1. Introduction
This manual provides essential information for the safe and efficient operation of your TerraBloom ECMF-150 6 Inch Inline Duct Fan. This fan is designed for versatile ventilation applications, including indoor grow facilities, vertical farms, heating/cooling transfer, drying, and air filtration. It features an energy-efficient EC motor and a variable speed controller for precise airflow management.
The ECMF-150 is built with a durable coated steel housing, offering resistance to rust and protection for internal components. Its design ensures efficient airflow with minimal noise, making it suitable for various environments.
Image: TerraBloom ECMF-150 6 Inch Inline Duct Fan with key performance indicators: 288 CFM airflow, 31-60 dBA noise level, 396 Pa static pressure, and 36 Watts power consumption.
Image: Noise level comparison chart for the TerraBloom ECMF-150, illustrating its quiet operation at the lowest speed setting (31 dB) compared to common sounds like whispering or a babbling brook.
2. Setup Instructions
2.1 Unpacking and Inspection
Carefully remove all components from the packaging. Inspect the fan and accessories for any signs of damage during transit. Ensure all listed components are present.
2.2 Mounting the Fan
The fan can be mounted using the included mounting bracket. Choose a stable location that can support the weight of the fan and any attached ducting. Secure the bracket to a solid surface using appropriate fasteners (not included). The fan can be installed horizontally or vertically.
Image: The TerraBloom ECMF-150 fan shown installed within a grow tent setup, connected to ducting for ventilation.
2.3 Connecting Ducting
Attach appropriate 6-inch ducting to both ends of the fan. Use duct clamps or tape to ensure a secure and airtight connection. Proper ducting installation is crucial for optimal airflow and efficiency.
2.4 Connecting the Variable Speed Controller
Connect the included variable speed controller to the fan's control port. Ensure the connection is firm. The controller allows for speed adjustments from 0% to 100%.
2.5 Power Connection
Plug the fan's power cord into a standard 120V AC electrical outlet. Ensure the outlet is properly grounded and meets local electrical codes.
