AIKE AK2630
AIKE Air Wiper Compact Hand Dryer User Manual
Model: AK2630-K
Product Overview
The AIKE Air Wiper Compact Hand Dryer, Model AK2630-K, is designed for efficient and hygienic hand drying in various settings. This compact unit features a powerful airflow for quick drying and durable construction for long-lasting performance. It operates on 110V and has a power input of 1400W-1650W.
Image: The AIKE Air Wiper Compact Hand Dryer in silver, demonstrating its powerful airflow drying hands.
Key Features
- Fast Drying: Dries hands within 10-15 seconds, providing quick and efficient operation.
- Compact Design: Space-saving dimensions suitable for limited areas while meeting commercial-grade requirements.
- Durable Construction: Made from ABS Polycarbonate, ensuring long-lasting strength, corrosion resistance, and durability against extensive use.
- Plug-and-Play Installation: Comes with a 60-inch (1.5m) power cord for simple plug-in setup. Note: This unit cannot be hardwired directly.
- Automatic Operation: Features a sensing distance of 110-130mm for touch-free activation.
- Smart-warm Wind: Provides comfortable warm air for drying.
Image: Visual representation of the hand dryer's fast drying capability and smart-warm air function.
Image: The compact design of the AIKE hand dryer, suitable for various installations.
Installation
The AIKE Air Wiper Hand Dryer is designed for straightforward installation. Please follow these steps carefully:
- Choose Location: Select a suitable wall location near a standard 110V-130V power outlet. Ensure the area is clear and allows for proper hand drying without obstruction.
- Mounting: Securely mount the hand dryer to the wall using appropriate hardware. Ensure it is level and firmly attached to prevent movement during use.
- Power Connection: Plug the attached 60-inch (1.5m) power cord directly into a compatible electrical outlet. Important: The power cord is not designed to be removed for hardwiring. Attempting to hardwire the unit may void the warranty and pose a safety risk.
- Initial Test: After mounting and plugging in, test the unit by placing your hands under the sensor area to ensure it activates correctly.
Image: An AIKE hand dryer properly installed on a wall, ready for use.
Operating Instructions
The AIKE Air Wiper Hand Dryer operates automatically for user convenience.
- Activation: Place your hands directly under the air outlet of the hand dryer. The infrared sensor will detect your hands within a sensing distance of 110-130mm and automatically activate the airflow.
- Drying: Keep your hands under the airflow, moving them gently to ensure all surfaces are dried. The powerful air volume of 100.8m³/h will dry your hands quickly, typically within 10-15 seconds.
- Deactivation: Once your hands are removed from the sensor area, the hand dryer will automatically turn off.
The unit features automatic heating for comfortable warm air, and includes over-time and overload protection for safe operation.
Maintenance
Regular maintenance ensures optimal performance and longevity of your AIKE hand dryer.
- Cleaning: Wipe the exterior surface of the hand dryer regularly with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the ABS Polycarbonate finish.
- Sensor Area: Keep the sensor area clear of dust and debris to ensure proper activation.
- Air Inlet/Outlet: Periodically check and clean the air inlet and outlet grilles to prevent dust buildup, which can affect airflow efficiency.
- Power Cord: Inspect the power cord for any signs of damage. If damaged, discontinue use and contact AIKE support.
Troubleshooting
If you encounter issues with your AIKE hand dryer, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Hand dryer does not activate. | No power; obstructed sensor; hands too far from sensor. | Check power outlet connection. Clear any obstructions from the sensor. Ensure hands are within the 110-130mm sensing distance. |
| Weak airflow or slow drying. | Blocked air inlet/outlet; internal issue. | Clean air inlet and outlet grilles. If problem persists, contact AIKE support. |
| Unit stops unexpectedly. | Over-time or overload protection activated. | Allow the unit to cool down. Ensure proper ventilation around the unit. |
For issues not listed here or if troubleshooting does not resolve the problem, please contact AIKE Support.
Specifications
Image: Technical specifications and dimensions of the AIKE AK2630S hand dryer.
| Specification | Value |
|---|---|
| Model | AK2630-K |
| Product Dimensions | 9.85 x 6.5 x 9.25 inches (250mm W x 165mm D x 238mm H) |
| Item Weight | 8.14 pounds (approx. 3.7 kg) |
| Voltage | 100V-130V |
| Input Power | 1400W-1650W |
| Frequency | 50/60Hz |
| Air Volume | 100.8 m³/h |
| Noise Level | 67dB |
| Sensing Distance | 110-130mm |
| Material | ABS Polycarbonate |
| Power Cord Length | 60 inches (1.5m) |
| Features | Automatic heating, over time & overload protection |
Warranty & Support
AIKE is committed to the quality of its products. For any assistance, questions, or concerns regarding your AIKE Air Wiper Compact Hand Dryer, please contact AIKE Support.
You may also refer to the official User Manual (PDF) for additional information and detailed diagrams.
For further information or to explore other AIKE products, visit the AIKE Store on Amazon.
Related documentsAK2630
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.