Eglo 97331 Table Lamp Instruction Manual

1. Introduction

The Eglo 97331 Table Lamp is designed to provide ambient lighting for indoor spaces. This manual provides essential information for the safe installation, operation, and maintenance of your lamp. Please read these instructions carefully before use and retain them for future reference.

2. Safety Information

• This product is intended for indoor use only (IP20 rated). Do not expose to moisture or extreme temperatures.
• Always ensure the power supply is disconnected before installing, cleaning, or replacing the bulb.
• Use only bulbs with the specified base type (E14) and do not exceed the maximum wattage of 28W.
• Handle glass components with care to prevent breakage.
• Keep the lamp away from flammable materials.
• If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.

3. Package Contents

Verify that all components are present and undamaged:

• Eglo 97331 Table Lamp (Black steel base with opal glass sphere)
• Integrated cable switch
• Instruction Manual

Note: The light bulb is not included and must be purchased separately.

4. Setup and Installation

1. Unpack the Lamp: Carefully remove all components from the packaging. Inspect for any damage.
2. Install the Bulb:
   • Ensure the lamp is unplugged from the power outlet.
   • Gently unscrew the opal glass sphere from the lamp base to access the bulb socket.
   • Screw an E14 base bulb (max 28W, LED recommended) into the socket until secure.
   • Carefully reattach the opal glass sphere by screwing it back onto the base.
3. Placement: Place the lamp on a stable, flat surface indoors, away from direct moisture or heat sources.
4. Connect to Power: Plug the lamp's power cord into a suitable 240V AC power outlet.

This image shows the Eglo 97331 table lamp, featuring a black steel frame supporting a spherical opal glass shade. The power cord is visible at the base of the sphere.

5. Operating Instructions

To turn the lamp ON or OFF, use the integrated cable switch located on the power cord. Simply toggle the switch to the desired position.

6. Maintenance

• Cleaning: Disconnect the lamp from the power supply before cleaning. Use a soft, dry cloth to wipe the steel base and glass shade. Do not use abrasive cleaners or solvents, as these may damage the finish.
• Bulb Replacement: Follow the bulb installation steps in Section 4, ensuring the lamp is unplugged before replacing the bulb. Allow the old bulb to cool completely before handling.

7. Troubleshooting

• Lamp does not turn on:
  • Check if the lamp is securely plugged into a working power outlet.
  • Ensure the cable switch is in the 'ON' position.
  • Verify that the light bulb is correctly installed and not burnt out. Replace if necessary.
• Flickering light:
  • Ensure the bulb is screwed in tightly.
  • Try a different bulb to rule out a faulty bulb.

If problems persist, contact a qualified electrician or the manufacturer's customer support.

8. Specifications

9. Warranty and Support

Specific warranty information for the Eglo 97331 Table Lamp is not provided in the product details. For warranty claims, technical support, or inquiries regarding spare parts, please contact Eglo customer service directly or refer to the official Eglo website.