Beyution NH312UP
NH312UP Remote Control User Manual
Model: NH312UP
Brand: Beyution
Product Overview
The Beyution NH312UP is a replacement infrared remote control designed for various Sanyo LCD LED HDTV TV models. This remote provides essential functions for controlling your television, offering a straightforward and effective user experience.
Image: Front view of the NH312UP remote control. This image displays the full layout of the remote, including the power button, number pad, volume and channel controls, navigation buttons, and other function keys.
Setup and Battery Installation
The NH312UP remote control is designed for immediate use upon battery installation. No programming or pairing is required.
Battery Requirements:
- Two (2) AAA alkaline batteries are required.
- For optimal performance and to avoid issues, use brand new alkaline batteries. Rechargeable batteries are not recommended as they may not provide sufficient power for consistent operation.
Installation Steps:
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards or press the latch to open it.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) ends align correctly with the markings inside the compartment.
- Close the battery compartment cover by sliding it back into place until it clicks securely.
Image: Back view of the NH312UP remote control with the battery compartment open. This image shows the empty battery slots and the mechanism for opening the cover.
Operating Instructions
The NH312UP remote control functions as a direct replacement for your original Sanyo TV remote. Most buttons will correspond to their standard functions.
Key Functions:
| Button | Function |
|---|---|
| Power (Red) | Turns the television on or off. |
| Source | Cycles through available input sources (HDMI, AV, Component, etc.). |
| PIC/SOUND MODE | Adjusts picture or sound modes. |
| CC | Activates or deactivates Closed Captions. |
| SLEEP | Sets a sleep timer for the television. |
| PIX SHAPE | Adjusts the aspect ratio or picture size. |
| Number Pad (0-9) | Direct channel selection. |
| PREV.CH | Returns to the previously viewed channel. |
| VOL +/- | Increases or decreases the volume level. |
| CH +/- | Changes the channel up or down. |
| Mute | Mutes or unmutes the television sound. |
| SAP | Selects Secondary Audio Program (SAP) or audio language. |
| BACK | Returns to the previous menu or screen. |
| MENU | Opens the television's main menu. |
| INFO | Displays current program information. |
| Navigation (Up/Down/Left/Right) | Navigates through menus and options. |
| OK | Confirms selections in menus. |
This remote is compatible with the following Sanyo TV models:
- FW32D08F, FW32D06F-B, FW50D36F-B
- FW32D06F, FW50D36F, FW50D48F
- FW55D25F, FW40D36F, FW43D25F
- FW43D47F, FW40D48F, FW40D36F-B
Maintenance
- Cleaning: Use a soft, dry cloth to clean the remote control. Do not use liquid cleaners or aerosol sprays, as they may damage the remote's internal components or finish.
- Battery Replacement: Replace batteries promptly when the remote's responsiveness decreases. Always replace both batteries at the same time with new alkaline batteries.
- Storage: If the remote will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the remote. Store in a cool, dry place.
- Avoid Exposure: Do not expose the remote control to direct sunlight, excessive heat, moisture, or extreme cold.
Troubleshooting
Common Issues and Solutions:
- Remote is not responding:
- Check Batteries: Ensure batteries are inserted correctly with the correct polarity (+/-). Replace with brand new alkaline batteries. Old or rechargeable batteries may not provide sufficient power.
- Line of Sight: Make sure there are no obstructions between the remote control and the TV's infrared sensor. The remote requires a clear line of sight to operate.
- TV Sensor: Verify that the TV's infrared sensor is not blocked or dirty.
- Remote Test: Point the remote at a digital camera (like a smartphone camera) and press any button. If you see a light flashing from the remote's emitter, it indicates the remote is sending a signal. If not, the remote may be faulty or batteries are dead.
- Some buttons are not working:
- This remote is a replacement and may not support all advanced functions of your original TV remote if those functions are specific to a smart TV platform or unique features not present on standard infrared remotes.
- Ensure the TV model is listed as compatible. If your TV model is not listed, some functions may not be fully supported.
Specifications
| Model Number | NH312UP (KCI-NH312UP) |
| Brand | Beyution |
| Compatible Devices | Sanyo LCD LED HDTV Televisions |
| Power Source | 2 x AAA Batteries (Alkaline recommended) |
| Product Dimensions | 7 x 2 x 0.7 inches |
| Item Weight | 2.08 ounces |
| Color | Black |
| Special Feature | Ergonomic design |
Warranty and Support
This product is a replacement remote control. For specific warranty information, please refer to the seller's policy at the time of purchase. Typically, replacement parts like this remote come with a limited warranty covering manufacturing defects.
Customer Support:
If you encounter issues not covered in this manual or require further assistance, please contact the seller directly through the platform where the purchase was made. When contacting support, please provide your order number and the specific model of your Sanyo TV.
Note: If your TV model number is not listed as compatible, please contact the seller before ordering to confirm compatibility.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.