
3. Specifications
| Brand: | Eglo |
| Model Number: | 97839 |
| Style: | Wall Lamp |
| Color: | Gold, Black |
| Shape: | Rectangular (overall design) |
| Material: | Steel Alloy, Glass |
| Finish Type: | Matte |
| Number of Lights: | 1 |
| Voltage: | 230 Volts |
| Specific Uses: | Home |
| Additional Features: | Dimmable (with compatible bulb) |
| Shade Color: | Gold |
| Shade Material: | Glass |
| Light Direction: | Up/Down (indirect) |
| Power Source Type: | Corded Electric |
| Switch Style: | Rocker |
| Switch Installation Type: | Wall Mount |
| Batteries Included/Required: | No |
| Bulb Type: | Incandescent, LED, or CFL (E27 base) |
| Bulb Base Type: | E27 |
| Max Wattage: | 40 Watts |
| IP Rating: | IP20 |
| Item Weight: | 845 g (1.86 lbs) |
| Dimensions (H x D x W): | 27 cm x 15 cm x 11 cm (approx. 10.63 in x 5.91 in x 4.33 in) |
Image: Eglo Pinto Oro Wall Lamp showing its dimensions (Height 27 cm / 10.63 inches, Depth 14 cm / 5.51 inches).
4. Setup and Installation
Follow these steps for safe installation of your Eglo Pinto Oro Wall Lamp:
- Prepare for Installation:
- Turn off Power: Locate the circuit breaker for the installation area and turn off the main power supply. Verify power is off using a voltage tester.
- Unpack: Carefully remove all components from the packaging and inspect for any damage.
- Tools Required (not included): Screwdriver, drill, pencil, measuring tape, wire strippers, voltage tester.
- Mount the Bracket:
- Position the mounting bracket on the wall at the desired location. Use a pencil to mark the drilling points.
- Drill holes at the marked points. Insert appropriate wall plugs if necessary.
- Secure the mounting bracket to the wall using the provided screws.
- Connect Wiring:
- Carefully pull the electrical wires from the wall through the center hole of the mounting bracket.
- Connect the lamp's wires to the household electrical wires according to local electrical codes (typically: Live to Live, Neutral to Neutral, Ground to Ground). Ensure all connections are secure.
- Attach the Fixture:
- Align the lamp fixture with the mounting bracket and secure it using the provided screws. Ensure the fixture is firmly attached to the wall.
- Carefully place the transparent outer glass shade and the gold inner shade onto the fixture, securing them as per the design (usually with small screws or clips).
Image: The Eglo Pinto Oro Wall Lamp, fully assembled and mounted on a wall.
- Install the Light Bulb:
- Screw an E27 bulb (max 40W) into the lamp holder. Do not overtighten.
- Ensure the bulb is compatible with dimming if you intend to use a dimmer switch.
Image: Detailed view of the lamp's interior, showing the E27 bulb holder and the gold leaf effect.
- Restore Power:
- Once installation is complete and all connections are secure, turn the main power supply back on at the circuit breaker.
5. Operating Instructions
The Eglo Pinto Oro Wall Lamp features an integrated rocker switch for convenient operation.
- To Turn On: Press the rocker switch to the 'ON' position.
- To Turn Off: Press the rocker switch to the 'OFF' position.
If a dimmable E27 bulb is installed and connected to a compatible dimmer switch (not included), you can adjust the light intensity using the dimmer control.
6. Maintenance
Regular maintenance ensures the longevity and appearance of your wall lamp.
- Cleaning:
- Always disconnect power before cleaning.
- Wipe the metal and glass surfaces with a soft, dry, lint-free cloth.
- Do not use harsh chemicals, abrasive cleaners, or polishes as they may damage the finish or glass.
- Bulb Replacement:
- Ensure the lamp is turned off and the bulb has completely cooled before attempting to replace it.
- Carefully unscrew the old E27 bulb and screw in a new one (max 40W).
- Inspection: Periodically check for any loose connections or signs of wear. If any issues are found, consult a qualified electrician.
7. Troubleshooting
If you encounter issues with your Eglo Pinto Oro Wall Lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not light up. |
|
|
| Light flickers. |
|
|
| Glass shade is loose. | Mounting screws for the shade are loose. | Carefully tighten the screws securing the glass shade. Do not overtighten. |
8. Warranty and Support
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Eglo website. Keep your proof of purchase for any warranty claims.
Manufacturer: EGLO
Contact: Refer to the official Eglo website or your retailer for support contact details.