1. Product Overview
The Mesqool Projection Alarm Clock (Model CR1001i) is an advanced digital alarm clock designed to provide clear time display and reliable wake-up functions. It is particularly beneficial for heavy sleepers, individuals with hearing impairments, and those who prefer a non-auditory alarm. Key features include a large LED display, an adjustable time projector, multiple alarm modes, and a USB charging port.
Figure 1.1: Mesqool Projection Alarm Clock with blue display and time projected onto a surface.
2. Package Contents
- 1 x Digital Projection Alarm Clock
- 1 x Bed Shaker
- 1 x US Adapter (5V/2A)
- 2 x Black Holders
- 1 x User Manual
3. Product Components and Controls
Figure 3.1: Front view of the alarm clock highlighting the large LED display and product dimensions.
Figure 3.2: Top view of the alarm clock with control buttons labeled.
Control Buttons:
- SET TIME / HOUR / MIN: Used for setting the current time.
- 12/24H: Toggles between 12-hour and 24-hour time formats.
- DIMMER: Adjusts the brightness of the main LED display (5 levels).
- DST: Activates or deactivates Daylight Saving Time.
- SNOOZE/OK: Snoozes the alarm or confirms settings.
- ALARM1 / ALARM2: Buttons for setting and activating Alarm 1 and Alarm 2.
- ALARM ON/PAUSE: Toggles alarm on/off or pauses the alarm.
- PROJECTION ON/FLIP/OFF: Controls the projection feature, including flipping the image.
- ROTATE/BRIGHTNESS (Projection Lens): Rotates the projection angle and adjusts projection brightness.
- FOCUS RING (Projection Lens): Adjusts the clarity/focus of the projected time.
- VOL+/-: Adjusts the volume of the buzzer alarm.
Ports:
- DC IN: Power input port for the included US Adapter.
- USB Charging Port: For charging external devices.
- VIBRATOR: Port for connecting the bed shaker.
4. Setup Guide
4.1 Power Connection
Connect the provided US Adapter to the DC IN port on the back of the alarm clock, then plug the adapter into a standard electrical outlet. The clock will power on and the display will illuminate.
Figure 4.1: The alarm clock is equipped with a 5V/2A adapter for power.
4.2 Battery Backup Installation
For time and alarm memory retention during power outages, install two AAA 1.5V batteries (not included) into the battery compartment located on the bottom of the clock. Ensure correct polarity (+/-) when inserting batteries.
Figure 4.2: Location of the AAA battery backup compartment.
4.3 Bed Shaker Connection
If using the bed shaker, plug its cable into the 'VIBRATOR' port on the back of the alarm clock. Place the bed shaker under your pillow or mattress for optimal vibration.
Figure 4.3: The alarm clock with the bed shaker connected, illustrating the three wake-up modes.
5. Operating Instructions
5.1 Setting the Time
- Press and hold the 'SET TIME' button until the hour digits begin to flash.
- Use the 'HOUR' button to adjust the hour.
- Use the 'MIN' button to adjust the minutes.
- Press 'SET TIME' again or 'SNOOZE/OK' to confirm and exit time setting mode.
5.2 12/24 Hour Format
Press the '12/24H' button to switch between 12-hour (with AM/PM indicator) and 24-hour time formats.
5.3 Daylight Saving Time (DST)
Press and hold the 'DST' button to activate or deactivate the Daylight Saving Time function. When activated, the time will advance by one hour.
5.4 Setting Alarms (Alarm 1 & Alarm 2)
The clock supports two independent alarms.
- Press and hold 'ALARM1' or 'ALARM2' until the alarm hour digits flash.
- Use the 'HOUR' and 'MIN' buttons to set the desired alarm time.
- Press 'ALARM1' or 'ALARM2' again to select the wake-up mode (Buzzer, Bed Shaker, or Both). The corresponding icon will appear on the display.
- Press 'SNOOZE/OK' to confirm the alarm setting.
Figure 5.1: The alarm clock supports dual alarms for different schedules.
5.5 Snooze Function
When the alarm sounds, press the large 'SNOOZE/OK' button to activate the snooze function. The alarm will pause for 9 minutes and then sound again.
Figure 5.2: Pressing the SNOOZE/OK button for a 9-minute snooze.
5.6 Display Brightness Adjustment
Press the 'DIMMER' button repeatedly to cycle through 5 levels of display brightness (L01 to L05), from dimmest to brightest. Select the level that suits your preference.
Figure 5.3: Visual representation of the 5 adjustable brightness levels for the main LED display.
5.7 Projection Features
The built-in projector allows you to display the time on your wall or ceiling.
- Activate/Deactivate: Press the 'PROJECTION ON/FLIP/OFF' button to turn the projection on or off.
- Adjust Angle: Rotate the projector lens 180 degrees to direct the time display to your desired surface (wall or ceiling).
- Flip Image: If the projected time appears upside down, short press the 'PROJECTION ON/FLIP/OFF' button to flip the image 180 degrees.
- Adjust Focus: Rotate the 'FOCUS RING' on the projector to achieve a clear and sharp image. The optimum projection distance is 4.9-9.8 feet (1.5-3 meters).
- Adjust Brightness: Use the 'ROTATE/BRIGHTNESS' dial on the projector to adjust the projection brightness (5 levels).
Figure 5.4: High definition projection lens with 180° rotation, image flip, and focus control.
Figure 5.5: The projector offers 5 levels of brightness for optimal visibility.
5.8 USB Charging Port
The USB charging port on the side of the clock allows you to charge your smartphone, tablet, or other digital devices while the clock is plugged into an outlet.
Figure 5.6: The integrated USB charging port allows you to power up your devices.
6. Maintenance
To ensure the longevity and optimal performance of your Mesqool Projection Alarm Clock, follow these simple maintenance guidelines:
- Regularly wipe the clock's surface with a soft, dry cloth to remove dust and fingerprints.
- Avoid using abrasive cleaners or solvents, as these can damage the finish.
- Keep the projector lens clean by gently wiping it with a microfiber cloth to maintain clear projection quality.
- Ensure the clock is placed on a stable, flat surface to prevent accidental falls.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Alarm is too loud. | Volume setting is too high. | Adjust the alarm volume using the VOL+/- buttons on the side of the clock. |
| Projected time is too bright or too dim. | Projection brightness setting is incorrect. | Adjust the projection brightness using the ROTATE/BRIGHTNESS dial on the projector. |
| Projected time is blurry. | Projection focus is not set correctly. | Rotate the FOCUS RING on the projector until the image is clear. Ensure optimal projection distance (4.9-9.8 ft). |
| Main display is too bright or too dim. | Display dimmer setting is incorrect. | Press the DIMMER button to cycle through the 5 brightness levels for the main display. |
| Time resets after power outage. | Battery backup not installed or batteries are dead. | Install two fresh AAA 1.5V batteries into the battery compartment. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Mesqool |
| Model Number | CR1001i |
| Color | Blue Digits, Blue Projection |
| Display Type | Digital LED |
| Power Source | Corded Electric |
| Battery Backup | 2 x AAA batteries (not included) |
| Product Dimensions | 3.58"W x 1.18"H |
| Item Weight | 14.1 ounces |
| Special Features | Adjustable Volume, Projection, Bed Shaker, USB Charging Port, Dual Alarms, Snooze, DST |
| Alarm Volume Range | 76dB to 106dB |
| Projection Distance | Optimal 4.9-9.8 ft (1.5-3 meters) |
9. Warranty and Support
Mesqool provides a 30-day return and refund policy, a one-year warranty, and free lifetime technical support for this product. For any inquiries or assistance, please refer to the contact information provided with your purchase or visit the official Mesqool website.
