Introduction
This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your GoHawk AN4-X 2-Channel All-in-One Amplifier Motorcycle Stereo Speakers. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Image: GoHawk AN4-X Motorcycle Stereo Speakers, showing the two speakers, wired control, and power connectors.
Safety Information
Always prioritize safety during installation and operation. Ensure all connections are secure and properly insulated to prevent electrical hazards. Do not attempt to disassemble or modify the unit. Consult a professional if you are unsure about any installation steps.
- Ensure the motorcycle's power is off before installation.
- Do not expose the unit to extreme temperatures or direct flame.
- Keep wiring away from moving parts and heat sources.
- Verify correct polarity for all power connections.
Package Contents
Verify that all items listed below are included in your package:
- 1 x Master Speaker with Built-in Amplifier
- 1 x Slave Speaker
- 1 x Wired Control
- 1 x 3.5mm Audio AUX Cable
- 1 x SAE to Ring Terminal Power Cord
- 2 x Mounting Clamp (for 1 to 1-1/4 inch handlebars)
- 1 x User Manual (this document)
Setup
Mounting the Speakers
The GoHawk AN4-X speakers are designed for handlebar mounting. The included clamps support handlebars with a diameter of 1 inch to 1-1/4 inches. Ensure sufficient clearance and a secure fit.
- Select a suitable mounting location on your handlebar, ensuring the speakers do not obstruct controls or visibility.
- Attach the mounting clamps to the speakers and then secure them to the handlebar.
- Adjust the speaker angle for optimal sound projection. The mounts are 360° adjustable.
Image: GoHawk AN4-X speakers installed on a motorcycle handlebar, demonstrating their compact size and placement.
Image: Close-up view of the speaker's mounting bracket, highlighting the 360-degree adjustability and the robust cable connection.
Wiring Connections
The system features a built-in amplifier, requiring no external amplifier. Follow the wiring diagram carefully for correct connections.
- Connect the Master Speaker to the motorcycle's 12V power source using the provided SAE to Ring Terminal Power Cord. Ensure the inline fuse is accessible.
- Connect the Slave Speaker to the Master Speaker via the RCA male connector. The slave speaker cable is 70 inches long.
- Connect the Wired Control unit to the designated port on the Master Speaker.
- For AUX input, connect your audio device using the 3.5mm Audio AUX Cable to the AUX-IN port.
- For USB playback, insert a USB drive into the USB Female port.
Image: Detailed wiring diagram illustrating connections for the master speaker, slave speaker, wired control, AUX-IN, USB, and power supply with inline fuse.
Operating Instructions
Powering On/Off
Use the power button on the wired control to turn the system on or off. A long press may be required for initial power-up.
Bluetooth Pairing
The system supports Bluetooth 5.0 for wireless audio streaming.
- Ensure the GoHawk AN4-X system is powered on.
- On your smartphone or Bluetooth-enabled device, search for available Bluetooth devices.
- Select "GoHawk AN4-X" (or similar name) from the list to pair.
- Once paired, audio from your device will stream through the speakers. The wireless transmission range is greater than 15 meters.
AUX Input Usage
For wired audio connection, use the 3.5mm AUX audio jack.
- Connect one end of the 3.5mm audio AUX cable to the AUX-IN port on the system.
- Connect the other end to the headphone jack of your audio device.
- The system will automatically switch to AUX input mode.
USB Playback
The system supports USB drives for MP3 format playback. USB charging is not supported, and it does not support USB to phone for music playback.
- Insert a USB drive containing MP3 audio files into the USB port.
- The system will automatically detect and begin playing audio from the USB drive.
Wired Control Functions
The wired control unit provides convenient access to various functions:
- Power Button: Turns the system on/off.
- Volume Up/Down: Adjusts the audio volume.
- Play/Pause: Controls media playback.
- Next/Previous Track: Skips between audio tracks.
- Mode Button: Switches between Bluetooth, AUX, and USB input modes.
Image: Visual representation of key features including USB port, wired control, 3.5mm AUX input, IP56 waterproof rating, and Bluetooth wireless connectivity.
Maintenance
The GoHawk AN4-X speakers feature an advanced IP56 waterproof design, making them suitable for outdoor use. Proper maintenance ensures long-term performance.
- Cleaning: Wipe the speakers and control unit with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.
- Inspection: Periodically check all wiring connections for tightness and signs of wear or damage.
- Storage: If storing the motorcycle for an extended period, ensure the system is powered off and consider disconnecting it from the power source.
Troubleshooting
If you encounter issues with your GoHawk AN4-X system, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to the unit | Loose power connection, blown fuse, incorrect wiring. | Check power cord connections. Inspect the inline fuse and replace if blown. Verify correct polarity (+/-) of power wiring. |
| No sound from speakers | Volume too low, incorrect input mode, loose speaker connection, un-paired Bluetooth device. | Increase volume. Press the mode button to cycle through input sources (Bluetooth, AUX, USB). Ensure slave speaker is securely connected. Re-pair Bluetooth device. |
| Bluetooth connection issues | Device too far, interference, previously paired device connected. | Move device closer to the speakers. Turn off other Bluetooth devices. Disconnect from other paired devices. Try re-pairing. |
| Distorted sound | Volume too high, poor audio source quality, damaged speaker. | Reduce volume. Test with a different audio source. Inspect speakers for physical damage. |
| USB playback not working | Unsupported file format, USB drive not formatted correctly, USB drive not detected. | Ensure files are in MP3 format. Verify USB drive is properly formatted. Try a different USB drive. Note: USB charging and phone playback via USB are not supported. |
Specifications
Detailed technical specifications for the GoHawk AN4-X system:
| Feature | Specification |
|---|---|
| Model Name | AN4-X Black |
| Speaker Housing Size | 4.5 inches (W) x 5.5 inches (L) |
| Speaker Core Size | 3 inches |
| Input Voltage | DC 10-16 V |
| Rated Power | 2*20W @ 4Ω |
| Peak Power | 600W |
| Channel | 2.0 |
| Bluetooth Version | 5.0 |
| Wireless Transmission Range | > 15 meters |
| Response Frequency | 20Hz-20KHz |
| Signal-to-Noise Ratio (S/N) | >80dB |
| Water Resistance Level | IP56 Waterproof |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Mounting Type | Handlebar Mount (1 to 1-1/4 inch) |
| Connectivity | Bluetooth, 3.5mm AUX, USB (MP3 format only) |
| Weight | 4.9 pounds |
| Product Dimensions | 5.5"D x 4.5"W x 7"H |
Image: Detailed dimensions of the GoHawk AN4-X speakers and the wired control unit, including speaker diameter, length, and mounting bracket size.
Warranty Information
GoHawk products typically come with a limited warranty. For specific details regarding the warranty period and coverage for your AN4-X system, please refer to the warranty card included in your product packaging or contact GoHawk customer support directly. Protection plans may also be available for extended coverage.
Customer Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact GoHawk customer support. You can typically find contact information on the GoHawk official website or through the retailer where you purchased the product.
We recommend visiting the official GoHawk website for the most up-to-date support resources and contact details.
